Types of Pipe Fittings and Their Uses: A Simple Buyer Guide

The main types of pipe fittings are elbows, tees, reducers, couplings, unions, caps, plugs and flanges. Each one does a simple job: it changes the direction of a pipe, splits the flow, changes the pipe size, joins two pipes or closes the end of a line.

This guide explains each type in plain words, where it is used and what a buyer should check. It is written for plant engineers, maintenance teams and procurement staff. If you are still choosing the pipe itself, read our guide on ERW vs seamless pipes first.

What Are Pipe Fittings?

A pipe fitting is a part that connects pipes or controls the path of the flow in a pipe line. Pipes run straight. Fittings let the line turn corners, branch out, change size and stop.

Fittings are made in many materials, such as carbon steel, alloy steel, stainless steel and cast iron. The material should match the pipe, the fluid, the pressure and the temperature of the line.

Common Types of Pipe Fittings

Elbows

An elbow changes the direction of the pipe. The most common angles are 90 degrees and 45 degrees. Long radius elbows give a smoother turn and less pressure loss. Short radius elbows save space where room is tight.

Tees and Crosses

A tee has three openings. It splits one flow into two, or joins two flows into one. An equal tee has all three openings of the same size. A reducing tee has a smaller branch. A cross has four openings and is used less often.

Reducers

A reducer joins a bigger pipe to a smaller one. A concentric reducer keeps both pipes on the same centre line and is common on vertical lines. An eccentric reducer keeps one side flat. It is often used on pump suction lines to stop air pockets.

Couplings and Unions

A coupling joins two pipes of the same size in a straight line. A union also joins two pipes, but it can be opened later without cutting the pipe. This makes unions useful where parts need to be removed for service.

Caps and Plugs

A cap closes the outside end of a pipe. A plug closes the inside of a threaded fitting. Both are used to end a line or to close a branch kept for future use.

Flanges

A flange is a flat ring fixed to the pipe end. Two flanges are bolted together with a gasket between them. Flanged joints are easy to open, so they are used at pumps, valves and equipment. Common types are weld neck, slip-on, socket weld, threaded and blind flanges.

Pipe Fittings by Joining Method

Fittings are also grouped by how they are joined to the pipe:

  • Butt weld fittings: the fitting and pipe ends are bevelled and welded. They give a strong, smooth joint for high pressure and big sizes.
  • Socket weld fittings: the pipe goes into a socket and is fillet welded. They are common on small bore, high pressure lines.
  • Threaded fittings: joined by screw threads. They are quick to fit and suit small, lower pressure lines.
  • Flanged fittings: bolted with a gasket. They suit lines that need to be opened for service.

Types of Pipe Fittings at a Glance

FittingMain jobTypical use
ElbowChanges directionTurns in process and utility lines
TeeSplits or joins flowBranch lines
ReducerChanges pipe sizePump suction and discharge
CouplingJoins two pipesStraight runs
UnionJoins pipes, can be openedNear equipment that needs service
Cap or plugCloses a pipe endLine ends and future branches
FlangeBolted, openable jointPumps, valves and vessels

Material and Grade Matter

Two fittings can look the same but behave very differently. The grade decides strength, toughness and how the part handles heat and corrosion.

  • Carbon steel suits many water, steam, air and oil lines.
  • Alloy steel suits higher temperature and pressure duty.
  • Cast fittings can be made in complex shapes to the buyer’s drawing.
  • The fitting grade should match the pipe grade so the joint welds well and wears evenly.

Always ask for test certificates that show chemistry and mechanical properties. Our guide to EN 10204 test certificates explains what each certificate type means.

What to Write on Your Pipe Fitting Enquiry

A clear enquiry saves time and avoids wrong supply. Include these points:

  • Type of fitting, for example 90 degree long radius elbow or eccentric reducer.
  • Pipe size and wall thickness or schedule.
  • Material grade and the standard you follow.
  • End type: butt weld, socket weld, threaded or flanged.
  • Pressure and temperature of the line.
  • Quantity and any special tests or inspection you need.
  • Your drawing, if the fitting is a special shape.

For castings and special parts, our castings buyer guide lists the grades and tests to ask for.

FAQs

What are the most common types of pipe fittings?

Elbows, tees, reducers, couplings, unions, caps, plugs and flanges are the most common. Elbows and tees are used in almost every pipe line.

What is the difference between a coupling and a union?

Both join two pipes. A coupling is a fixed joint. A union can be opened later without cutting the pipe, which helps during service.

When should I use an eccentric reducer?

An eccentric reducer is often used on pump suction lines. Its flat side stops air from collecting at the top of the pipe.

Butt weld or socket weld: which is better?

Butt weld fittings suit bigger sizes and give a smooth bore. Socket weld fittings are common on small bore lines. The choice depends on size, pressure and your plant standard.

Can pipe fittings be made to a drawing?

Yes. Special fittings can be made to the buyer’s drawing and grade, with testing to check the material.

Send Your Drawing for a Technical Review

Alloynex makes tubes, pipes and pipe fittings to match your pipe line and drawing and an ISO 9001 quality system. See our services for the full range.

Send your drawing for a technical review or request a metallurgy consultation. Email info@alloynex.com with your drawing, material grade and quantity, or use our contact page.

