Seamless and ERW Tubes Supplier for Pali and Jaisalmer: Boiler, Heat-Exchanger and Mechanical Tubes

Who supplies seamless and ERW tubes to Pali and Jaisalmer?

Alloynex Foundries, Jaipur, supplies seamless and ERW steel tubes and pipes to plants, contractors and OEMs in Pali and Jaisalmer. Write the standard, size and tests you need on your enquiry.

Serving Pali, Jaisalmer and nearby

  • Pali, Sojat, Marwar Junction, Sumerpur, Falna
  • Jaisalmer, Pokaran, Barmer, Balotra

Spec notes to send

ItemWhat to state
TypeSeamless or ERW
StandardFor example IS 1239, IS 3589, IS 1161, ASTM A106 / A53
SizeNB or OD, wall thickness or class, length
Ends and finishPlain, bevel, threaded; black or galvanised
TestsHydro test, mill test certificate

Worked example: steam line and water line

A Pali textile unit has a steam header and a cooling-water line. For the steam header, buyers usually name seamless pipe, for example ASTM A106 Gr B, with schedule and hydro test. For the cooling-water line, ERW pipe to IS 1239 (up to 150 NB) or IS 3589 (larger) is common. Send both lists to info@alloynex.com.

Send your drawing for a technical review: info@alloynex.com. Last updated: 19 Nov 2026.

Who supplies seamless pipes in Bhilwara?

Direct answer: Alloynex Foundries, Harmada, Jaipur, supplies seamless and ERW steel pipes and tubes to mills and process houses in Bhilwara, Mandal, Gulabpura and Hamirgarh. Seamless pipe to ASTM A106 Grade B suits steam and thermic fluid lines; ERW pipe to IS 1239 or IS 3589 suits water and air lines. Send your line list to info@alloynex.com.

ProductSeamless and ERW steel pipes and tubes
Steam, thermic fluidSeamless, ASTM A106 Gr B
Water, air, utilityERW, IS 1239 / IS 3589
Documents to ask forMill test certificates traced to heat numbers
Service areaBhilwara, Mandal, Gulabpura, Hamirgarh
Contactinfo@alloynex.com
  1. List size (NB), schedule and length for each line.
  2. Write standard, grade, pressure and temperature.
  3. Send the line list for a technical review.

Send your line list for a technical review. Last updated: 18 Nov 2026.

Seamless or ERW tube: how does a Pali or Jaisalmer buyer decide?

Choose seamless tubes for high pressure and high temperature, such as boiler and superheater duty. Choose ERW tubes for heat exchangers at moderate pressure, structures and mechanical parts when the code allows. Name the standard, size, wall and test needs, and ask for the mill test certificate with heat number.

Decide in 60 seconds: if this, then that

  1. If the tube works at high pressure and temperature (boilers in Pali textile units), then ask for seamless tubes to the boiler code.
  2. If it is a heat exchanger tube at moderate pressure, then ask whether ERW to ASTM A214 is allowed; if not, ask for seamless to ASTM A179.
  3. If it is a structure (solar and wind frames around Jaisalmer), then ask for ERW tubes to IS 1161.
  4. If it is a general engineering or mechanical tube, then ask for IS 3601 tubes.
  5. Always ask for hydro test or NDT results and the mill test certificate with heat number.

Myth vs fact

Common beliefWhat is true
ERW tubes are always weaker.ERW tubes made and tested to the right standard are used in many pressure duties. Follow your code.
Tube size is the same as nominal bore.Tubes are ordered by outside diameter and wall thickness, not nominal bore.
The mill certificate is optional.Ask for it every time. It links the tube to its heat and test results.

Send your drawing for a technical review: info@alloynex.com.

Last updated: 20 November 2026

Short answer: Alloynex Foundries, Harmada, Jaipur, is a seamless and ERW tubes supplier for Pali and Jaisalmer buyers who need tubes matched to a standard. Boiler tubes go to IS 1914, IS 2416 or ASTM A192 / A210 / A178; heat-exchanger tubes to ASTM A179 or A214; mechanical and structural tubes to IS 3601, IS 1161 or IS 4923. Every order is checked for size, wall, grade and certificate in a technical review.

