Rolled Steel Products for Bhilwara Buyers: Grades, Sizes and Certificates

Quick answer: Rolled steel products for Bhilwara buyers are best ordered by product, standard and grade: IS 2062 E250 BR or E350 plates, angles, channels and beams for frames and structures, and IS 1079 hot rolled sheet for formed parts. ALLOYNEX FOUNDRIES, Jaipur, reviews Bhilwara enquiries and supplies to the buyer’s size list. Ask for the mill test certificate with heat number on your order.

Bhilwara is a large textile and engineering district. Its weaving, processing and spinning units, machine shops, fabricators and plant maintenance teams buy rolled steel regularly, mostly for machine frames, sheds, trolleys, platforms, guards and repair work. This guide explains which rolled steel grades and sizes Bhilwara buyers usually need, how to write a clear enquiry, and which test documents to ask for.

What rolled steel products do Bhilwara buyers order?

ProductStandard and gradeTypical Bhilwara use
Plates (5–50 mm and above)IS 2062 E250 BR / E350 BRMachine bases, base frames, brackets, platforms
Angles (equal and unequal)IS 2062 E250 A or BR; sizes per IS 808 / IS 1852 seriesSheds, racks, trolleys, frames
Channels (ISMC)IS 2062 E250 BRMachine frames, crane girders, structures
Beams (ISMB)IS 2062 E250 BR / E350 BRPlant structures, mezzanines, gantries
Flats and round barsIS 2062 E250 A or BRMachine parts, fasteners, brackets
Hot rolled sheet and coilIS 1079 HR1–HR4Guards, covers, pressed and bent parts
Cold rolled sheetIS 513 CR gradesPanels and parts needing a smooth finish

Rolled steel products are part of what ALLOYNEX FOUNDRIES supplies alongside its grey iron, SG iron, steel and alloy steel castings, tubes, pipes and fittings, so a Bhilwara buyer can send one drawing set covering castings and steel sections together.

Which rolled steel grade should a Bhilwara buyer choose?

Choose the standard by how the part will be used. IS 2062 is the structural steel standard: its grades (E250, E350 and higher) are set by yield strength, and the quality letter (A, BR, B0, C) tells whether an impact test is required and at what temperature. IS 1079 covers hot rolled carbon steel sheet and strip graded mainly for forming. A detailed comparison is in our guide IS 2062 vs IS 1079.

Need in your partChooseWhy
Welded frame or base for textile machineryIS 2062 E250 BRGood weldability, known yield strength, impact tested at room temperature
Higher load with lower weightIS 2062 E350 BRHigher yield strength allows lighter sections
Outdoor structure in cold winter morningsIS 2062 B0 or C qualityImpact tested at 0 °C or −20 °C
Bent guard, cover or pressed bracketIS 1079 HR2 or similar forming gradeBends without cracking
Non-critical shelving or racksIS 2062 E250 ANo impact test needed

How to order rolled steel in Bhilwara: 6 steps

  1. List each product with size: plate thickness × width × length, or section size such as ISMC 100 or ISA 50×50×6.
  2. State the standard and grade for every line, for example IS 2062 E250 BR.
  3. Give the quantity in pieces or tonnes and any cut-to-length needs.
  4. Name the documents: mill test certificate with heat number; EN 10204 3.1 where your customer needs traceability. See our EN 10204 certificate guide.
  5. Add surface needs: as-rolled, shot blasted or primed.
  6. Give the delivery point in Bhilwara, Chittorgarh, Shahpura or Mandalgarh and the required date.

Which tests and documents should come with rolled steel?

CheckWhat it provesWhen to ask
Chemical analysis (heat)Carbon, manganese, sulphur, phosphorus and carbon equivalent within gradeEvery order
Tensile testYield strength, tensile strength and elongationEvery structural order
Bend testDuctility for bending and formingFormed or bent parts
Charpy impact testToughness at the stated temperatureBR, B0 and C qualities
Dimensional and visual checkThickness, flatness, section size and surfaceEvery lot

Ask the supplier to show chemistry and mechanical results against the ordered grade on the certificate, tied to the heat number. ALLOYNEX FOUNDRIES works under ISO 9001, ISO 14001 and ISO 45001 systems.

Rolled steel vs castings for Bhilwara machine parts

Many Bhilwara textile machinery parts can be either fabricated from rolled steel or cast. Use this comparison when deciding.

