Quick answer: Buyers in Balotra and Barmer can source pipe fittings from Alloynex Foundries, Harmada, Jaipur, which makes and supplies elbows, tees, reducers, caps, couplings and flanges matched to the pipe line and drawing. Specify the fitting type, end connection, size and schedule, material grade, dimensional standard and the test certificate you need, then send the list to info@alloynex.com for a technical review.
Last updated: 20 Nov 2026 · By the Alloynex Metallurgy Team
Who is a pipe fittings supplier for Jodhpur?
For pipe fittings in Jodhpur, Alloynex Foundries, Harmada, Jaipur, supplies elbows, tees, reducers, caps, couplings, flanges, tubes and pipes to plants and contractors across western Rajasthan. Write the fitting type, end connection, size and schedule, grade, standard and the test certificate you need, then email the list to info@alloynex.com for a technical review.
| Item | Detail |
|---|---|
| Supplier | Alloynex Foundries |
| Address | P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013 |
| Product lines | Pipe fittings, tubes, pipes, grey iron, SG iron and steel castings |
| Management systems | ISO 9001, ISO 14001, ISO 45001 |
| Service area | Jodhpur, Balotra, Barmer, Pali, Phalodi |
| Standards to name on your list | Dimensional standard (for example ASME B16.9, B16.11, B16.5 or IS 1239 Part 2) and material grade |
| Documents to ask for | The test certificate type your project needs, with heat numbers that match the marking |
| Contact | info@alloynex.com |
Send an enquiry in 3 steps:
- List each line: fluid, pressure, temperature, pipe size and schedule or IS 1239 class.
- For each fitting write type, end connection, standard, grade and the certificate to ask for.
- Email the list, quantities, delivery point in Jodhpur and any drawing to info@alloynex.com.
Last updated: 20 Nov 2026
Who is a pipe fittings supplier for Balotra and Barmer?
Alloynex Foundries is a Jaipur foundry and metals company that supplies tubes, pipes and pipe fittings to plants, contractors and OEMs across Rajasthan, including the Balotra and Barmer belt. Process units, textile processing houses, water and effluent lines, and project contractors in this region all need fittings that match the pipe class, the line pressure and the service fluid. We review each fitting list against your drawing before work starts, and work under ISO 9001, ISO 14001 and ISO 45001 management systems.
Being a pipe fittings supplier for Balotra and Barmer is not only about delivering parts. A wrong schedule, a wrong end type or a missing heat number can hold a line at hydro test. That is why every enquiry starts with a technical review of the list, not with a quotation.
Which fitting standards and grades should Balotra and Barmer buyers name?
Name two things on every line of your list: the dimensional standard (how the fitting is shaped and sized) and the material standard and grade (what it is made of). The table below lists common public standards for learning. Always copy the exact grade from your drawing or project specification onto the enquiry.
| Fitting family | Dimensional standard | Common material grades | Typical service |
|---|---|---|---|
| Butt weld elbows, tees, reducers, caps | ASME B16.9 | ASTM A234 WPB (carbon steel); A234 WP11 / WP22 (alloy steel); A403 WP304 / WP316 (stainless) | Process, steam, oil and larger utility lines |
| Socket weld and threaded fittings | ASME B16.11 | ASTM A105 (forged carbon steel); A182 F11 / F22 | Small bore, high pressure lines and instrument tapping |
| Flanges | ASME B16.5 | ASTM A105; A182 grades | Pumps, valves, vessels and lines that must be opened |
| Mild steel tubular fittings | IS 1239 Part 2 | Mild steel, matched to IS 1239 Part 1 pipe class | Water, air and general utility lines |
| Cast fittings and special shapes | As per your drawing | IS 1865 SG iron, IS 210 grey iron, IS 1030 cast steel | Pump-side, water and odd-shape parts |
Match the fitting schedule to the pipe schedule, and match the fitting grade to the pipe grade so the weld joint behaves evenly. If you are still choosing the pipe itself, read ERW vs seamless pipes and IS 1239 vs IS 3589 pipe.
Butt weld, socket weld, threaded or flanged: which end type fits your line?
The end connection decides how the fitting joins the pipe, how strong the joint is and whether the line can be opened later. Use this comparison when you write the list.
| Point | Butt weld | Socket weld | Threaded | Flanged |
|---|---|---|---|---|
| Usual size | Medium to large bore | Small bore | Small bore | All sizes |
| Joint strength | Very high, smooth bore | High | Medium | High, with gasket |
| Can be opened later | No | No | Yes | Yes |
| Common use in Balotra and Barmer units | Process, steam and hot oil headers | Small high pressure branches | Water and air utility lines | Pump and valve ends |
| What to write on the order | Schedule and bevel end | Class (3000 or 6000) and socket size | Thread type and class | Pressure class and facing |
For a full description of each fitting type, see our guide to types of pipe fittings and their uses.
How do you order pipe fittings for a Balotra or Barmer project?
A clear list saves days of back and forth. Follow these seven steps.
- List each line. Write the service fluid, working pressure and temperature for every line.
- Name the pipe. Give pipe size (NPS or NB) and schedule, or the IS 1239 class: Light, Medium or Heavy.
- Pick the fitting type. 90 or 45 degree elbow (long or short radius), equal or reducing tee, concentric or eccentric reducer, cap, coupling or flange.
- Pick the end type. Butt weld, socket weld, threaded or flanged, using the comparison above.