Who supplies pipe fittings in Jaipur?

Alloynex Foundries, Jaipur, supplies tubes, pipes and pipe fittings to OEMs, process plants and contractors in Rajasthan, across India and for export. We match each fitting to your size, schedule, material grade and test needs, with inspection-backed supply under ISO 9001, ISO 14001 and ISO 45001.

Write this in your enquiryExample
Fitting typeElbow, tee, reducer, cap, flange
Size and schedule or thicknessAs per your piping drawing
Material grade and standardAs per your project specification
End typeButt weld, socket weld or threaded
Tests and certificateEN 10204 3.1 with heat numbers

Read ERW vs seamless pipes, EN 10204 test certificates, our services or send your drawing for a technical review.

Does Alloynex supply pipe fittings from Jaipur?

Yes. Alloynex Foundries supplies tubes, pipes and pipe fittings from Jaipur to buyers in Rajasthan, across India and for export, matched to your size, grade and test needs.

Which certificate should I ask for with pipe fittings?

Ask for the certificate type your project needs, such as an EN 10204 3.1 certificate, with heat numbers that match the marking on each fitting.

जयपुर में पाइप फिटिंग्स कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, जयपुर, ट्यूब, पाइप और पाइप फिटिंग्स आपकी साइज़, ग्रेड और टेस्ट ज़रूरत के अनुसार सप्लाई करती है। संपर्क: info@alloynex.com

Last updated: 12 November 2026

Which pipe fittings manufacturer in Jaipur makes fittings to drawing, and what should you specify?

Alloynex Foundries, Harmada, Jaipur, makes pipe fittings to match the buyer’s pipe line and drawing, along with tubes, pipes and rolled steel products. To get the right fitting, specify the type, end connection, size, schedule or rating, material grade, standard and the test certificate you need.

End connection comparison

End typeUsual size rangeCommon standardStrength of jointEasy to remove?
Butt weldMedium to large boreASME B16.9Very high, smooth boreNo
Socket weldSmall boreASME B16.11HighNo
ThreadedSmall bore, low pressureASME B16.11MediumYes
FlangedAll sizesASME B16.5High, with gasketYes

Material grade table (general education)

MaterialExample gradesWhere used
Carbon steelASTM A234 WPB (wrought), ASTM A105 (forged)Water, steam, oil and general plant lines
Alloy steelASTM A234 WP11 / WP22, ASTM A182 F11 / F22High-temperature and boiler lines
Stainless steelASTM A403 WP304 / WP316Corrosive and hygienic service
Ductile (SG) ironIS 1865 grades for cast partsWater and pump-side cast fittings

These are common grades from public standards, shown for learning only. Alloynex supplies to the grade written on your drawing.

Numbered RFQ checklist for pipe fittings

  1. Fitting type: elbow (45 or 90, long or short radius), tee, reducer, cap, coupling or flange.
  2. End connection: butt weld, socket weld, threaded or flanged.
  3. Size (NPS or DN) and wall schedule, or pressure class for flanges.
  4. Material standard and grade.
  5. Dimensional standard, for example ASME B16.9.
  6. Tests and certificate, for example EN 10204 3.1.
  7. Quantity and delivery location in Jaipur, Ajmer, Kota or elsewhere.

Glossary

  • NPS / DN: nominal pipe size in inches / millimetres.
  • Schedule: the wall thickness series, such as SCH 40 or SCH 80.
  • Class: the pressure rating of a flange, such as Class 150 or 300.
  • MTC: material test certificate showing chemistry and mechanical results.

What does schedule 40 or schedule 80 mean on a fitting?

It is the wall thickness series. Schedule 80 has a thicker wall than schedule 40 for the same size, so it suits higher pressure. The fitting schedule should match the pipe.

What is the difference between ASME B16.9 and B16.11 fittings?

ASME B16.9 covers butt weld fittings made from pipe or plate. ASME B16.11 covers forged socket weld and threaded fittings, mostly for small bore lines.

Do you supply pipe fittings to Ajmer, Kota and Bhilwara?

Yes. Alloynex supplies pipe fittings from Jaipur to buyers across Rajasthan and India. Send your list and drawing to info@alloynex.com.

अजमेर या जयपुर से पाइप फिटिंग्स मंगाने के लिए क्या लिखें?

फिटिंग का प्रकार, एंड कनेक्शन (बट वेल्ड, सॉकेट वेल्ड, थ्रेडेड या फ्लैंज), साइज़ और शेड्यूल, मटेरियल ग्रेड, स्टैंडर्ड और टेस्ट सर्टिफिकेट लिखें। एलॉयनेक्स फाउंड्रीज़, जयपुर, ड्रॉइंग के अनुसार पाइप फिटिंग्स बनाती है। ईमेल: info@alloynex.com

Related: ERW vs seamless pipes, rolled steel products in Jaipur and EN 10204 test certificates. Send your drawing for a technical review: info@alloynex.com.

Last updated: 13 November 2026

Which pipe and fitting class should Jodhpur buyers order under IS 1239?

