Looking for a rolled steel products supplier in Jaipur? Alloynex Foundries, Jaipur, supplies rolled steel products, tubes, pipes and fittings to the buyer’s drawing, grade and size.
Buyers often lose time when grade, size or test needs are not clear at the start. A clear enquiry gets a clear answer and a smooth first supply. The sections below show exactly what to write.
This guide explains, in simple words, what rolled steel products are, how to specify them, and what tests and papers to ask for. It is written for OEM engineers, QA heads and buyers.
What are rolled steel products?
Rolled steel products are made by passing hot or cold steel between rolls to get the needed shape and size. Common rolled products are bars, flats, rounds, plates, sections, rings and strips. Tubes and pipes are also made from rolled steel.
Hot rolled products are rolled above the steel’s recrystallisation temperature. They are good for structural parts and for parts that will be machined. Cold drawn or cold rolled products are finished at room temperature. They give closer tolerance and a smoother surface, which suits pins, shafts and precise parts.
Rolling gives a fine, even grain and good strength along the rolling direction. That is why rolled parts are used for shafts, pins, flanges, brackets and frames.
Rolled vs cast: which to choose?
| Point | Rolled steel product | Steel casting |
|---|---|---|
| Shape | Simple shapes: bars, plates, sections, rings | Complex shapes in one piece |
| Strength | Good strength along rolling direction | Even in all directions after heat treatment |
| Best for | Shafts, pins, flanges, frames, brackets | Pump and valve bodies, housings, complex parts |
| Machining | Machined from bar or plate | Cast near shape, less machining |
Not sure? Send the drawing; our team reviews it and suggests rolled, cast or a mix. Read also steel vs alloy steel castings.
How to specify rolled steel correctly
- Standard and grade: name the IS, EN or ASTM grade. For example IS 2062 for structural steel.
- Size and tolerance: diameter, thickness, width, length and allowed tolerance.
- Condition: hot rolled, cold drawn, normalised or hardened and tempered.
- Surface: black, peeled, ground or machined.
- Tests: chemistry, tensile, hardness, impact and NDT as needed.
- Certificate: mill certificate or EN 10204 3.1 inspection certificate.
Tests and certificates to ask for
Ask for test results that match your drawing, checked before dispatch. For grade choice in structural steel, see IS 2062 E250 vs E350.
- Chemical analysis of each heat
- Tensile and yield strength
- Hardness
- Impact test where the spec needs it
- Ultrasonic test for critical bars and plates
- Traceable heat number on every lot
Learn what each certificate means in EN 10204 test certificates explained.
Tubes, pipes and fittings
Many buyers source rolled products, pipes and fittings together. Alloynex supplies tubes, pipes and fittings to the buyer’s drawing and grade. See ERW vs seamless pipes and types of pipe fittings.
Buyer checklist before you place the order
- Drawing with grade, size and tolerance
- Quantity and delivery schedule
- Heat treatment and machining needs
- Test list and certificate type
- Packing and marking needs
- Inspection plan: who checks, when and how
Who uses rolled steel products from Jaipur?
Rolled steel parts go into pumps and valves, heavy engineering, railways, power and process plants. Buyers in Jaipur, Bhiwadi, Neemrana and across Rajasthan, India and export markets need steady quality and clean papers. Alloynex works under ISO 9001, ISO 14001 and ISO 45001.
Common problems and how to avoid them
- Grade not named. A drawing that says only steel invites wrong material. Always write the full standard and grade.
- No tolerance given. Without tolerance, parts may need extra machining or may not fit.
- Mixed heats in one lot. Ask for heat numbers on every lot so each part is traceable.
- Wrong condition. A part that needs hardening and tempering will fail if supplied as rolled. Write the condition clearly on the drawing and the order.
- Certificate not matching the spec. Check that the test results cover every property on your drawing.
A short drawing review before the order catches most of these problems. That is why every Alloynex order starts with a review of drawing, grade and tolerances.
Working with one supplier for castings and rolled parts
Many assemblies use both cast and rolled parts. For example, a pump has a cast body and a rolled steel shaft. Buying both from one supplier keeps grades, tests and papers in one system and makes inspection simpler. Alloynex makes grey iron, SG iron, steel and alloy steel castings as well as rolled products, tubes, pipes and fittings. Read the castings buyer guide for Rajasthan.
