Grey and SG Iron Castings in Pali: Grades and Buyer Guide

Alloynex Foundries, Harmada, Jaipur, makes grey and SG iron castings for buyers in Pali to their own drawings and grades, for pump, valve, agricultural and machine parts. Order grey iron to IS 210 (for example FG 260) and SG iron to IS 1865 (for example SG 500/7), and ask for a test certificate with every heat.

This guide is for engineers and buyers in Pali, Sumerpur, Marwar Junction, Sojat and Jaitaran. It explains, in simple words, which iron to pick, which grade to write, which tests to ask for and how to send a clear enquiry.

Grey and SG iron castings in Pali: what do buyers order?

Pali has many textile processing units, small engineering workshops, pump and motor users and farm equipment makers. Their parts are often heavy, need machining and must run for years. Typical iron castings for these users are:

  • Pump casings, impellers, bearing housings and covers
  • Valve bodies, bonnets and glands
  • Machine bases, frames, pulleys and gear blanks
  • Agricultural machine parts such as gearbox housings and brackets
  • Spare parts for textile processing machines made to the old part or drawing

All of these can be made in grey iron or SG iron. The right choice depends on the load, shock and pressure the part must carry.

Grey iron or SG iron: which suits your part?

Grey iron has graphite in the form of flakes. It machines easily, damps vibration well and suits bases, housings and covers. SG iron (also called ductile or spheroidal graphite iron) has graphite in round nodules. It is much tougher, can bend before it breaks and suits parts under shock or pressure.

PointGrey iron (IS 210)SG iron (IS 1865)
Graphite shapeFlakesRound nodules
Common gradesFG 200, FG 260, FG 300SG 400/15, SG 450/10, SG 500/7, SG 600/3
Tensile strength (minimum)200 to 300 MPa by grade400 to 600 MPa by grade
ElongationVery low (brittle)3% to 15% by grade
Vibration dampingVery goodGood
MachiningVery easyEasy
Best forBases, housings, covers, pulleysValve bodies, pump parts under load, brackets, gears
Read moreIS 210 FG 200 vs FG 260 vs FG 300IS 1865 SG iron grades

In short: pick grey iron when the part mainly sits still and must absorb vibration; pick SG iron when it must take shock, bending or pressure. Our full guide on SG iron vs grey cast iron explains more.

Which IS 210 and IS 1865 grade should you write?

The grade name tells you the strength. In IS 210, FG 260 means a minimum tensile strength of 260 MPa. In IS 1865, SG 500/7 means a minimum tensile strength of 500 MPa and a minimum elongation of 7%.

  • FG 200: covers, light housings and parts with low load.
  • FG 260: the common choice for machine bases, pump casings and bearing housings.
  • FG 300: housings and gear blanks that need more strength.
  • SG 400/15 and SG 450/10: parts that need high toughness and some bending, such as valve bodies.
  • SG 500/7: a good all-round grade for pump parts, brackets and machine parts.
  • SG 600/3: parts that need higher strength and wear resistance, such as some gears.

Always write the full standard and grade on the drawing, for example “IS 1865 SG 500/7”. Writing only “CI casting” or “SG casting” leaves the grade open.

Which tests and certificates should Pali buyers ask for?

Ask for tests that prove the grade on your drawing. Common checks for grey and SG iron castings are:

  • Chemical analysis of each heat
  • Tensile test on a separately cast test bar, and elongation for SG iron
  • Hardness test where the drawing needs it
  • Nodularity and microstructure check for SG iron
  • Hydrostatic or pressure test for pump and valve bodies
  • Dimensional report on the first casting against the drawing

Ask for an EN 10204 3.1 test certificate that shows the heat number. Our guide to EN 10204 test certificates explains 2.1, 2.2, 3.1 and 3.2.

How to send an RFQ from Pali in six steps

  1. Send the drawing (PDF or CAD) or a clear sketch of the old part with key sizes.
  2. Write the standard and grade, for example IS 210 FG 260 or IS 1865 SG 500/7.
  3. Mark machined faces and critical areas, and give the casting tolerance if you have one.
  4. List the tests and the certificate you need.
  5. Give the weight per piece if known, the order quantity and the yearly quantity.
  6. Give the delivery location (Pali, Sumerpur, Marwar Junction or nearby) and email it all to info@alloynex.com.