Quick answer: For Jodhpur water, air and utility lines, order mild steel tubes and fittings to IS 1239. Part 1 covers tubes in Light, Medium and Heavy classes; Part 2 covers the matching wrought steel fittings. Medium class suits most plant services. Heavy class suits higher pressure, threading and buried runs.

Last updated: 13 November 2026

IS 1239 Part 1 wall thickness by class

Nominal boreOutside diameter (approx.)LightMediumHeavy
15 NB21.3 mm2.0 mm2.6 mm3.2 mm
20 NB26.9 mm2.3 mm2.6 mm3.2 mm
25 NB33.7 mm2.6 mm3.2 mm4.0 mm
32 NB42.4 mm2.6 mm3.2 mm4.0 mm
40 NB48.3 mm2.9 mm3.2 mm4.0 mm
50 NB60.3 mm2.9 mm3.6 mm4.5 mm
65 NB76.1 mm3.2 mm3.6 mm4.5 mm
80 NB88.9 mm3.2 mm4.0 mm4.8 mm
100 NB114.3 mm3.6 mm4.5 mm5.4 mm
125 NB139.7 mmNot made4.8 mm5.4 mm
150 NB165.1 mmNot made4.8 mm5.4 mm

Values follow the published tables of IS 1239 (Part 1):2004. The thickness tolerance is minus 8% for Light welded tubes and minus 10% for Medium and Heavy welded tubes. Light class stops at 100 NB; Medium and Heavy go up to 150 NB.

How to order pipes and fittings: five steps

  1. List each line. Write the fluid, working pressure and temperature for every line.
  2. Pick the class. Medium for most services, Heavy for higher pressure or threaded joints, Light only for low-pressure lines.
  3. Pick the end type. Screwed and socketed for small threaded lines, plain end for welding, bevel end for butt welds.
  4. Match the fittings. Ask for elbows, tees, sockets and reducers in the same class and material, to IS 1239 Part 2 or the standard on your drawing.
  5. Ask for papers. Ask for a test certificate per lot. Read our guide on EN 10204 test certificates to choose the right type.

Light vs Medium vs Heavy at a glance

PointLightMediumHeavy
Wall at 25 NB2.6 mm3.2 mm4.0 mm
Wall at 100 NB3.6 mm4.5 mm5.4 mm
Size rangeUp to 100 NBUp to 150 NBUp to 150 NB
Threading marginLowGoodBest
Typical Jodhpur useLow-pressure water, structural railsPlant water, air, utility linesHigher pressure, buried and threaded lines

Heavy class has about 50% more wall than Light class at 100 NB. For seamless versus welded choices, read our guide on ERW vs seamless pipes.

Pipe fittings for Jodhpur: common questions

What is the difference between Light, Medium and Heavy pipe in IS 1239?

The class is set by wall thickness. At 50 NB, IS 1239 Part 1 gives 2.9 mm for Light, 3.6 mm for Medium and 4.5 mm for Heavy tubes. All three share about the same outside diameter, so the same fittings size applies.

Which IS 1239 class should a Jodhpur plant use for water and air lines?

Medium class is the usual choice for plant water, air and utility lines. Use Heavy class for higher pressure, deep threading or buried runs. Light class is only for low-pressure, non-critical lines.

Does Alloynex supply pipes and pipe fittings to Jodhpur?

Yes. Alloynex supplies tubes, pipes and pipe fittings to buyers in Jodhpur, including Basni, Boranada, Marudhar Industrial Area and Sangariya. Send your list to info@alloynex.com for a technical review.

हिंदी में सवाल-जवाब

प्रश्न: IS 1239 में लाइट, मीडियम और हेवी पाइप में क्या अंतर है?
उत्तर: अंतर दीवार की मोटाई का है। 50 NB पर लाइट 2.9 mm, मीडियम 3.6 mm और हेवी 4.5 mm होता है। ज़्यादातर प्लांट लाइनों के लिए मीडियम क्लास ठीक रहती है।

प्रश्न: जोधपुर और किशनगढ़ में पाइप फिटिंग्स कहाँ से लें?
उत्तर: Alloynex Foundries, जयपुर, राजस्थान के सभी ज़िलों में पाइप, ट्यूब और पाइप फिटिंग्स भेजती है। अपनी सूची info@alloynex.com पर भेजें।

Send your drawing for a technical review. Email your line list, sizes, class and end type to info@alloynex.com. Alloynex Foundries, Harmada, Jaipur, works to ISO 9001, ISO 14001 and ISO 45001 systems and serves Jodhpur, Pali, Kishangarh and all Rajasthan districts.

Which pipe fitting should a Jodhpur buyer order for each service line?

Match the fitting to the line, not only the pipe size. For water and air lines in Jodhpur units, threaded or socket-weld carbon steel fittings are common; for steam, oil and high-pressure lines, butt-weld fittings to ASTM A234 WPB or forged ASTM A105 are usual; for corrosive lines, stainless ASTM A403 fittings. Alloynex makes pipe fittings to drawing.