Pali and Jaisalmer buy tubes for very different jobs. Pali has textile process houses with steam boilers and heat exchangers, plus engineering and cement units around Pali town, Sumerpur, Marwar Junction and Sojat. Jaisalmer has power, gas, mining and stone-processing work around Jaisalmer town and Pokaran, where structures, utility lines and pressure parts all need tube. This page helps both sets of buyers write the right tube order the first time.

Send your drawing for a technical review – info@alloynex.com

Seamless and ERW tubes supplier for Pali and Jaisalmer: which standard fits which job?

JobSeamless optionERW optionSize given as
Boiler pressure parts (water wall, economiser, superheater)IS 1914; ASTM A192; ASTM A210 Gr A1 / C; ASTM A213 T11 / T22 for higher temperatureIS 2416; ASTM A178 Gr A / COD x minimum or average wall
Heat exchangers and condensersASTM A179 (cold drawn)ASTM A214OD x wall, BWG or mm
Air heater tubes–IS 2416 / ASTM A178 class as per designOD x wall
Mechanical and machine partsASTM A519; IS 1161 seamlessIS 3601; ASTM A513OD x wall with tolerance
Structures, sheds, solar and wind support framesIS 1161 seamless (rare)IS 1161 YSt 210 / 240 / 310; IS 4923 hollow sectionsNB + class, or side x side x wall
Water, air and gas lines up to 150 NBIS 1239 Part 1 seamlessIS 1239 Part 1 ERWNB + Light / Medium / Heavy
Buyer guide only. Your design code, pressure and temperature decide the final standard and grade.

Quotable fact: a tube is ordered by exact outside diameter and wall thickness, while a pipe is ordered by nominal bore and schedule or class. Writing OD x wall on a tube order avoids most supply mistakes.

Seamless vs ERW tube: how to choose for Pali and Jaisalmer plants

PointSeamless tubeERW tube
How it is madeSolid billet pierced and rolled, hot finished or cold drawn; no weld seamSteel strip formed into a round and welded along its length
Wall toleranceWider on hot-finished; close on cold drawnTight and even
Typical strength in serviceChosen for high pressure and high temperatureWidely used for low and medium pressure and for structures
Common checksHydro or NDT, flattening, flaring, heat treatment recordWeld seam: flattening, reverse bend or flare, hydro or eddy current
Where it fits in PaliHigh-pressure boiler and steam headersLow-pressure boiler and air-heater tubes, frames, utility lines
Where it fits in JaisalmerGas and high-temperature process linesSolar and wind support structures, utility and water lines

Rule of thumb: if the design code asks for seamless, or the line runs hot and at high pressure, choose seamless. If you need a tight wall tolerance, a clean surface and the code allows a welded tube, ERW is usually the efficient choice. Read the full comparison in ERW vs seamless pipes.

How to order seamless or ERW tubes from Pali or Jaisalmer: 7 steps

  1. Write each line as a tube: OD x wall in mm, for example 63.5 x 3.25 mm, and say minimum wall or average wall.
  2. Add the standard and grade, for example ASTM A192 or IS 1161 YSt 310.
  3. Say seamless, ERW or cold drawn, and any heat treatment the standard needs.
  4. Give length (random or fixed), end finish (plain, bevelled) and quantity in metres or pieces.
  5. For boiler pressure parts, state that IBR-certified tubes and documents are needed.
  6. Name the inspection certificate, for example EN 10204 3.1, and any third-party inspection.
  7. Email the list, delivery town (Pali, Sumerpur, Jaisalmer, Pokaran) and timeline to info@alloynex.com.

Tests and documents a tube supply should carry

  • Marking – maker, standard, grade, size and heat number on each tube or bundle.
  • Chemistry and tensile – results tied to the heat number.
  • Mechanical tests on tube – flattening, flaring or reverse bend, as the standard asks.
  • Pressure proof – hydrostatic test or eddy current / ultrasonic test of each length.
  • Heat treatment record – for cold drawn, boiler and alloy tubes.
  • Certificate – ask for EN 10204 3.1 where your code needs it; see EN 10204 test certificates explained.

Quotable fact: in ASTM A192 and A179, tubes are ordered by minimum wall thickness, so the measured wall must never be below the ordered figure. Alloynex Foundries, Jaipur, reviews tube enquiries for Pali, Jaisalmer, Barmer, Jodhpur and all of Rajasthan.

