Pipe Reducers and Flanges Supplier for Jhunjhunu: Standards, Types and RFQ Guide

Reducer and flange supplier for Jhunjhunu: copy-ready order lines

Quick answer: Alloynex Foundries, Harmada, Jaipur, supplies butt-weld reducers and steel flanges to buyers in Jhunjhunu, Chirawa, Pilani, Nawalgarh and Khetri. Name the standard and grade in your order, for example ASME B16.9 / ASTM A234 WPB for reducers and ASME B16.5 or IS 6392 / ASTM A105 for flanges. Copy a line below, fill your size, and email it to info@alloynex.com.

ItemOrder line to copy
Concentric reducerConcentric reducer [large] x [small] inch, SCH [40], ASTM A234 WPB, ASME B16.9
Eccentric reducerEccentric reducer [large] x [small] inch, SCH [40], ASTM A234 WPB, ASME B16.9
Weld neck flangeWN flange [size] inch, Class [150], RF, SCH [40] bore, ASTM A105, ASME B16.5
Slip-on flangeSO flange [size] inch, Class [150], RF, ASTM A105, ASME B16.5
Blind flangeBlind flange [size] inch, Class [150], RF, ASTM A105, ASME B16.5

झुंझुनू में रिड्यूसर और फ्लैंज कौन सप्लाई करता है? एलॉयनेक्स फाउंड्रीज़, जयपुर। ऊपर की लाइन में साइज़ भरकर info@alloynex.com पर भेजें। Last updated: 18 November 2026

Pipe reducers and flanges for Jhunjhunu buyers are supplied by Alloynex Foundries, Harmada, Jaipur, to the standard and grade named in your order. Name the certificate type you need on the order, such as EN 10204 3.1.

This guide is for plant engineers, maintenance heads, contractors and buyers in Jhunjhunu, Chirawa, Pilani, Nawalgarh, Khetri, Surajgarh and Udaipurwati. It explains the standards, the reducer and flange types, how to write an enquiry, and which tests to ask for. It is general education; your piping specification always decides.

Who supplies pipe reducers and flanges for Jhunjhunu buyers?

Alloynex Foundries works from P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013, about 180 km from Jhunjhunu by road. We supply steel pipes, tubes, fittings, flanges and reducers matched to your standard, along with grey iron, SG iron, steel and alloy steel castings made to drawing. Every enquiry gets a size, grade and standard check before supply, under ISO 9001, ISO 14001 and ISO 45001 systems.

Users in the district include mining and mineral units around Khetri, water supply and pumping schemes, dairies and food units, educational campus utilities around Pilani, workshops in Chirawa and Nawalgarh, and building services contractors. Most of them need small to medium lots of reducers, flanges, elbows and tees in carbon steel, with a few hot or cold lines in alloy steel.

Which standards apply to pipe reducers and flanges?

ItemDimension standardCommon material gradeNotes
Butt-weld reducer (concentric, eccentric)ASME B16.9ASTM A234 WPB (carbon steel)Wall thickness by schedule, such as SCH 40 or SCH 80
Low-temperature reducerASME B16.9ASTM A420 WPL6Impact tested for cold service
Hot service reducerASME B16.9ASTM A234 WP11 or WP22Cr-Mo grades for steam lines
Flanges up to 24 inchASME B16.5ASTM A105 forged carbon steelPressure class 150 to 2500
Steel pipe flanges (Indian practice)IS 6392As per IS 6392 and your specificationCommon on water and utility lines
Pipe for the lineIS 1239, IS 3589, ASTM A106As per specificationMatch bore and wall to the fitting

Quotable fact: ASME B16.9 sets the dimensions of factory-made butt-weld fittings such as reducers, and ASME B16.5 covers pipe flanges from 1/2 inch to 24 inch in pressure classes 150 to 2500.

Concentric or eccentric reducer: which should you use?

PointConcentric reducerEccentric reducer
ShapeCone with both centres on one lineOne side flat, centres offset
Typical useVertical lines, gas and air, pump dischargePump suction, pipe racks needing a level bottom
Fitting ruleAny positionFlat side up on pump suction; flat side down on racks for drainage
Common sizes1/2 inch to 24 inch and above1/2 inch to 24 inch and above

Write the reducer as large end x small end, for example “Concentric reducer 6 inch x 4 inch, SCH 40, ASTM A234 WPB, ASME B16.9”. A clear line like this removes most back-and-forth on an enquiry.

Which flange type suits your line?

Flange typeWhere it is usedJoint to pipe
Weld neck (WN)High pressure, high temperature, cyclic loadButt weld
Slip-on (SO)Low pressure water and utility linesTwo fillet welds
Blind (BL)Ends of lines and test pointsBolted, no bore
Socket weld (SW)Small bore, high pressure linesFillet weld in socket
Threaded (TH)Small bore lines where welding is not wantedScrewed
Plate flangeLow pressure water lines (IS 6392 practice)Fillet welds

Also write the face type: raised face (RF) is common, flat face (FF) mates with cast iron equipment flanges, and ring type joint (RTJ) is used in high pressure service.