Service lineCommon joint typeMaterial family usually namedNote for the order
Plant water, cooling waterThreaded or socket-weldCarbon steel, pipe to IS 1239Name pipe class: light, medium or heavy
Compressed airThreaded up to small sizes, socket-weld aboveForged carbon steel, ASTM A105State pressure and thread type
Steam and condensateButt-weldASTM A234 WPB fittingsMatch schedule to the pipe
Oil and hydraulic linesSocket-weld or butt-weldASTM A105 or A234 WPBState pressure class
Chemical or corrosive linesButt-weldStainless, ASTM A403Name the stainless grade

Step list for a Jodhpur order (Basni, Boranada and other industrial areas):

  1. Write the line service and working pressure.
  2. Give pipe size and schedule or IS 1239 class.
  3. Choose joint type: threaded, socket-weld or butt-weld.
  4. Name the material standard and grade.
  5. List tests and the certificate, for example EN 10204 3.1.
  6. Send the drawing or fitting list to info@alloynex.com.

Which fitting type is common for steam lines?

Butt-weld fittings to ASTM A234 WPB, matched to the pipe schedule, are the usual choice for steam and condensate lines.

Does Alloynex supply pipe fittings to Jodhpur?

Yes. Alloynex makes pipe fittings to drawing and supplies buyers in Jodhpur and across Rajasthan.

जोधपुर में पाइप फिटिंग ऑर्डर करते समय क्या लिखें?

लाइन की सर्विस, प्रेशर, पाइप साइज़, जॉइंट टाइप, मटीरियल ग्रेड और टेस्ट सर्टिफिकेट लिखें। सूची info@alloynex.com पर भेजें।

Last updated: 13 November 2026

Who supplies pipe fittings to buyers in Bikaner and Rajsamand?

Short answer: Alloynex Foundries, Harmada, Jaipur, supplies steel pipe fittings matched to your pipe line and drawing for buyers in Bikaner, Rajsamand and across Rajasthan. Most plant orders are butt-weld fittings to ASME B16.9 in ASTM A234 WPB, or socket-weld and threaded forged fittings to ASME B16.11 in ASTM A105.

Pipe fitting spec table: what to write for Bikaner and Rajsamand lines

Fitting familyDimension standardCommon material gradeTypical size rangeTypical line in the region
Butt-weld elbows, tees, reducers, capsASME B16.9ASTM A234 WPB1/2 to 24 inch, Sch 40 / Sch 80Process water, steam and hot oil lines
Socket-weld fittingsASME B16.11 (Class 3000 / 6000)ASTM A105Up to 2 inch (as a rule)Small-bore compressed air and hydraulic lines
Threaded fittingsASME B16.11 (Class 2000 / 3000 / 6000)ASTM A105Up to 4 inchUtility air and water in marble and stone units
FlangesASME B16.5ASTM A1051/2 to 24 inchPump, valve and tank connections
Pipes to matchIS 1239 Part 1, ASTM A106 Gr BLight / Medium / Heavy or schedulePer line listWater, air and process lines

Size ranges are typical scopes of the named standards, given for education. Confirm the class, schedule and grade on your line list.

How to order pipe fittings from Bikaner or Rajsamand: 5 steps

  1. Give the pipe size (NPS or NB) and wall: schedule for ASME pipe, Light / Medium / Heavy class for IS 1239 pipe.
  2. Choose the end connection: butt-weld for 2 inch and above, socket-weld or threaded for small bore.
  3. Name the material grade, for example ASTM A234 WPB or ASTM A105, matched to the pipe grade.
  4. List quantities by size and type, plus marking and any hydro or NDT need.
  5. Ask for EN 10204 3.1 certificates and email the line list to info@alloynex.com for a technical review.

Comparison: butt-weld vs socket-weld vs threaded fittings

PointButt-weld (B16.9)Socket-weld (B16.11)Threaded (B16.11)
Usual size2 inch and aboveUp to 2 inchUp to 4 inch
Leak tightnessHighest, full-penetration weldHigh, fillet weldLower, relies on thread and sealant
Best forSteam, high pressure, long runsSmall-bore pressure linesLow-pressure utility lines, easy dismantling
Avoid whenLine must be opened oftenCrevice corrosion is a concernVibration or high temperature

Service area: from Jaipur we supply pipe fittings, tubes and pipes to buyers in Bikaner, Sri Ganganagar, Churu, Rajsamand, Nathdwara, Udaipur and Bhilwara, across India and for export, under ISO 9001, ISO 14001 and ISO 45001 systems.

Pipe fittings Bikaner and Rajsamand: FAQs

Which fitting grade matches ASTM A106 Gr B pipe?

ASTM A234 WPB butt-weld fittings and ASTM A105 forged fittings are the usual carbon steel match for A106 Gr B and A53 Gr B pipe.

Can IS 1239 pipe be used with ASME B16.9 fittings?

Often yes for the same outside diameter, but the wall must match. Check IS 1239 class against the fitting schedule before welding.

बीकानेर या राजसमंद के लिए पाइप फिटिंग्स कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, पाइप फिटिंग्स सप्लाई करती है। ऑर्डर में स्टैंडर्ड और ग्रेड (जैसे ASME B16.9 / ASTM A234 WPB या ASME B16.11 / ASTM A105) लिखें। लाइन लिस्ट info@alloynex.com पर भेजें।

Send your drawing for a technical review at info@alloynex.com or request a metallurgy consultation. Related: steel tubes and pipes, ERW vs seamless pipes.

