Ductile iron castings for Jhalawar and Baran buyers are made to drawing by Alloynex Foundries, Harmada, Jaipur, in IS 1865 grades such as SG 400/15 and SG 500/7. Order by grade, not by name, and ask for chemistry, tensile, elongation, hardness and nodularity results with each lot.
Choosing between SG iron grades? See our guide SG 400/15 vs SG 500/7 vs SG 600/3.
This guide is for design engineers, maintenance heads and buyers in Jhalawar, Jhalrapatan, Bhawani Mandi, Baran, Chhabra and Anta. It explains which ductile iron grade fits which part, how ductile iron compares with grey iron and cast steel, which tests prove the grade, and what to send with your enquiry. The words are kept simple.
बारां में एसजी आयरन (डक्टाइल) कास्टिंग कहाँ से लें?
सीधा जवाब: बारां, अंता और छबड़ा की इकाइयाँ एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर को अपनी ड्रॉइंग भेजकर SG आयरन कास्टिंग बनवा सकती हैं। पंप बॉडी, गियरबॉक्स हाउसिंग, ब्रैकेट और व्हील हब के लिए आमतौर पर IS 1865 का SG 500/7 या SG 400/15 ग्रेड लिया जाता है। हर हीट की केमिस्ट्री, टेंसाइल और हार्डनेस रिपोर्ट माँगें।
| पार्ट | आम ग्रेड | स्टैंडर्ड | मुख्य जाँच |
|---|---|---|---|
| पंप बॉडी, वाल्व बॉडी | SG 400/15 | IS 1865 | प्रेशर टेस्ट, टेंसाइल |
| गियरबॉक्स हाउसिंग, ब्रैकेट | SG 500/7 | IS 1865 | टेंसाइल, हार्डनेस |
| व्हील हब, एक्सल पार्ट | SG 600/3 | IS 1865 | हार्डनेस, नोड्यूलैरिटी |
| कवर, बेस प्लेट | ग्रे आयरन FG 260 | IS 210 | हार्डनेस, डाइमेंशन |
- ड्रॉइंग, ग्रेड, प्रति पीस वज़न और सालाना मात्रा भेजें।
- ड्यूटी के अनुसार SG ग्रेड तय करें: झटका हो तो 400/15, ताकत चाहिए तो 500/7।
- पैटर्न बनने से पहले टेस्ट और EN 10204 3.1 सर्टिफिकेट तय करें।
बारां में SG आयरन और ग्रे आयरन में क्या फर्क है?
SG आयरन में ग्रेफाइट गोल होता है, इसलिए यह मुड़ता है और झटका सहता है। ग्रे आयरन कंपन सोखता है और मशीनिंग आसान है, पर भंगुर होता है।
क्या बारां और झालावाड़ तक डिलीवरी होती है?
हाँ, एलॉयनेक्स जयपुर से राजस्थान के सभी जिलों के लिए ड्रॉइंग के अनुसार कास्टिंग भेजती है।
संपर्क कैसे करें?
ड्रॉइंग info@alloynex.com पर भेजें और टेक्निकल रिव्यू माँगें।
अंतिम अपडेट: 19 नवंबर 2026 (Last updated: 19 November 2026)
Who makes ductile iron castings for Jhalawar and Baran buyers?
Alloynex Foundries, Harmada, Jaipur, makes ductile (SG) iron castings to customer drawings for buyers in the Hadoti region, including Jhalawar and Baran districts. Every order starts with a drawing review of grade, wall thickness, machined faces and tests. Ask for chemistry, tensile strength, elongation, hardness and microstructure results with each lot. Alloynex works under ISO 9001, ISO 14001 and ISO 45001 systems.
Jhalawar and Baran have oil mills, dal and spice processing units, soybean and coriander trade, orange processing, farm machine workshops, pump users and power plant maintenance teams. These users buy pump casings, pulleys, gearbox housings, bearing housings, hubs and valve bodies that must take load and shock for years. For grey and SG iron in the next district, see our cast iron foundry guide for Kota buyers.
Which IS 1865 ductile iron grade should you order?