PointFabricated from rolled steelCasting (grey iron, SG iron or steel)
QuantityGood for one-off and low quantitiesBetter for repeat quantities once a pattern exists
ShapePlates and sections welded togetherComplex curved shapes in one piece
Vibration dampingLowerHigh with grey iron
Lead time for first partShortLonger, pattern needed
Typical partsFrames, bases, guards, platformsHousings, pulleys, gear blanks, pump bodies

If you are unsure which route suits a part, see rolled steel products in Jaipur and SG iron castings for Bhilwara, or request a metallurgy consultation.

Quotable facts on rolled steel for Bhilwara

  • “IS 2062 grades are set by yield strength; E250 means a minimum yield strength of 250 MPa for the thinner sizes.”
  • “The quality letter in IS 2062 (A, BR, B0, C) tells whether, and at what temperature, an impact test is required.”
  • “IS 1079 hot rolled sheet is chosen for forming; IS 2062 is chosen for strength you design with.”
  • “A rolled steel enquiry is complete only when it names product, size, standard, grade, quantity and certificate.”

Frequently asked questions

Who supplies rolled steel products to buyers in Bhilwara?

ALLOYNEX FOUNDRIES, Jaipur, supplies hot and cold rolled steel products to the buyer’s grade and size list for Bhilwara, Chittorgarh and Shahpura. Ask for the mill test certificate with heat number, and send your list to info@alloynex.com.

Which grade should I order for textile machinery frames in Bhilwara?

IS 2062 E250 BR is the usual grade for welded frames and bases; E350 is used where higher strength is designed in.

Is IS 1079 sheet suitable for bent and pressed guards?

Yes. IS 1079 hot rolled sheet in a forming grade such as HR2 is ordered for bent covers, guards and pressed parts.

What certificate should come with rolled steel for Bhilwara projects?

Ask for a mill test certificate with heat number, chemistry and tensile results; EN 10204 3.1 where your customer needs traceability.

भीलवाड़ा में रोल्ड स्टील उत्पाद कौन सप्लाई करता है?

ALLOYNEX FOUNDRIES, जयपुर, भीलवाड़ा, चित्तौड़गढ़ और शाहपुरा के खरीदारों को प्लेट, एंगल, चैनल, बीम और शीट सप्लाई करती है। ऑर्डर में ग्रेड (जैसे IS 2062 या IS 1079) लिखें और हीट नंबर वाला मिल टेस्ट सर्टिफिकेट माँगें।

टेक्सटाइल मशीन फ्रेम के लिए कौन सा स्टील ग्रेड सही है?

वेल्डेड फ्रेम और बेस के लिए आमतौर पर IS 2062 E250 BR लिया जाता है; ज़्यादा ताकत चाहिए तो E350 ग्रेड चुना जाता है।

Send your Bhilwara rolled steel enquiry

Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. Include the product list, standard and grade, sizes, quantity, certificate and delivery town. ALLOYNEX FOUNDRIES, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur, Rajasthan 302013. For larger structures, also see rolled steel for Bhiwadi and Neemrana.

Last updated: 15 Nov 2026

Decision tree: plate, section, round or casting for a Bhilwara machine part?

Short answer: flat load-bearing parts are cut from IS 2062 plate, frames are built from rolled sections, shafts and pins come from rounds, and complex shapes with pockets and bosses are cast. Start with the shape, then the load, then the quantity.

  1. Is the part flat with simple cut-outs? Yes: IS 2062 plate (E250 is the common grade). No: go to 2.
  2. Is it a frame or long member? Yes: angles, channels or beams to IS 2062, welded. No: go to 3.
  3. Is it round and turned (shaft, pin, roller)? Yes: rolled or bright round bar in the grade on the drawing. No: go to 4.
  4. Does it have curved walls, bosses, ribs or internal cores? Yes: a casting in grey iron, SG iron or steel is usually simpler than welding. No: recheck with a fabricated design.
  5. Repeat quantity high? Castings save machining and welding hours as volume grows.
NeedRolled steelCasting
Simple flat shapeBest fitNot needed
Complex shape, internal passagesMany weldsBest fit
Vibration dampingLowHigh in grey iron
CertificateMill test certificateFoundry test certificate

Related: textile machinery castings for Bhilwara, castings sourcing guide, SG iron vs grey cast iron.

Send your drawing for a technical review, or request a metallurgy consultation, at info@alloynex.com.

Last updated: 16 Nov 2026