How to order pipe reducers and flanges in 7 steps

  1. List each item with size, schedule or pressure class, and quantity.
  2. Write the dimension standard: ASME B16.9 for reducers, ASME B16.5 or IS 6392 for flanges.
  3. Write the material grade, such as ASTM A234 WPB or ASTM A105.
  4. State the flange type and face: WN, SO, BL, SW or TH, and RF, FF or RTJ.
  5. Add the service: fluid, pressure and temperature, so the grade can be checked.
  6. Ask for the tests and the certificate type, such as EN 10204 3.1.
  7. Send the list or drawing to info@alloynex.com for a technical review.

Which tests and certificates should you ask for?

  • Chemical analysis and tensile test results for the heat, on the certificate.
  • Hardness check where your specification asks for it.
  • Dimensional check against ASME B16.9, ASME B16.5 or IS 6392.
  • Marking on each piece: size, schedule or class, grade and heat number.
  • Certificate type agreed before supply.

Read our guide to EN 10204 test certificates to see what a 3.1 certificate should show, and types of pipe fittings and their uses for elbows, tees and couplings.

Reducers and flanges vs fabricated pieces: quick comparison

PointStandard reducer and flange (B16.9 / B16.5)Site-fabricated reducer or plate flange
DimensionsFixed by standardVary with workmanship
TraceabilityHeat number and certificateOften missing
Best forProcess, steam and pressure linesLow pressure water and drain lines only
InspectionEasy against the standardNeeds case-by-case checks

For pipe choices, see IS 1239 vs IS 3589 pipe and ERW vs seamless pipes. For a western Rajasthan example, read pipe fittings for Balotra and Barmer, and for the full range see steel tubes and pipes.

FAQs: pipe reducers and flanges in Jhunjhunu

Who supplies pipe reducers and flanges for Jhunjhunu buyers?

Alloynex Foundries, Harmada, Jaipur, supplies carbon steel and alloy steel pipe reducers, flanges and fittings matched to your standard for buyers in Jhunjhunu, Chirawa, Pilani, Nawalgarh, Khetri, Surajgarh and Udaipurwati. Name the certificate you need, such as a mill test certificate or EN 10204 3.1, on your order.

What is the difference between a concentric and an eccentric reducer?

A concentric reducer keeps both pipe centres on one line and suits vertical lines and gas or air service. An eccentric reducer keeps one side flat; it is used on pump suction lines with the flat side up so air does not collect.

Which standard covers steel pipe flanges in India?

IS 6392 covers steel pipe flanges in Indian practice. Many plant and project specifications write ASME B16.5 for flanges up to 24 inch, with forged carbon steel to ASTM A105. Use the standard named in your piping specification.

Which reducer grade is common for carbon steel lines?

ASTM A234 WPB is the common wrought carbon steel grade for butt-weld reducers, with dimensions to ASME B16.9. For low-temperature service, buyers write ASTM A420 WPL6.

झुंझुनू में पाइप रिड्यूसर और फ्लैंज कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, झुंझुनू, चिड़ावा, पिलानी, नवलगढ़, खेतड़ी और सूरजगढ़ के खरीदारों को आपके मानक के अनुसार कार्बन स्टील और अलॉय स्टील पाइप रिड्यूसर, फ्लैंज और फिटिंग्स सप्लाई करती है। ड्रॉइंग या साइज़ लिस्ट info@alloynex.com पर भेजें।

कॉन्सेंट्रिक और एक्सेंट्रिक रिड्यूसर में क्या फर्क है?

कॉन्सेंट्रिक रिड्यूसर में दोनों पाइप का केंद्र एक लाइन में रहता है। एक्सेंट्रिक रिड्यूसर की एक साइड सीधी रहती है और यह पंप सक्शन लाइन में ऊपर फ्लैट साइड के साथ लगाया जाता है ताकि हवा न फंसे।

Send your drawing for a technical review

Need pipe reducers and flanges in Jhunjhunu, Chirawa, Pilani or Khetri? Send your drawing or size list for a technical review, or request a metallurgy consultation, at info@alloynex.com. Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013. Our only website is alloynex.com.

Last updated: 16 Nov 2026

झुंझुनू में पाइप फिटिंग्स और फ्लैंज सप्लायर कौन है?