A clear enquiry gets a clear technical answer. Every order starts with a drawing review of grade, tolerances and machining allowance.

Why work with a Jaipur foundry for Pali parts?

Alloynex Foundries is in Harmada, Jaipur, and supplies buyers across Rajasthan, India and export markets. We make grey iron, SG iron, steel and alloy steel castings to drawing, and also supply rolled steel products, tubes, pipes and fittings. Work is done under ISO 9001, ISO 14001 and ISO 45001 systems.

For steel parts in the same area, read steel castings for Pali and Jalore buyers.

FAQs

Does Alloynex supply grey and SG iron castings to Pali?

Yes. Alloynex Foundries, Jaipur, makes grey iron and SG iron castings to drawing for buyers in Pali, Sumerpur, Marwar Junction and nearby towns. Send your drawing, grade and quantity to info@alloynex.com.

Which grey iron grade is common for machine parts?

IS 210 FG 260 is a common choice for machine bases, housings and pump parts. FG 200 suits lightly loaded parts, and FG 300 suits parts that need more strength.

When should I choose SG iron instead of grey iron?

Choose SG iron when the part takes shock, bending or pressure, for example valve bodies, brackets and pump parts under load. IS 1865 SG 500/7 is a common all-round grade.

पाली में ग्रे आयरन और एसजी आयरन कास्टिंग कौन बनाता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर पाली, सुमेरपुर और मारवाड़ जंक्शन के खरीदारों के लिए ड्रॉइंग के अनुसार ग्रे आयरन और एसजी आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 210 या IS 1865 ग्रेड लिखें। ड्रॉइंग info@alloynex.com पर भेजें।

एसजी आयरन और ग्रे आयरन में क्या फर्क है?

ग्रे आयरन में ग्रेफाइट पत्तियों जैसा होता है, इसलिए यह कंपन सोखता है और मशीनिंग आसान है। एसजी आयरन में ग्रेफाइट गोल गांठों जैसा होता है, इसलिए यह ज़्यादा मज़बूत और कम भंगुर होता है।

Send your drawing for a technical review

Need grey iron or SG iron castings in Pali? Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013, Rajasthan.

Last updated: 14 November 2026

Who supplies grey iron castings in Balotra and Barmer?

Short answer: Alloynex Foundries, Harmada, Jaipur, makes grey iron castings to drawing for buyers in Balotra, Barmer, Pachpadra and Jasol. Most parts are ordered in IS 210 FG 200 for covers and bases or FG 260 for pump bodies, pulleys and housings. Ask for chemistry, tensile strength and hardness results for each heat.

Balotra has many textile dyeing and processing units and effluent treatment plants. Barmer has oil and gas, lignite mining, power and farm users. They need pump bodies, impellers, pulleys, gearbox covers, machine bases and valve parts that last.

IS 210 grey iron grade table for Balotra and Barmer parts

IS 210 gradeMin. tensile strength (MPa)Typical hardness (BHN, approx.)Typical Balotra and Barmer parts
FG 150150130 to 180Counterweights, covers, non-load parts
FG 200200160 to 220Machine bases, light housings, guards
FG 220220180 to 220Gearbox covers, general housings
FG 260260180 to 230Pump bodies, impellers, pulleys, valve parts
FG 300300180 to 250Heavy housings, rollers, machine tool parts
FG 350350207 to 270High-strength wear parts
Tensile values are minimums on separately cast 30 mm test bars as per IS 210. Hardness ranges are typical guidance only.

How to choose and order grey iron castings from Balotra or Barmer

  1. Check the load: if the part only sits, carries steady load or must damp vibration, grey iron fits.
  2. Pick the grade: FG 200 for covers and bases, FG 260 for pump and pulley parts, FG 300 for heavier duty.
  3. Write the grade on the drawing, for example “IS 210 FG 260”.
  4. Mark the thinnest and heaviest walls and the machined faces.
  5. Ask for chemistry, tensile test bar, hardness and a dimensional report.
  6. Ask for stress relieving if the part must stay stable during machining.
  7. Email the drawing to info@alloynex.com for a technical review.