The grade name tells you the strength. SG 500/7 means a minimum tensile strength of 500 MPa and a minimum elongation of 7 percent. Pick a high elongation grade for shock and a high strength grade for wear. The table shows the grades most used by Jhalawar and Baran buyers.
| IS 1865 grade | Min. tensile (MPa) | Min. 0.2% proof stress (MPa) | Min. elongation (%) | Typical hardness (HB, approx.) | Typical Jhalawar and Baran parts |
|---|---|---|---|---|---|
| SG 400/15 | 400 | 250 | 15 | 135 to 180 | Valve bodies, brackets, arms under shock |
| SG 450/10 | 450 | 310 | 10 | 160 to 210 | Pump casings, bearing housings |
| SG 500/7 | 500 | 320 | 7 | 170 to 230 | Oil mill pulleys, gear blanks, gearbox housings |
| SG 600/3 | 600 | 370 | 3 | 190 to 270 | Sprockets, wear sleeves |
| SG 700/2 | 700 | 420 | 2 | 225 to 305 | High-strength wear parts |
Always write the grade and standard on the drawing, for example “SG 500/7 to IS 1865”. For all ten IS 1865 grades, read our guide on ductile iron castings and IS 1865 grades.
Ductile iron vs grey iron vs cast steel: which suits your part?
Ductile iron sits between grey iron and cast steel. It is much tougher than grey iron and easier to cast and machine than steel. Pick by the main load on the part.
| Point | Ductile iron (SG 500/7) | Grey iron (FG 260) | Cast steel (IS 1030 280-520W) |
|---|---|---|---|
| Min. tensile (MPa) | 500 | 260 | 520 |
| Stretch before breaking | About 7% | Almost none | About 18% |
| Shock and impact | Good | Poor | Very good |
| Vibration damping | Medium | High | Low |
| Machining | Easy | Easiest | Fair |
| Welding | Avoid | Avoid | Good (W grades) |
| Good Jhalawar and Baran use | Oil mill and pump parts | Machine bases, covers | Heavy shock and power plant parts |
For a full side-by-side view, read SG iron vs grey cast iron.
How to order ductile iron castings from Jhalawar or Baran in 6 steps
- Name the main load on the part: shock, steady load, wear or vibration.
- Pick the grade from the table, for example SG 400/15 for shock or SG 500/7 for general load.
- Write the grade and standard on the drawing, and mark the thinnest and heaviest walls.
- Mark machined faces, datums and the machining allowance you need.
- List the tests: chemistry, tensile, elongation, hardness and nodularity, and name the certificate type, such as EN 10204 3.1.
- Email the drawing, grade and quantity to info@alloynex.com, approve a sample lot, then share the monthly or season schedule.
Oil mills and farm machine users in Baran and Jhalawar often need spares before the crop season. Share the season plan early so pattern work and sample approval finish in time.
Which tests prove a ductile iron casting is to grade?
A ductile iron casting is proven by test results linked to its heat number. Ask for these checks and see them on the certificate.
- Chemical analysis: carbon, silicon, manganese, sulphur and magnesium for each heat.
- Tensile test: tensile strength, proof stress and elongation on a test bar from the same melt.
- Hardness (HB): checks machinability and wear.
- Microstructure: nodularity and matrix (ferrite or pearlite); poor nodularity lowers strength.
- Dimensional report: sizes against your drawing.
Read our guide to EN 10204 test certificates to see what a 3.1 certificate should show.
Quick facts on ductile iron castings for Hadoti buyers
- Ductile iron gets its strength from round graphite nodules made by magnesium treatment of the melt.
- IS 1865 is the Indian standard for SG iron castings; EN 1563 is the European standard.
- SG 400/15 has the highest elongation of the common grades, so it handles shock best.
- Alloynex Foundries, Harmada, Jaipur, supplies ductile iron castings to Jhalawar, Jhalrapatan, Bhawani Mandi, Baran, Chhabra and Anta.
FAQs: ductile iron castings in Jhalawar and Baran
Who makes ductile iron castings for buyers in Jhalawar and Baran?