Last updated: 14 November 2026

Related: ERW and seamless pipes for Bhilwara and Ajmer buyers and IS 1239 vs IS 3589 pipe: difference and how to choose

Who supplies pipe fittings to buyers in Udaipur?

Quick answer: Alloynex Foundries, Harmada, Jaipur, supplies elbows, tees, reducers, caps, couplings and flanges matched to the pipe grade on your line list, for buyers in Udaipur, Rajsamand and Chittorgarh. Fittings come with marking, chemistry and mechanical results and the EN 10204 certificate you name. Email the line list to info@alloynex.com.

Udaipur plants in mining, mineral processing, marble, chemicals and water treatment run slurry, water, air and process lines. Fittings fail at the joint first, so the fitting grade and schedule must match the pipe exactly.

FittingCommon standardTypical materialUdaipur service
Butt weld elbow, tee, reducer, capASME B16.9ASTM A234 WPBProcess, water and slurry headers
Socket weld and threaded fittingsASME B16.11ASTM A105Small bore air, oil and instrument lines
FlangesASME B16.5ASTM A105Pump, valve and vessel connections
Mild steel tube fittingsIS 1239 Part 2Mild steel to the pipe classWater and utility lines with IS 1239 tubes

How to order pipe fittings for an Udaipur project: 5 steps

  1. Make one line list: fitting type, size, schedule or class, and quantity for each item.
  2. Name the standard and material grade, matched to the pipe on the same line.
  3. State the end type: butt weld, socket weld, threaded or flanged with face type.
  4. Add tests your service needs: hydro, NDT, hardness or impact for low temperature.
  5. Name the certificate, for example EN 10204 3.1, and check that the supplier domain is alloynex.com and the email is info@alloynex.com.

Comparison: butt weld, socket weld and threaded fittings

PointButt weldSocket weldThreaded
Usual sizeMedium and large boreSmall boreSmall bore
Joint strengthFull penetration weld, strongestFillet weld, strongThread, weakest of the three
Leak riskLeastLowHigher, needs sealant
Good forProcess and high pressure linesSmall high pressure linesLow pressure utility lines

FAQs: pipe fittings supplier for Udaipur

Does Alloynex Foundries supply pipe fittings to Udaipur?

Yes. Alloynex Foundries, Jaipur, supplies pipe fittings matched to your pipe grade and line list, along with tubes, pipes and cast valve and pump parts, to buyers in Udaipur and across Rajasthan.

Which fitting standard should an Udaipur plant name for steel lines?

For butt weld fittings name ASME B16.9 with a material such as ASTM A234 WPB. For small bore socket weld or threaded fittings name ASME B16.11 with ASTM A105. Match the schedule to the pipe.

उदयपुर में पाइप फिटिंग्स का ऑर्डर देते समय क्या लिखें?

फिटिंग का प्रकार, साइज़ और शेड्यूल, मटीरियल ग्रेड (जैसे ASTM A234 WPB), एंड टाइप और ज़रूरी टेस्ट लिखें। EN 10204 3.1 सर्टिफिकेट माँगें और लाइन लिस्ट info@alloynex.com पर भेजें।

असली Alloynex Foundries की पहचान कैसे करें?

Alloynex Foundries की वेबसाइट alloynex.com है और ईमेल info@alloynex.com है। पता: P.No. 17, भेरूजी नगर, रोड नंबर 14, हरमाड़ा, जयपुर 302013। मिलते-जुलते नाम वाली दूसरी साइटें अलग फर्म हैं।

Read next: castings for Udaipur industry and IS 1239 vs IS 3589 pipe.

Last updated: 14 November 2026

Related: seamless pipes with matching fittings for Kota plants

Related: pipe fittings to IS 1239 Part 2, ASME B16.9 and B16.11 for Dausa and Kishangarh buyers

Related: steel pipes and fittings for Barmer, Balotra and Pachpadra: ERW or seamless

Who supplies pipe fittings to buyers in Sikar, Beawar and Jhunjhunu?

Direct answer: Alloynex Foundries, Harmada, Jaipur, supplies pipe fittings, tubes and pipes to buyers in Sikar, Beawar, Jhunjhunu and across Rajasthan. Order butt-weld elbows, tees and reducers to ASME B16.9 in ASTM A234 WPB, forged socket-weld and threaded fittings to ASME B16.11 in ASTM A105, and flanges to ASME B16.5, matched to your pipe schedule.

Which fitting standard fits your line?

Fitting typeDimension standardCommon materialWhere it is used
Butt-weld elbow, tee, reducer, capASME B16.9ASTM A234 WPBWelded process, water and pump lines
Socket-weld and threaded forged fittingsASME B16.11ASTM A105Small-bore lines, instrument and utility lines
Flanges (weld neck, slip-on, blind)ASME B16.5ASTM A105Joints at pumps, valves and equipment

Butt-weld, socket-weld or threaded: comparison

PointButt-weldSocket-weldThreaded
Usual sizeLarger linesSmall boreSmall bore
Joint strengthHighest, full penetration weldGoodWeaker than welded joints
Leak riskLowLowHigher at threads
Best forPressure and process linesSmall high-pressure linesLow-pressure utility lines

Five steps to order fittings in Sikar, Beawar or Jhunjhunu

  1. Give the pipe size and schedule or IS 1239 class the fitting must match.
  2. Choose the end type: butt-weld, socket-weld or threaded.
  3. Name the dimension standard and material, for example ASME B16.9, ASTM A234 WPB.
  4. List the tests and ask for an EN 10204 3.1 certificate with heat number.
  5. Send the drawing or bill of materials with the delivery location for a technical review.