FG 200 vs FG 260 vs SG 400/15 for pump and textile machine parts

PointGrey iron FG 200Grey iron FG 260SG iron SG 400/15 (IS 1865)
Min. tensile (MPa)200260400
ElongationVery lowVery low15% minimum
Vibration dampingVery goodVery goodMedium
Shock and water hammerPoorPoorGood
MachiningEasiestEasyEasy
Typical useBases, guards, coversPump bodies, pulleys, impellersValve bodies and brackets under shock

Quick facts for Balotra and Barmer buyers

  • IS 210 is the Indian standard for grey iron castings; the FG number is the minimum tensile strength in MPa.
  • Thick sections of a grey iron casting show lower strength than the test bar, so mark wall thickness on the drawing.
  • Grey iron damps vibration better than SG iron or steel, which suits machine bases.
  • Alloynex Foundries, Harmada, Jaipur, supplies Balotra, Barmer, Pachpadra and Jasol and works under ISO 9001, ISO 14001 and ISO 45001 systems.

बालोतरा और बाड़मेर के खरीदारों के लिए जानकारी (Hindi)

बालोतरा की टेक्सटाइल प्रोसेसिंग यूनिट्स और बाड़मेर के तेल, खनन और कृषि उपयोगकर्ता पंप बॉडी, इम्पेलर, पुली, गियरबॉक्स कवर और मशीन बेस के लिए ग्रे आयरन कास्टिंग खरीदते हैं। ड्रॉइंग पर मानक और ग्रेड, जैसे “IS 210 FG 260”, ज़रूर लिखें और केमिस्ट्री, टेन्साइल और हार्डनेस टेस्ट के साथ EN 10204 3.1 सर्टिफिकेट मांगें।

FAQs: grey iron castings in Balotra and Barmer

Who supplies grey iron castings in Balotra and Barmer?

Alloynex Foundries, Harmada, Jaipur, makes grey iron castings to the buyer’s drawing for buyers in Balotra, Barmer, Pachpadra and Jasol. Name the IS 210 grade (for example FG 200, FG 260 or FG 300) and ask for chemistry, tensile and hardness results and the certificate type you need.

Which grey iron grade suits pump bodies in Balotra textile units?

IS 210 FG 260 is a common choice for pump bodies, impellers and valve parts on process and effluent water lines. Choose SG 400/15 to IS 1865 if the part takes shock or water hammer.

Can grey iron castings be used for Barmer oil field and mining spares?

Grey iron suits covers, bases, housings and pulleys that sit still and must damp vibration. Parts under pressure, shock or bending are better in SG iron or cast steel. Send the drawing for a technical review.

बालोतरा और बाड़मेर में ग्रे आयरन कास्टिंग कौन बनाता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, बालोतरा, बाड़मेर, पचपदरा और जसोल के खरीदारों के लिए ड्रॉइंग के अनुसार ग्रे आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 210 ग्रेड (जैसे FG 200, FG 260 या FG 300) लिखें। ड्रॉइंग, ग्रेड और मात्रा info@alloynex.com पर भेजें।

ग्रे आयरन का कौन सा ग्रेड पंप बॉडी के लिए सही है?

पंप बॉडी, इम्पेलर और वाल्व पार्ट के लिए IS 210 FG 260 आम पसंद है। अगर पार्ट पर झटका या वॉटर हैमर आता है तो IS 1865 SG 400/15 एसजी आयरन बेहतर है।

Related: IS 210 FG 200 vs FG 260 vs FG 300, SG iron vs grey cast iron, steel castings for Sirohi and Abu Road.

Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com.

Last updated: 15 November 2026

Related district guides: pipe fittings supplier for Balotra and Barmer, grey iron castings for Deeg pump and valve parts, ERW pipe supplier for Bundi (IS 1239 classes) and SG iron pump castings for Phalodi.

Related: SG iron castings for Beawar: which IS 1865 grade to order and steel castings for stone crusher parts in Rajsamand.

Who makes alloy steel pressure parts castings for Pali buyers?