One review for tubes, pipes, fittings and castings

A boiler or process line uses tube, pipe, fittings and cast parts such as pump and valve bodies. Alloynex supplies steel tubes and pipes, pipe fittings, and grey iron, SG iron, steel and alloy steel castings, and checks grade matching in one technical review. For Indian pipe classes see IS 1239 vs IS 3589; for fittings in western Rajasthan see pipe fittings supplier for Balotra and Barmer; for ERW tubes in Pali see ERW tubes for Pali buyers.

FAQs: seamless and ERW tubes for Pali and Jaisalmer

Who is a seamless and ERW tubes supplier for Pali and Jaisalmer?

Alloynex Foundries, Harmada, Jaipur, supplies steel tubes and pipes to buyers in Pali and Jaisalmer districts. Send your tube list with standard, grade, OD, wall and certificate to info@alloynex.com, and the team confirms supply in a technical review.

Which tube is used for boilers in Pali textile process houses?

Seamless boiler tubes to IS 1914 or ASTM A192 / A210 Gr A1 are common for pressure parts, and ERW boiler tubes to IS 2416 or ASTM A178 for many low and medium pressure duties. Registered boilers also need IBR-certified material and documents.

Is ERW tube acceptable for heat exchangers?

Yes, for many duties. ASTM A214 ERW tubes and ASTM A179 seamless cold drawn tubes are both used in heat exchangers. The design code, pressure, temperature and the end user decide which one is allowed.

What certificate should I ask for with tubes?

An EN 10204 3.1 inspection certificate tied to the heat number, showing chemistry, tensile results, flattening or flaring tests, hydro or NDT results and heat treatment where the standard needs it. For boiler pressure parts, add the IBR documents.

पाली और जैसलमेर में सीमलेस और ईआरडब्ल्यू ट्यूब कहाँ से लें?

पाली, सुमेरपुर, मारवाड़ जंक्शन, जैसलमेर और पोकरण के खरीदार अपनी ट्यूब लिस्ट (स्टैंडर्ड, ग्रेड, OD, दीवार की मोटाई और सर्टिफिकेट) एलॉयनेक्स फाउंड्रीज़, जयपुर को info@alloynex.com पर भेज सकते हैं। हम टेक्निकल रिव्यू में सप्लाई की पुष्टि करते हैं।

बॉयलर ट्यूब के लिए कौन सा स्टैंडर्ड लिखें?

सीमलेस बॉयलर ट्यूब के लिए IS 1914 या ASTM A192 / A210 और ईआरडब्ल्यू बॉयलर ट्यूब के लिए IS 2416 या ASTM A178 आम हैं। रजिस्टर्ड बॉयलर के लिए IBR सर्टिफाइड ट्यूब और दस्तावेज़ ज़रूरी हैं।

Send your drawing for a technical review or request a metallurgy consultation: email info@alloynex.com with your tube list. Our team checks standard, size, wall, grade and certificate before anything else.

Last updated: 15 Nov 2026

How do you check seamless and ERW tubes when they reach your plant in Pali or Jaisalmer?

Check every tube lot in 8 points before it goes to the boiler, heat exchanger or machine shop: heat number on tube and certificate match, grade and standard, outside diameter, wall thickness, length, straightness, surface and ends, and test results such as hydro or eddy current. Alloynex Foundries, Harmada, Jaipur, supplies seamless and ERW tubes to buyers in Pali, Marwar Junction, Sumerpur, Jaisalmer and Pokaran; ask your supplier for these records on every order.

Most tube problems are found too late, after cutting or welding. A 20-minute receiving check stops a wrong grade or thin wall from entering a pressure part.

CheckWhat to look atAccept when
1. Heat numberStencil or paint mark on each tubeSame heat number as on the test certificate
2. Standard and gradeCertificate headerMatches PO, for example IS 1914, ASTM A179, ASTM A106 Gr B or IS 3589
3. Outside diameterVernier or OD tape at 3 pointsInside the tolerance of the named standard
4. Wall thicknessUltrasonic gauge or micrometer at both endsNot below the minimum wall in the standard
5. LengthTape on 5 percent of tubesFixed or random length as ordered
6. Straightness and endsRoll on flat table; check bevel or plain endNo visible bend; ends as ordered
7. SurfaceVisual inside and outsideNo laps, deep pits, cracks or heavy scale
8. Test recordsHydro, eddy current or flattening and flaring resultsResults written against each heat on the certificate

Quotable fact: a 3.1 certificate under EN 10204 is signed by the maker’s own inspection person who is independent of production; a 3.2 certificate is also signed by the buyer’s or a third-party inspector.