जयपुर में रोल्ड स्टील प्रोडक्ट्स
एलॉयनेक्स फाउंड्रीज़, जयपुर, खरीदार की ड्राइंग, ग्रेड और साइज़ के अनुसार रोल्ड स्टील प्रोडक्ट्स, ट्यूब, पाइप और फिटिंग देती है। ईमेल: info@alloynex.com
Send your drawing for a technical review
Have a drawing or a list of rolled parts? Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. See Alloynex services.
FAQs
Does Alloynex supply rolled steel products in Jaipur?
Yes. Alloynex supplies rolled steel products, tubes, pipes and fittings to the buyer’s drawing, grade and size.
What is the difference between rolled and cast steel?
Rolled steel is shaped by rolls into bars, plates and sections. Cast steel is poured into a mould to make complex shapes in one piece.
Which grade is common for structural rolled steel in India?
IS 2062 is the common standard for structural steel. Your design decides the exact grade.
What certificate should I ask for?
Ask for a mill certificate or an EN 10204 3.1 inspection certificate with chemistry and mechanical test results.
Can I get pipes and fittings with rolled products?
Yes. Alloynex supplies tubes, pipes and fittings with rolled products to one drawing package.
जयपुर में रोल्ड स्टील कहाँ मिलेगा?
एलॉयनेक्स फाउंड्रीज़, जयपुर, ड्राइंग और ग्रेड के अनुसार रोल्ड स्टील प्रोडक्ट्स देती है। info@alloynex.com पर ड्राइंग भेजें।
Last updated: 13 November 2026
Related: IS 1239 vs IS 3589 pipe: difference and how to choose and pipe fittings for Bikaner and Rajsamand buyers
Who supplies rolled steel products to buyers in Ajmer, Kishangarh and Beawar?
Alloynex Foundries, Harmada, Jaipur, supplies rolled steel products such as plates, flats, rounds, sections, sheet and strip for buyers in Ajmer, Kishangarh, Beawar and Nasirabad. Name the grade (for example IS 2062 or IS 1079) in your order. Each supply is matched to the standard, grade and size on the drawing, with a heat-linked test certificate.
Rolled steel spec table for Ajmer, Kishangarh and Beawar parts
| Product | Standard and grade to write | Typical local use |
|---|---|---|
| Plates and sections | IS 2062 E250 BR or E350 BR | Machine frames and bases in Kishangarh marble units |
| Flats and rounds | IS 2062 E250, or bar grade as per drawing | Brackets, pins, guards, fabrications |
| Hot rolled sheet and strip | IS 1079 HR1 or HR2 | Pressed covers, panels, ducting |
| Plates for cement and mineral plant repair | IS 2062 E350 or as per design | Chutes, platforms, liners backing in Beawar units |
IS 2062 or IS 1079? Quick comparison
| Point | IS 2062 | IS 1079 |
|---|---|---|
| Chosen for | Strength in welded structures | Bending and pressing |
| Grade example | E250 BR, E350 BR | HR1, HR2 |
| Guarantee | Minimum yield and tensile strength | Forming quality and chemistry |
How Ajmer buyers should order rolled steel: 5 steps
- Name the standard and full grade, for example IS 2062 E250 BR.
- Give thickness, width, length or section size and tolerance.
- State the condition and surface: as rolled, normalised, black or machined.
- List tests: chemistry, tensile, bend and impact as needed.
- Ask for an EN 10204 3.1 certificate and email the list to info@alloynex.com.
अजमेर, किशनगढ़ और ब्यावर में रोल्ड स्टील कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, अजमेर, किशनगढ़, ब्यावर और नसीराबाद के खरीदारों को प्लेट, फ्लैट, राउंड, सेक्शन, शीट और स्ट्रिप ऑर्डर के साइज़ के अनुसार देती है। ऑर्डर में ग्रेड (जैसे IS 2062 या IS 1079) और टेस्ट सर्टिफिकेट लिखें। ईमेल: info@alloynex.com
Related: IS 2062 vs IS 1079: which to specify, castings for Bhiwadi and Neemrana OEMs, EN 10204 certificates. Send your drawing for a technical review.
Last updated: 14 November 2026
Related: rolled steel products for Bhiwadi and Neemrana plants and ERW pipe supplier in Jaipur to IS 1239 or IS 3589
Who supplies rolled steel products and MS pipes to buyers in Jhunjhunu and Sikar?