Direct answer: Alloynex Foundries, Harmada, Jaipur, makes carbon steel and alloy steel pressure parts castings to drawing for buyers in Pali, Sojat, Marwar Junction, Sumerpur and Falna. Common grades are ASTM A216 WCB for valve and pump bodies, and ASTM A217 WC6 or WC9 for hot service. Ask for test results against the grade, linked to the heat number on the certificate.

Pali sits about 300 km from Jaipur by road, so drawings, first-off samples and lot dispatch follow one review chain. This section is general education on grades and tests; your design code and drawing always decide.

Pressure parts casting grades: spec table

Grade (standard)TypeTypical serviceUsual heat treatment
ASTM A216 WCBCarbon steelValve and pump bodies, bonnets, covers for water, oil and steam up to about 425 °CNormalised, or normalised and tempered
ASTM A216 WCCCarbon-manganese steelSame family as WCB where higher strength is writtenNormalised, or normalised and tempered
ASTM A217 WC61.25Cr-0.5Mo alloy steelHot steam and thermal oil serviceNormalised and tempered
ASTM A217 WC92.25Cr-1Mo alloy steelHigher temperature steam serviceNormalised and tempered
ASTM A352 LCBCarbon steel, impact testedLow-temperature serviceQuenched and tempered or normalised and tempered
IS 1030 280-520WCarbon steel, weldableGeneral engineering parts, not a pressure-code grade by itselfNormalised or annealed

Quotable fact: WCB, WC6 and WC9 belong to ASTM A216 and A217, the steel casting standards most valve makers write for pressure-retaining bodies.

How to select a pressure parts casting grade in 5 steps

  1. Write the design pressure, design temperature and fluid on the enquiry.
  2. Check the grade your product standard or design code allows (for example the valve standard you build to).
  3. Pick carbon steel (WCB) for normal temperatures, Cr-Mo steel (WC6, WC9) for hot service, or LCB for cold service.
  4. List the tests: chemistry, tensile, hardness, pressure test, and any radiography or ultrasonic test the code asks for.
  5. Agree the certificate type, usually EN 10204 3.1, before the pattern is made.

Carbon steel vs Cr-Mo alloy steel vs SG iron for pressure parts

PointCarbon steel (WCB)Cr-Mo steel (WC6/WC9)SG iron (IS 1865 SG 400/15)
Main useGeneral valve and pump bodiesHot steam and thermal oilWater and low-pressure service
Strength at high temperatureModerateHigherLower
Weld repairYes, with approved procedureYes, with pre-heat and post-weld heat treatmentLimited
Typical certificateEN 10204 3.1EN 10204 3.1EN 10204 3.1

Pali buyers: textile process houses, dye and bleach units, boiler and thermal fluid users, and pump repair shops often need WCB or WC6 bodies and covers. Send the old part drawing or a sketch with key sizes so the grade and machining allowance can be reviewed.

FAQs: pressure parts castings for Pali

Who makes alloy steel pressure parts castings for Pali buyers?

Alloynex Foundries, Harmada, Jaipur, makes carbon steel and alloy steel castings to drawing for valve, pump and process plant users in Pali, Sojat, Marwar Junction, Sumerpur and Falna. Every order starts with a drawing and grade review. Ask for test results linked to the heat number.

Which grade is common for pressure parts castings?

ASTM A216 WCB is the common carbon steel grade for valve and pump bodies up to about 425 °C. ASTM A217 WC6 (1.25Cr-0.5Mo) and WC9 (2.25Cr-1Mo) keep strength at higher temperatures. ASTM A352 LCB is used for low-temperature service. The design code decides the final grade.

What tests should a pressure part casting have?

Ask for chemical analysis and tensile test from the same heat, hardness after heat treatment, visual and dimensional checks, and the pressure test set by your valve or pump standard. Volumetric tests such as radiography apply only where the code or drawing asks for them.

Can IS 1030 grades be used for pressure parts?

IS 1030 grades such as 280-520W are general engineering steel castings. For pressure-retaining parts most buyers write an ASTM A216 or A217 grade, or the grade named in their product standard.