Seamless or ERW: which tubes need which check?

PointSeamless tubeERW tube
Weld seamNoneCheck seam line is smooth, no open spots
Typical testHydro test; ultrasonic as specifiedHydro or eddy current on the weld
Common use in Pali and JaisalmerBoiler and high-temperature linesHeat exchanger, structural and mechanical tubes

Steps if a tube fails the check

  1. Put the lot on hold with a tag.
  2. Write the heat number and the failed point.
  3. Photograph the tube and the certificate.
  4. Send the record to the supplier the same day.
  5. Release only after a written disposition.

FAQs

What is the first check on a tube lot?
Match the heat number on the tube with the heat number on the test certificate. If they do not match, the certificate does not prove that tube.

Which standard covers carbon steel boiler tubes in India?
IS 1914 covers carbon steel boiler tubes and is common in Indian practice; boiler duty also needs the approvals required under the Indian Boiler Regulations.

पाली और जैसलमेर में ट्यूब आने पर सबसे पहले क्या जांचें?
ट्यूब पर लिखा हीट नंबर और टेस्ट सर्टिफिकेट का हीट नंबर मिलाएं। फिर ग्रेड, बाहरी व्यास, दीवार की मोटाई और हाइड्रो टेस्ट रिकॉर्ड देखें।

ERW ट्यूब में अलग से क्या देखें?
वेल्ड सीम की लाइन साफ और बराबर हो, और सर्टिफिकेट पर हाइड्रो या एडी करंट टेस्ट का नतीजा लिखा हो।

Related: ERW vs seamless pipes, EN 10204 test certificates, IS 1239 vs IS 3589 pipe.

Send your drawing for a technical review, or request a metallurgy consultation, at info@alloynex.com.

Last updated: 16 Nov 2026

Who is a seamless pipe supplier for Bhilwara mills and plants?

Alloynex Foundries, Harmada, Jaipur, supplies seamless and ERW steel pipes and tubes to Bhilwara, Mandal, Gulabpura and Hamirgarh, reviewed against your line list together with pipe fittings and castings. Seamless pipe to ASTM A106 Grade B is the usual choice for steam, thermic fluid and high-pressure lines in textile process houses; ERW pipe to IS 1239 or IS 3589 suits water and utility lines. Last updated: 16 Nov 2026.

Bhilwara lineUsual pipeStandardWhy
Steam and condensate in process housesSeamlessASTM A106 Gr BNo weld seam under heat and pressure
Thermic fluid heatersSeamlessASTM A106 Gr BHigh temperature service
Process water and ETP linesERWIS 3589 / IS 1239Large bore, lower pressure
Compressed air in spinning millsERW medium/heavyIS 1239Small bore, threaded or welded
Machine frames and structuresHollow sectionsIS 4923 / IS 1161Structural use, not pressure

How to order seamless pipe for Bhilwara: 5 steps

  1. List size (NB), schedule and length for each line.
  2. Write the standard and grade, for example ASTM A106 Gr B, SCH 40.
  3. State service: steam, thermic fluid, water or air, with pressure and temperature.
  4. Ask for mill test certificates traced to heat numbers (EN 10204 3.1 when required).
  5. Send the line list to info@alloynex.com with fittings and flanges in the same review.
PointSeamless (ASTM A106)ERW (IS 1239 / IS 3589)
Weld seamNoneLongitudinal weld
Best forHigh pressure and temperatureWater, air, utility
Wall thicknessSchedules (SCH 40, 80)Light, medium, heavy classes or thickness
SizesSmall to medium boreSmall to large bore

FAQs

Which pipe is used for steam lines in Bhilwara textile units?

Seamless carbon steel pipe to ASTM A106 Grade B, usually SCH 40 or SCH 80, because it has no weld seam and is rated for high temperature service.

भीलवाड़ा में सीमलेस पाइप कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, भीलवाड़ा, मंडल और गुलाबपुरा के लिए सीमलेस और ERW पाइप, लाइन लिस्ट की तकनीकी समीक्षा के साथ सप्लाई करती है। ऑर्डर में स्टैंडर्ड (जैसे ASTM A106 या IS 1239 / IS 3589) लिखें। लिस्ट info@alloynex.com पर भेजें।

Quotable fact: ASTM A106 Grade B has a minimum tensile strength of 415 MPa and is made without a weld seam.