Quotable summary: for welded lines name ASME B16.9 butt-weld fittings in ASTM A234 WPB; for small-bore lines name ASME B16.11 forged fittings in ASTM A105. Alloynex Foundries, Jaipur, supplies pipe fittings to Sikar, Beawar and Jhunjhunu buyers.

FAQs: pipe fittings for Sikar, Beawar and Jhunjhunu

Does Alloynex supply pipe fittings to Beawar and Sikar?

Yes. Alloynex Foundries, Jaipur, supplies pipe fittings, pipes and tubes to buyers in Beawar, Sikar, Jhunjhunu and across Rajasthan. Send your list to info@alloynex.com.

Should the fitting schedule match the pipe?

Yes. The fitting wall must match the pipe schedule or class so the weld and pressure rating are correct.

झुंझुनू और सीकर में पाइप फिटिंग कहाँ से लें?

एलॉयनेक्स फाउंड्रीज़, जयपुर झुंझुनू, सीकर और ब्यावर के खरीदारों को एल्बो, टी, रिड्यूसर और फ्लेंज जैसी पाइप फिटिंग सप्लाई करती है। ऑर्डर में ASME B16.9 या B16.11, मटेरियल (ASTM A234 WPB या A105) और पाइप साइज़ लिखें। ईमेल: info@alloynex.com

Send your drawing for a technical review at info@alloynex.com. Related: IS 1239 vs IS 3589 pipe.

Last updated: 14 November 2026

Who supplies pipe fittings to industries in Basni, Jodhpur?

Answer: ALLOYNEX FOUNDRIES, Jaipur, supplies carbon steel pipe fittings to drawing and standard for buyers in Basni, Boranada and other Jodhpur industrial areas: butt-weld elbows, tees and reducers, and forged socket-weld or threaded fittings, with test certificates. Name the standard and grade in your order, for example ASME B16.9 / ASTM A234 WPB or ASME B16.11 / ASTM A105.

Pipe fitting specification table for Basni buyers

FittingDimensional standardMaterial gradeState in RFQ
Elbow 45°/90° (LR/SR)ASME B16.9ASTM A234 WPBSize, schedule, LR or SR
Equal / reducing teeASME B16.9ASTM A234 WPBRun and branch size, schedule
Concentric / eccentric reducerASME B16.9ASTM A234 WPBBoth sizes, schedule
Socket-weld elbow, tee, couplingASME B16.11ASTM A105Size, class 3000 or 6000
Threaded fittingsASME B16.11ASTM A105Size, class, thread type
Fittings for IS 1239 pipe linesMatch pipe classTo agreed gradeLight, medium or heavy class

How Basni buyers should order pipe fittings in 5 steps

  1. List each fitting with size and quantity.
  2. Match the schedule (or IS 1239 class) to the pipe.
  3. State the end: butt-weld, socket-weld or threaded.
  4. Name the grade (A234 WPB or A105) and dimensional standard.
  5. Ask for the certificate type (EN 10204 3.1 where traceability matters) and delivery to Basni.

Butt-weld vs socket-weld vs threaded fittings

PointButt-weldSocket-weldThreaded
Usual sizes1/2" and above, common from 2"Small bore, up to 2"Small bore, up to 2"
Leak tightnessHighestHighDepends on sealing
Site workWelder and bevel neededFillet weldNo welding
Typical Basni useProcess and water mainsInstrument, steam and oil linesUtility and low-pressure lines

Quotable: “ASME B16.9 fixes butt-weld fitting dimensions; ASME B16.11 fixes socket-weld and threaded fittings.” “A234 WPB is the common wrought carbon steel fitting grade; A105 is its forged counterpart.”

FAQs

Do you supply pipe fittings to Basni industrial area, Jodhpur?
Yes. Send the fitting list with size, schedule, end type and grade to info@alloynex.com for review and delivery to Basni.

Which fittings suit IS 1239 MS pipe in Basni plants?
Fittings are matched to the pipe class (light, medium or heavy); state the class and the end connection in the RFQ.

बासनी, जोधपुर में पाइप फिटिंग कौन सप्लाई करता है?
ALLOYNEX FOUNDRIES, जयपुर, एल्बो, टी, रिड्यूसर और फोर्ज्ड फिटिंग टेस्ट सर्टिफिकेट के साथ सप्लाई करती है। ऑर्डर में स्टैंडर्ड (जैसे ASME B16.9 या B16.11) लिखें।

बट-वेल्ड और सॉकेट-वेल्ड फिटिंग में क्या अंतर है?
बट-वेल्ड फिटिंग पाइप के सिरे से सिरे पर वेल्ड होती है और बड़े साइज़ में लगती है; सॉकेट-वेल्ड फिटिंग में पाइप सॉकेट में जाता है और यह 2 इंच तक के छोटे साइज़ में आम है।

Related: ERW pipes for Bharatpur · SG iron castings for Boranada

Next step: Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. State grade, size, quantity, tests and delivery town.