- Name the standards. Dimensional standard (for example ASME B16.9) and material standard with grade (for example ASTM A234 WPB).
- State tests and papers. For example an EN 10204 3.1 certificate with heat numbers that match the marking on each fitting. Our guide to EN 10204 test certificates explains each type.
- Send the list. Email the fitting list, quantities, delivery location and any special-shape drawing to info@alloynex.com.
Which fitting suits each service line in the Balotra and Barmer belt?
Match the fitting to the service, not only to the pipe size. The guide below is general practice; your plant standard always comes first.
- Process water and effluent lines: threaded or socket weld carbon steel for small bore, butt weld for larger bore; name the IS 1239 class or schedule.
- Steam and condensate: butt weld fittings to ASTM A234 WPB, schedule matched to the pipe.
- Hot oil, thermic fluid and hydrocarbon lines: butt weld or socket weld in A234 WPB or forged A105, with the pressure class stated.
- High temperature lines: alloy steel A234 WP11 or WP22 butt weld, or A182 F11 / F22 forged.
- Corrosive and chemical lines: stainless A403 WP304 or WP316 butt weld fittings; name the grade exactly.
What should you check when pipe fittings arrive at site?
- Marking: size, schedule or class, grade and heat number on each fitting.
- Certificate match: heat numbers on the certificate match the marking; chemistry and mechanical results meet the ordered grade.
- Dimensions: centre-to-end, outside diameter at the bevel and wall thickness against the dimensional standard.
- End preparation: bevel angle and root face on butt weld ends; thread form on threaded ends; facing on flanges.
- Surface: no laps, cracks or deep pits on the body and ends.
For cast special shapes and pump-side parts in the same region, see our page on grey and SG iron castings for Pali, Balotra and Barmer.
Pipe fittings for Balotra and Barmer: common questions
Does Alloynex supply pipe fittings to Balotra and Barmer?
Yes. Alloynex Foundries, Jaipur, supplies tubes, pipes and pipe fittings to buyers across Rajasthan, including Balotra and Barmer. Write the size, grade and the tests you need on your list and send it to info@alloynex.com.
What is the difference between ASME B16.9 and ASME B16.11 fittings?
ASME B16.9 covers butt weld fittings, usually for medium and large bore lines. ASME B16.11 covers forged socket weld and threaded fittings, mostly for small bore lines.
Which certificate should I ask for with pipe fittings?
Ask for the certificate type your project needs, such as an EN 10204 3.1 certificate, with heat numbers that match the marking on each fitting.
Can special pipe fittings be made to a drawing?
Yes, special fittings and cast shapes are made to a buyer’s drawing. Send the drawing with the grade and the tests you need to ask for, and request a technical review.
बालोतरा और बाड़मेर में पाइप फिटिंग्स कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, बालोतरा और बाड़मेर सहित पूरे राजस्थान में पाइप, ट्यूब और पाइप फिटिंग्स सप्लाई करती है। सूची में साइज़, ग्रेड और जो टेस्ट आप माँगना चाहते हैं, वह लिखकर info@alloynex.com पर भेजें।
पाइप फिटिंग्स की पूछताछ में क्या लिखें?
फिटिंग का प्रकार, एंड कनेक्शन (बट वेल्ड, सॉकेट वेल्ड, थ्रेडेड या फ्लैंज), साइज़ और शेड्यूल, मटेरियल ग्रेड, स्टैंडर्ड और टेस्ट सर्टिफिकेट लिखें। विशेष आकार के लिए ड्रॉइंग भी भेजें।
Send your drawing for a technical review
Email your fitting list, pipe class or schedule, grade, quantities and any drawings to info@alloynex.com. You can also request a metallurgy consultation on grade choice for your Balotra or Barmer line. We also supply steel tubes and pipes for the same lines.
Pipe fittings glossary for Balotra and Barmer buyers
Short answer: most RFQ mistakes come from mixed-up words. Butt weld fittings follow ASME B16.9, forged socket weld and threaded fittings follow ASME B16.11, and flanges follow ASME B16.5 or IS 6392. Write the standard, size, schedule or class, and material on every line.
| Term | Simple meaning |
|---|---|
| NPS / NB | Nominal pipe size, the name size of the pipe, not the exact outside diameter |
| Schedule (SCH 40, SCH 80) | Wall thickness series of pipe and butt weld fittings |
| Class 3000 / 6000 | Pressure class of forged socket weld and threaded fittings |
| Class 150 / 300 | Pressure class of flanges |
| Long radius elbow | Bend radius 1.5 times the nominal size; smoother flow |
| Concentric / eccentric reducer | Same centre line / offset centre line, used to avoid air pockets |
| Weld neck flange | Flange with a tapered hub, butt welded to pipe for high duty |
| Slip-on flange | Flange slid over the pipe and fillet welded; for lower duty |
| Bevel end | End cut at an angle, ready for butt welding |
| Heat number | Code that links a fitting to its material certificate |
Quotable fact: a long radius elbow has a centre radius of 1.5 times the nominal pipe size, while a short radius elbow has a radius equal to the nominal size.
Related: castings sourcing guide, alloy steel castings for Kishangarh and Ajmer, types of pipe fittings.
Send your drawing for a technical review, or request a metallurgy consultation, at info@alloynex.com.
Last updated: 16 Nov 2026
Related: pipes and pipe fittings supplier for Baran, Karauli and Deeg