पाली में प्रेशर पार्ट्स के लिए अलॉय स्टील कास्टिंग कौन बनाता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, पाली, सोजत, मारवाड़ जंक्शन, सुमेरपुर और फालना के खरीदारों के लिए ड्रॉइंग के अनुसार कार्बन स्टील और अलॉय स्टील कास्टिंग बनाती है। हर ऑर्डर ड्रॉइंग और ग्रेड रिव्यू से शुरू होता है।

प्रेशर पार्ट कास्टिंग के लिए कौन सा ग्रेड आम है?

वाल्व और पंप बॉडी के लिए ASTM A216 WCB आम कार्बन स्टील ग्रेड है। ऊंचे तापमान के लिए ASTM A217 WC6 या WC9 लिखा जाता है। अंतिम ग्रेड आपका डिज़ाइन कोड तय करता है।

Related guides: valve body castings and tests, steel vs alloy steel castings, EN 10204 test certificates and tubes for Pali and Jaisalmer.

Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013, works under ISO 9001, ISO 14001 and ISO 45001 systems.

Last updated: 16 Nov 2026

Who supplies flywheel castings to Alwar buyers, and which grade should a flywheel be?

Short answer: Alloynex Foundries, Harmada, Jaipur, makes grey iron and SG iron flywheel castings to drawing for buyers in Alwar, MIA, Bhiwadi, Behror and Neemrana. Most engine, pump-set and farm machine flywheels are IS 210 FG 260 grey iron. Choose IS 1865 SG 500/7 when the flywheel runs at higher rim speed or takes shock. Last updated: 16 Nov 2026

Flywheel casting spec table

Flywheel useUsual gradeMin. tensile (MPa)Key checks
Diesel engine and pump-set flywheelsIS 210 FG 260260Chemistry, tensile bar, hardness, balance after machining
Thresher, chaff cutter and farm machine flywheelsIS 210 FG 200 or FG 260200 / 260Hardness, rim and bore dimensions
Press and punching machine flywheelsIS 210 FG 260 or FG 300260 / 300Section soundness at rim, hardness
Higher-speed or shock-loaded flywheelsIS 1865 SG 500/7500Nodularity, tensile, elongation
General guidance; the grade on your drawing decides.

How to order a flywheel casting in 6 steps

  1. Send the drawing with rim diameter, face width, bore and keyway, and the grade.
  2. State the maximum running speed (rpm) so the grade and rim section can be checked.
  3. Mark machined faces and machining stock (ISO 8062 tolerance grade if you use it).
  4. Ask for static or dynamic balancing if the flywheel is supplied machined.
  5. List tests: chemistry per heat, tensile bar, hardness on rim and hub.
  6. Ask for an EN 10204 3.1 certificate linked by heat number.

Grey iron vs SG iron flywheels

PointGrey iron (IS 210)SG iron (IS 1865)
Damping and machiningVery goodGood
Shock resistanceLowHigh
Safe rim speedLowerHigher
Typical usePump-sets, farm machines, general enginesHigher-speed, impact or safety-critical flywheels

FAQs: flywheel castings Alwar

Which grey iron grade is used for flywheels? FG 260 to IS 210 is the usual choice; FG 200 suits slow, light farm machine flywheels.

Do you supply flywheels machined and balanced? Castings are made to drawing with heat treatment as the part needs; write balancing needs on the drawing for review.

अलवर में फ्लाईव्हील कास्टिंग कौन बनाता है? एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार ग्रे आयरन और SG आयरन फ्लाईव्हील कास्टिंग बनाती है। ड्रॉइंग पर ग्रेड (जैसे FG 260) लिखें।

फ्लाईव्हील के लिए ग्रे आयरन या SG आयरन? सामान्य पंप-सेट और खेती की मशीन के लिए FG 260 ग्रे आयरन, तेज़ गति या झटके वाले काम के लिए SG 500/7।

Service area: Alwar city, MIA, Bhiwadi, Tapukara, Khairthal, Behror and Neemrana, served from Harmada, Jaipur. Read IS 210 FG 200 vs FG 260 vs FG 300. Send your drawing for a technical review to info@alloynex.com, or request a metallurgy consultation on the grade.