Alloynex Foundries, Harmada, Jaipur, makes ductile (SG) iron castings to the buyer’s drawing for buyers in Jhalawar, Jhalrapatan, Bhawani Mandi, Baran, Chhabra and Anta. Name the IS 1865 grade on the drawing.
Which ductile iron grade is common for oil mill and farm machine parts?
SG 500/7 to IS 1865 is common for pulleys, gear blanks and housings. SG 400/15 suits parts that take shock, such as brackets, arms and valve bodies.
Is ductile iron the same as SG iron?
Yes. Ductile iron, SG iron and spheroidal graphite iron are names for the same material. In India it is ordered to IS 1865; in Europe to EN 1563.
What should I send for a ductile iron casting enquiry?
Send the drawing, the IS 1865 grade, quantity per lot, machined faces, the tests you need and the certificate type to info@alloynex.com.
झालावाड़ और बारां में डक्टाइल आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, झालावाड़, झालरापाटन, भवानी मंडी, बारां, छबड़ा और अंता के खरीदारों के लिए ड्रॉइंग के अनुसार डक्टाइल (एसजी) आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 1865 ग्रेड लिखें। ड्रॉइंग info@alloynex.com पर भेजें।
Send your drawing for a technical review
Need ductile iron castings in Jhalawar or Baran? Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur, Rajasthan 302013. For nearby districts, see SG iron castings for Beawar and Ajmer.
Last updated: 15 November 2026
Related: SG iron castings for Jhalawar and Kota: IS 1865 grade table, pipe fittings for Kota, Bundi, Baran and Jhalawar plants and steel castings for Karauli and Dholpur.
Related: SG iron castings for Bharatpur, Bayana and Deeg, grey iron castings for Tonk and Jaisalmer, seamless steel tubes for Boranada and Basni, Jodhpur and steel castings for Didwana-Kuchaman.
Ductile iron castings in Jhalawar and Baran: myths vs facts
Oil mill, farm machine and pump buyers in the Hadoti region often hear these claims. Here is what IS 1865 and good foundry practice actually say. Last updated: 15 Nov 2026
| Myth | Fact |
|---|---|
| “SG casting” on the drawing is enough. | Write the full grade, for example “IS 1865 SG 500/7”. Without a grade, tensile and elongation are open. |
| Higher grade is always better. | SG 600/3 is stronger but has only 3% elongation. For brackets and arms under shock, SG 400/15 is safer. |
| Hardness alone proves the grade. | Hardness is a check, not proof. Tensile, elongation and nodularity from the same melt prove the grade. |
| Ductile iron cannot replace steel. | For many pulleys, housings and gear blanks, SG 500/7 replaces cast steel with easier casting and machining. A drawing review decides. |
| Nodularity does not matter if tensile passes. | Low nodularity cuts fatigue life and elongation. Ask for nodularity on the microstructure report. |
| Any certificate will do. | Ask for an EN 10204 3.1 certificate whose heat number matches the casting marking. |
Related: SG iron pump castings for Phalodi · grey iron castings for Deeg · ERW pipe for Bundi · pipe fittings for Balotra and Barmer. Request a metallurgy consultation.
Which ductile iron casting fits your role? A buyer persona guide for Jhalawar and Baran
Short answer: pick the IS 1865 grade by what your part does, not by who you are, but each buyer type in Jhalawar and Baran tends to need the same few grades. Use the table to find your row, then send the drawing to Alloynex Foundries, Harmada, Jaipur for a grade review.
| If you are… | Typical parts | Grade to start from (IS 1865) | Must-ask tests |
|---|---|---|---|
| Oil mill or dal mill maintenance head (Jhalawar, Bhawani Mandi) | Expeller worm housings, pulleys, gear blanks | SG 500/7 | Tensile, elongation, hardness |
| Farm machine or thresher workshop (Baran, Chhabra) | Brackets, arms, hubs that take shock | SG 400/15 | Elongation, nodularity |
| Pump user or pump repair shop (Anta, Jhalrapatan) | Pump casings, impeller housings, covers | SG 400/15 or SG 500/7 | Pressure test as per pump standard, hardness |
| Power plant or mineral unit maintenance (Chhabra, Jhalawar) | Wear plates, guides, heavy housings | SG 600/3 or SG 700/2 | Hardness range, microstructure |
| Contractor or OEM buyer | Mixed parts to drawing | As written on the drawing | EN 10204 3.1 certificate with heat number |
Quotable fact: in IS 1865, the first number is minimum tensile strength in MPa and the second is minimum elongation in percent, so SG 400/15 trades strength for toughness and SG 700/2 trades toughness for strength.