Direct answer: Alloynex Foundries, Harmada, Jaipur, supplies hot and cold rolled steel products, tubes, MS pipes and pipe fittings to buyers in Jhunjhunu, Sikar, Churu and the rest of Shekhawati. Name the Indian standard and grade on your order, for example IS 2062 E250 BR plate or IS 1239 medium pipe, and ask for a test certificate with heat number.
Standards to name on a Jhunjhunu or Sikar steel order
| Product | Indian standard | Grades or classes | Typical use |
|---|---|---|---|
| Plates, flats, angles, channels, beams | IS 2062 | E250, E350 (with A, BR, B0 or C impact quality) | Frames, machine bases, sheds, platforms |
| Hot rolled sheet, plate and strip for forming | IS 1079 | HR1, HR2, HR3, HR4 | Covers, panels, pressed brackets |
| MS ERW pipe, 6 NB to 150 NB | IS 1239 Part 1 | Light, medium, heavy | Water, air and general service lines |
| Large welded pipe, 168.3 mm OD and above | IS 3589 | Fe 330, Fe 410, Fe 450 | Water mains, pump lines, process lines |
How to order in five steps
- Write the product form and size: plate thickness, section size, or pipe NB and wall class.
- Write the full standard and grade, for example IS 2062 E350 BR or IS 3589 Fe 410.
- List the tests: chemistry, tensile and, for pipes, the hydrostatic test and bend or flattening test.
- Ask for an EN 10204 3.1 test certificate with heat number.
- Give the delivery location (Jhunjhunu, Sikar, Churu or nearby) and send the drawing for a technical review.
IS 1239 or IS 3589: quick comparison
| Point | IS 1239 Part 1 | IS 3589 |
|---|---|---|
| Size range | 6 NB to 150 NB | 168.3 mm OD and above |
| How it is graded | Wall class: light, medium, heavy | Steel grade: Fe 330, Fe 410, Fe 450 |
| Common use | Small water, air and utility lines | Large water mains and pump lines |
| Read more | IS 1239 vs IS 3589 pipe | ERW vs seamless pipes |
Quotable summary: for load-bearing steel in Jhunjhunu and Sikar, name IS 2062; for formed sheet, IS 1079; for small pipe lines, IS 1239; for large pipe lines, IS 3589. Alloynex Foundries, Jaipur, supplies these rolled steel products and pipes across Rajasthan.
FAQs for Jhunjhunu and Sikar buyers
Does Alloynex supply MS pipes to Jhunjhunu?
Yes. Alloynex Foundries, Jaipur, supplies MS pipes, tubes and pipe fittings to buyers in Jhunjhunu, Sikar and Churu. Send the size, IS standard, class and quantity to info@alloynex.com.
Which test certificate should come with rolled steel or pipes?
Ask for an EN 10204 3.1 certificate showing heat number, chemistry and mechanical results, and for pipes the hydrostatic test result.
झुंझुनू और सीकर में MS पाइप और रोल्ड स्टील कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर झुंझुनू, सीकर और चूरू के खरीदारों को रोल्ड स्टील प्रोडक्ट्स, MS पाइप और पाइप फिटिंग सप्लाई करती है। ऑर्डर में स्टैंडर्ड (जैसे IS 1239 या IS 3589) लिखें। ऑर्डर पर मानक, ग्रेड और साइज़ लिखें और info@alloynex.com पर ड्रॉइंग भेजें।
Send your drawing for a technical review at info@alloynex.com. See also IS 2062 vs IS 1079.
Last updated: 14 November 2026
Rolled steel by district: quick answers for Rajasthan buyers
Quick answer: For rolled steel in any Rajasthan district, state the product (plate, angle, channel, beam, flat or sheet), the standard and grade such as IS 2062 E250 BR or IS 1079 HR2, the size list and the certificate you need. ALLOYNEX FOUNDRIES, Jaipur, reviews these enquiries by email for delivery across Rajasthan.