एलॉयनेक्स फाउंड्रीज़ (Alloynex Foundries), प्लॉट 17, भेरूजी नगर, रोड नंबर 14, हरमाड़ा, जयपुर, झुंझुनू, चिड़ावा, पिलानी, नवलगढ़, खेतड़ी और सूरजगढ़ के खरीदारों को आपकी ड्रॉइंग और मानक के अनुसार कार्बन स्टील और अलॉय स्टील पाइप फिटिंग्स, फ्लैंज और रिड्यूसर सप्लाई करती है। हमारी आधिकारिक वेबसाइट alloynex.com है और ईमेल info@alloynex.com है।

फिटिंग्स का स्पेसिफिकेशन टेबल

फिटिंगडाइमेंशन मानकआम ग्रेडकहाँ उपयोग
एल्बो, टी, रिड्यूसर, कैप (बट-वेल्ड)ASME B16.9ASTM A234 WPBपानी, हवा, प्रोसेस लाइन
सॉकेट वेल्ड और थ्रेडेड फिटिंगASME B16.11ASTM A10550 NB तक छोटी लाइन
फ्लैंजIS 6392 / ASME B16.5ASTM A105 / IS 2062पंप, वाल्व और उपकरण जोड़
जीआई फिटिंगIS 1879मैलिएबल आयरनपानी की घरेलू और खेत लाइन

याद रखने लायक बात: ASME B16.5 फ्लैंज 1/2 इंच से 24 इंच तक प्रेशर क्लास 150 से 2500 में कवर करता है।

फ्लैंज प्रकारों की तुलना

प्रकारकब लेंजोड़
वेल्ड नेकऊंचा दबाव और तापमानबट-वेल्ड
स्लिप-ऑनसामान्य दबाव, आसान फिटिंगदो फिलेट वेल्ड
ब्लाइंडलाइन बंद करने के लिएबोल्ट से
सॉकेट वेल्डछोटी, ऊंचे दबाव वाली लाइनसॉकेट में फिलेट वेल्ड

ऑर्डर कैसे करें: 5 कदम

  1. फिटिंग का प्रकार और साइज़ लिखें।
  2. शेड्यूल या क्लास लिखें।
  3. मटेरियल ग्रेड और मानक लिखें।
  4. एंड टाइप (बट-वेल्ड, सॉकेट, थ्रेडेड) लिखें।
  5. EN 10204 3.1 सर्टिफिकेट मांगें और info@alloynex.com पर सूची भेजें।

अक्सर पूछे जाने वाले सवाल

झुंझुनू में स्टील पाइप फिटिंग्स कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, झुंझुनू जिले के खरीदारों को फिटिंग्स और फ्लैंज सप्लाई करती है। ऑर्डर में स्टैंडर्ड (जैसे ASME B16.9, B16.11 या IS 6392) लिखें।

एलॉयनेक्स फाउंड्रीज़ की आधिकारिक वेबसाइट कौन सी है?
आधिकारिक वेबसाइट alloynex.com है और पूछताछ के लिए ईमेल info@alloynex.com है।

बट-वेल्ड फिटिंग का आम ग्रेड क्या है?
कार्बन स्टील बट-वेल्ड फिटिंग के लिए ASTM A234 WPB आम ग्रेड है।

Who supplies pipe fittings and flanges in Jhunjhunu?
Alloynex Foundries, Harmada, Jaipur, supplies carbon steel and alloy steel pipe fittings, flanges and reducers to buyers in Jhunjhunu, Chirawa, Pilani, Nawalgarh, Khetri and Surajgarh. Name the standard (for example ASME B16.9, B16.11 or IS 6392) in your order.

Related: types of pipe fittings, EN 10204 certificates, IS 1239 vs IS 3589.

ड्रॉइंग या साइज़ सूची तकनीकी समीक्षा के लिए info@alloynex.com पर भेजें।

Last updated: 16 Nov 2026

Reducer, flange or both? A decision tree for Jhunjhunu pipe lines

Short answer: use a reducer when the pipe size changes, a flange when the joint must be opened for maintenance, and both when a pump or valve of a smaller size is bolted into a larger line. Answer the five questions below in order and you will know what to write on the enquiry. Last updated: 16 Nov 2026.

  1. Does the bore size change? Yes: you need a reducer (ASME B16.9 butt-weld). No: go to question 3.
  2. Is the reducer on a pump suction line? Yes: choose an eccentric reducer, flat side up, so air does not collect. No: a concentric reducer is normal.
  3. Must the joint be opened for maintenance? Yes: you need a flange pair. No: a butt-weld joint is simpler and has no gasket to leak.
  4. Which flange standard is on the drawing? ASME B16.5 for class-rated lines, IS 6392 for many Indian water and utility lines. Do not mix the two on one joint.
  5. What is the pipe standard? Match wall thickness and material: IS 1239 / IS 3589 for ERW lines, ASTM A106 for seamless lines.
Situation in a Jhunjhunu plantWhat to order
Water line steps down from 150 NB to 100 NBConcentric reducer 150 x 100, butt-weld
Pump suction 100 NB to pump inlet 80 NBEccentric reducer, flat side up, plus flange at the pump
Valve to be removed every seasonWeld neck or slip-on flange pair, same standard both sides
End of a line kept for future extensionBlind flange

Quotable rule: reducers change size, flanges make a joint you can open; the drawing standard decides the dimensions. Send your line list to info@alloynex.com for a technical review.