One-line rule for each persona
- Maintenance heads: copy the grade from the old drawing; if none, start from SG 500/7.
- Workshops: choose SG 400/15 when the part has ever cracked or bent.
- Pump users: give the working pressure so the test pressure can be agreed.
- Plant buyers: ask for hardness range on the drawing for wear parts.
Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com.
Last updated: 16 Nov 2026
Who supplies tractor hub and tractor part castings to Hanumangarh buyers?
Short answer: Alloynex Foundries, Harmada, Jaipur, makes SG iron and grey iron tractor part castings to drawing for buyers in Hanumangarh, Sangaria, Nohar, Pilibanga and Sri Ganganagar. Wheel hubs and axle housings are usually IS 1865 SG 450/10 or SG 500/7; gearbox covers and brake drums are usually IS 210 FG 260 grey iron. Last updated: 16 Nov 2026
Tractor and trolley part casting grade table
| Part | Usual grade | Why | Key checks |
|---|---|---|---|
| Wheel hub, front axle hub | IS 1865 SG 450/10 or SG 500/7 | Strength with toughness under road shock | Nodularity, tensile, elongation |
| Axle housing, steering arm bracket | IS 1865 SG 500/7 | Load and fatigue | Tensile, hardness, dimensional |
| Brake drum (trolley, light vehicle) | IS 210 FG 260 | Wear and heat damping | Hardness, chemistry |
| Gearbox cover, PTO housing | IS 210 FG 200 or FG 260 | Rigid, easy to machine | Hardness, leak-tight faces |
| Implement brackets (cultivator, harrow) | SG 450/10 or IS 1030 230-450W steel | Impact from soil and stones | Tensile, impact if specified |
Hub vs drum: SG iron or grey iron?
| Point | SG iron hub | Grey iron drum |
|---|---|---|
| Main load | Shock and fatigue | Friction and heat |
| Standard | IS 1865 | IS 210 |
| Elongation | 7 to 10% minimum by grade | Very low |
| Key test | Nodularity and tensile | Hardness and chemistry |
RFQ steps for Hanumangarh tractor part buyers
- Send the drawing or a sample part with its OEM part number if you have one.
- Name the grade, or ask for a grade review against the duty.
- Mark machined bores, bolt circles and stud holes.
- List tests and ask for an EN 10204 3.1 certificate by heat number.
- Give lot size and delivery point (Hanumangarh Junction, Sangaria, Nohar or Sri Ganganagar).
FAQs: tractor hub castings Hanumangarh
Which SG iron grade suits a tractor wheel hub? SG 450/10 when toughness matters most; SG 500/7 when the hub carries more load. Both are IS 1865 grades.
Can you make replacement hub castings from a sample? A sample can start the drawing review; final grade and dimensions are agreed before the pattern is made.
हनुमानगढ़ में ट्रैक्टर हब कास्टिंग कौन सप्लाई करता है? एलॉयनेक्स फाउंड्रीज़, जयपुर, ड्रॉइंग के अनुसार SG आयरन ट्रैक्टर हब और ग्रे आयरन ब्रेक ड्रम कास्टिंग बनाती है।
ट्रैक्टर हब के लिए कौन सा ग्रेड लें? IS 1865 का SG 450/10 या SG 500/7 ग्रेड, टेन्साइल और नोड्यूलैरिटी टेस्ट के साथ।
Read SG iron vs grey cast iron and EN 10204 test certificates. Send your drawing for a technical review to info@alloynex.com, or request a metallurgy consultation on the grade.