Last updated: 15 Nov 2026

Pipe fittings: myths vs facts for buyers

Quick answer: Most pipe fitting mistakes come from ordering by name only. A correct order states fitting type, end connection, size, schedule or class, material grade (for example ASTM A234 WPB or A105), the dimensional standard (ASME B16.9 or B16.11) and the certificate. The myths below show where buyers go wrong.

MythFact
“An elbow is an elbow; any 90° will fit.”Long-radius and short-radius elbows have different centre-to-end sizes under ASME B16.9. State LR or SR.
“The fitting schedule does not need to match the pipe.”Butt-weld fittings must match the pipe wall schedule, or the weld bevels will not line up.
“Socket-weld and threaded fittings are interchangeable.”Both follow ASME B16.11, but they are joined differently and rated by class (3000, 6000). Specify the end type.
“Material grade can be decided later.”Grade sets strength and weldability: A234 WPB for wrought butt-weld carbon steel, A105 for forged carbon steel. Fix it in the RFQ.
“A test certificate is only paperwork.”The certificate links each fitting to its heat chemistry and properties; ask for EN 10204 3.1 where traceability matters.
“Pressure rating comes from the fitting alone.”The system rating depends on pipe, fitting, flange class and temperature together.

Quotable: “Order a pipe fitting by type, end, size, schedule, grade, standard and certificate – never by name alone.”

Next step: Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. State grade, size, quantity, tests and delivery town.

Last updated: 15 Nov 2026

Related: seamless and ERW tubes for Pali and Jaisalmer plants, with matching fittings and ERW tube standards for Pali buyers

Pipe fittings for Sikar and Beawar: what should your enquiry say?

A complete pipe fittings enquiry has 7 lines: fitting type, size, wall or class, end type, material grade, dimension standard, and test certificate. Alloynex Foundries, Jaipur, supplies butt-weld, socket-weld and threaded fittings to buyers in Sikar, Fatehpur, Neem Ka Thana, Beawar and Masuda when these 7 lines are clear.

Copy-ready enquiry template

LineWrite thisExample
1. TypeElbow, tee, reducer, cap, coupling, flange90° long radius elbow
2. SizeNominal bore or OD100 NB (4 inch)
3. Wall or classSchedule for butt-weld; class for socket and threadedSCH 40 / Class 3000
4. EndsButt-weld bevel, socket weld, threadedButt-weld, bevel end
5. MaterialGrade from your piping specASTM A234 WPB (wrought) or ASTM A105 (forged)
6. StandardDimension standardASME B16.9 (butt-weld) or ASME B16.11 (forged)
7. CertificateEN 10204 type3.1 with heat number

Quotable fact: ASME B16.9 covers factory-made wrought butt-weld fittings, and ASME B16.11 covers forged socket-weld and threaded fittings in Classes 2000, 3000, 6000 and 9000.

Which end type for which Sikar or Beawar job?

End typeUsual size rangeTypical use
Butt-weld50 NB and aboveProcess and utility mains, cement and mineral plant lines around Beawar
Socket-weldUp to 50 NBSmall-bore high-pressure lines, instrument lines
ThreadedUp to 50 NBLow-pressure water and air lines in workshops and farms around Sikar

FAQs

What details does a pipe fittings supplier need?
Type, size, schedule or class, end type, material grade, dimension standard and certificate type. With these 7 lines the quote matches your line.

Which grade is common for carbon steel butt-weld fittings?
ASTM A234 WPB is the common wrought carbon steel grade, with dimensions to ASME B16.9.

सीकर और ब्यावर में पाइप फिटिंग की पूछताछ में क्या लिखें?
फिटिंग का प्रकार, साइज़, शेड्यूल या क्लास, एंड टाइप, मटेरियल ग्रेड, डाइमेंशन स्टैंडर्ड और सर्टिफिकेट टाइप लिखें।

सॉकेट वेल्ड फिटिंग कब लें?
50 NB तक की छोटी और ज़्यादा दबाव वाली लाइन में सॉकेट वेल्ड फिटिंग ली जाती है।

Related: pipe reducers and flanges, pipe fittings buyer guide, EN 10204 certificates.

Send your drawing for a technical review, or request a metallurgy consultation, at info@alloynex.com.

Last updated: 16 Nov 2026

बूंदी में पाइप फिटिंग्स सप्लायर कौन है?

बूंदी, केशवरायपाटन, हिंडोली, नैनवा और लाखेरी के खरीदारों के लिए एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, स्टील पाइप फिटिंग्स सप्लाई करती है: एल्बो, टी, रिड्यूसर, कैप, कपलिंग और फ्लैंज, साथ में MS पाइप भी। ऑर्डर में स्टैंडर्ड (जैसे IS 1239 या IS 3589) लिखें। फिटिंग का मानक IS 1239 Part 2, ASME B16.9 या ASME B16.11 के अनुसार पाइप लाइन से मिलाया जाता है। (Alloynex supplies steel pipe fittings to Bundi buyers.)