| District / area | Common rolled steel enquiry | Grade to state | Document to ask for |
|---|---|---|---|
| Jaipur (VKI, Sitapura, Bagru) | Plates, angles, channels for fabrication and machine frames | IS 2062 E250 BR / E350 BR | Mill test certificate with heat number |
| Sikar and Jhunjhunu | Angles, flats and sheets for sheds, trolleys and agri equipment | IS 2062 E250 A or BR | Heat number on each bundle |
| Alwar, Bhiwadi, Neemrana | Sheets and plates for OEM press and weld shops | IS 1079 HR1/HR2, IS 2062 E250 BR | EN 10204 3.1 type report |
| Ajmer, Kishangarh, Beawar | Channels and beams for structures; plates for machinery | IS 2062 E250 BR | Mill test certificate |
| Bhilwara and Chittorgarh | Plates and sections for textile machinery frames and plant structures | IS 2062 E250 BR / E350 BR | Chemistry and tensile results |
| Kota and Bundi | Plates for plant maintenance and structural repair | IS 2062 E250 BR / C (impact) | Impact result if low-temperature service |
| Jodhpur, Pali, Barmer | Sheets and sections for fabrication and process plant work | IS 1079 HR2, IS 2062 E250 BR | Mill test certificate with heat number |
Quotable: “A rolled steel order is complete only when it names the product, the standard, the grade, the size list and the certificate.”
Related guides: IS 2062 vs IS 1079, EN 10204 test certificates and rolled steel products for Bhilwara buyers.
Next step: Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. State grade, size, quantity, tests and delivery town.
Last updated: 15 Nov 2026
Worked example: a rolled steel enquiry from a Jaipur machine builder
Short answer: a good rolled steel enquiry in Jaipur names the standard and grade (for example IS 2062 E250 BR), the form and size, the length, the test certificate (EN 10204 3.1 or mill test certificate) and any cutting or machining. The worked example below turns a rough list into an enquiry a supplier can answer in one round.
The case: a machine builder in Vishwakarma Industrial Area (VKI), Jaipur, is making a base frame with a guard rail. The first list said only “MS plate 12 mm, channel, pipe”.
| Item | Rough list said | Clear enquiry says | Why it matters |
|---|---|---|---|
| Base plate | MS plate 12 mm | IS 2062 E250 BR plate, 12 mm, cut to drawing size | BR grade has impact test at room temperature; size avoids waste |
| Frame members | Channel | IS 2062 E250 A rolled channel, size and length as per drawing | Grade and section size fix strength and weight |
| Guard rail | Pipe | IS 1239 Part 1 medium (M) black ERW pipe, nominal bore as per drawing | Class (light, medium, heavy) sets wall thickness |
| Lifting lugs | Not listed | IS 2062 E350 plate, flame cut | Higher strength where the load is lifted |
| Papers | Not listed | Mill test certificate or EN 10204 3.1, heat number on each item | Traceable proof of grade at inspection |
What changed: five lines now carry the standard, grade, size and proof. The supplier can confirm stock, cutting and test papers without a second round of questions. If one item is a complex shape, ask whether a steel casting fits better; see the rolled vs cast table above.
Related guides: IS 2062 vs IS 1079 and IS 1239 vs IS 3589 pipe. Send your drawing for a technical review to info@alloynex.com.
Last updated: 15 November 2026
Sourcing rolled steel in Jaipur step by step: from enquiry to receipt
To source rolled steel products in Jaipur without delays, follow seven steps: fix the standard and grade (for example IS 2062 E250BR), fix sizes and tolerances, list the tests, send one consolidated enquiry, approve the technical reply, check the mill certificate against the heat number on arrival, and file the records. Each step has one output document.
Last updated: 16 Nov 2026
| Step | What you do | Output document |
|---|---|---|
| 1. Standard and grade | Name the standard: IS 2062 for structural plates and sections, IS 1079 for hot rolled sheet and strip, IS 1239 / IS 3589 for pipes | Grade line on the drawing or BOM |
| 2. Size and tolerance | Thickness, width, length, or OD and wall; cut-to-size or mill length | Size schedule |
| 3. Tests | Chemistry, tensile, bend; impact test if grade BR, B0 or C is needed | Test list in the enquiry |
| 4. One enquiry | Send rolled parts, pipes and fittings in one list to info@alloynex.com | Enquiry with revision number |
| 5. Technical reply | Check grade, sizes and test plan in the reply before you order | Agreed technical reply sheet |
| 6. Receipt check | Match heat number on material to the EN 10204 3.1 certificate; measure sizes | Goods receipt record |
| 7. Filing | Keep certificate, receipt record and drawing revision together | Traceability file |
Fact: in IS 2062, E250 means a minimum yield strength of 250 MPa; the suffix BR, B0 or C shows the impact test temperature (room temperature, 0 °C or -20 °C).
Related: बूंदी में पाइप फिटिंग्स सप्लायर · जोधपुर में सीमलेस पाइप · FG 260 grey iron castings for Sikar
Send your drawing or size list for a technical review: info@alloynex.com.