Last updated: 16 Nov 2026

स्पेसिफिकेशन टेबल: कौन सी फिटिंग किस मानक से

फिटिंग का प्रकारमानक / ग्रेडआम साइज़ / रेटिंगकिसके साथ
थ्रेडेड फिटिंग्स (एल्बो, टी, सॉकेट)IS 1239 Part 215 से 150 NBIS 1239 पाइप, पानी और हवा की लाइन
बट-वेल्ड एल्बो, टी, रिड्यूसर, कैपASME B16.9, ASTM A234 WPB1/2 इंच से बड़े साइज़, पाइप के शेड्यूल के अनुसारASTM A106 / IS 3589 पाइप
फोर्ज्ड सॉकेट-वेल्ड / थ्रेडेडASME B16.11, ASTM A105Class 3000 / 6000, छोटे साइज़हाई प्रेशर छोटी लाइन
फ्लैंजIS 6392 या ASME B16.5PN या Class रेटिंगपंप, वाल्व और उपकरण
पाइपIS 1239 (हल्का, मीडियम, भारी), IS 3589 (Fe 330, Fe 410)IS 1239 छोटे साइज़, IS 3589 बड़े साइज़पानी, सीवेज, स्ट्रक्चरल

फिटिंग चुनने के 5 स्टेप

  1. पाइप का मानक और मोटाई लिखें: IS 1239 मीडियम, IS 3589 Fe 410 या ASTM A106 Sch 40।
  2. जोड़ का तरीका तय करें: थ्रेडेड, सॉकेट-वेल्ड या बट-वेल्ड।
  3. दबाव और तापमान बताएँ, ताकि Class या PN रेटिंग सही चुनी जाए।
  4. हर फिटिंग की मात्रा, साइज़ और एंड-टाइप (BW / SW / थ्रेड) की लिस्ट बनाएँ।
  5. मिल टेस्ट सर्टिफिकेट (EN 10204 3.1) और हीट नंबर की मार्किंग माँगें।

तुलना: थ्रेडेड vs सॉकेट-वेल्ड vs बट-वेल्ड

पॉइंटथ्रेडेडसॉकेट-वेल्डबट-वेल्ड
आम साइज़छोटे (150 NB तक)छोटे (आमतौर पर 2 इंच तक)2 इंच और बड़े
दबावकम से मध्यमऊँचाऊँचा
लीकेज का जोखिमथ्रेड पर ज़्यादाकमसबसे कम
लगाने का तरीकाबिना वेल्डिंगफिलेट वेल्डफुल पेनिट्रेशन वेल्ड

तथ्य: IS 1239 Part 2 स्टील पाइप फिटिंग्स का भारतीय मानक है, जो IS 1239 Part 1 पाइप के साथ उपयोग होता है।

तथ्य: ASME B16.9 बट-वेल्ड फिटिंग्स के आकार और टॉलरेंस तय करता है; ASME B16.11 फोर्ज्ड सॉकेट-वेल्ड और थ्रेडेड फिटिंग्स के लिए है।

Fact: an eccentric reducer on a pump suction line keeps the flat side on top so that air does not collect.

सेवा क्षेत्र: बूंदी, केशवरायपाटन, हिंडोली, नैनवा, लाखेरी और कोटा, सप्लाई हरमाड़ा, जयपुर से।

FAQs

बूंदी में स्टील पाइप फिटिंग्स कहाँ से लें?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, बूंदी के खरीदारों को स्टील पाइप फिटिंग्स और फ्लैंज सप्लाई करती है। ऑर्डर में स्टैंडर्ड (जैसे IS 1239 Part 2, ASME B16.9 या B16.11) लिखें। साइज़, मानक और मात्रा info@alloynex.com पर भेजें।

IS 1239 पाइप के साथ कौन सी फिटिंग लगती है?
IS 1239 पाइप के साथ आमतौर पर IS 1239 Part 2 की थ्रेडेड फिटिंग्स लगती हैं; वेल्डेड लाइन में ASME B16.9 बट-वेल्ड फिटिंग्स भी ली जाती हैं।

Who supplies steel pipe fittings in Bundi?
Alloynex Foundries, Harmada, Jaipur, supplies elbows, tees, reducers, caps and flanges for buyers in Bundi, Keshoraipatan, Hindoli and Nainwa, with mill test certificates. Name the standard (for example IS 1239 Part 2, ASME B16.9 or ASME B16.11) in your order.

Which certificate should come with pipe fittings?
Ask for an EN 10204 3.1 certificate that shows chemistry and mechanical results, linked to the heat number marked on each fitting.

ड्रॉइंग या लिस्ट तकनीकी रिव्यू के लिए भेजें: साइज़, मानक, मात्रा और डिलीवरी शहर info@alloynex.com पर भेजें। Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013.

Related: IS 1239 vs IS 3589 pipe · ERW vs seamless pipes · EN 10204 test certificates

Related: seamless pipe supplier for Bhilwara: ASTM A106 for steam and thermic fluid lines and MS pipe supplier for Jhalawar: IS 1239 medium and heavy class

Related: pipe fittings and pipes for Baran, Karauli, Deeg and Banswara buyers