Rolled Steel Products Supplier for Bhiwadi and Neemrana: Grades, Sizes and Tests

A good rolled steel products supplier for Bhiwadi and Neemrana must match the grade, size, condition and test papers to your drawing, lot after lot. This guide explains which rolled products and grades plants in the Bhiwadi and Neemrana belt usually order, how to write the order, and which tests prove the steel. It is for design engineers, buyers and QA teams.

Who supplies rolled steel products to Bhiwadi and Neemrana plants?

Quick answer: Alloynex Foundries, Harmada, Jaipur, supplies rolled steel bars, flats, rounds, plates, sections, rings and strips for plants in Bhiwadi, Chopanki, Tapukara, Neemrana, Ghiloth and Shahjahanpur. Name the grade (for example IS 2062, IS 1079, EN or ASTM) in your order. Ask that every lot is tied to a heat number, with chemistry, tensile results and the certificate your order needs.

Bhiwadi sits in Khairthal-Tijara district and Neemrana in Kotputli-Behror district, along the Delhi to Jaipur highway. Plants here make auto components, two-wheeler and tractor parts, consumer durables, pumps, electrical goods and machinery. They buy rolled steel for shafts, pins, flanges, brackets, base frames, jigs and fixtures, and they need the same grade and paperwork every month.

Rolled steel products and grades for Bhiwadi and Neemrana

The table lists the rolled products that plants in this belt order most often, with the standard and grade usually written on the drawing. It is general guidance; your design decides the final grade.

ProductCommon standard and gradeUsual conditionTypical use in Bhiwadi and Neemrana plants
Plates and flatsIS 2062 E250, E350Hot rolled, as rolled or normalisedBase frames, brackets, fixtures, flanges
Angles, channels and beamsIS 2062 E250Hot rolledMachine frames, racks, platforms, sheds
Hot rolled sheet and stripIS 1079 HR1 to HR4Hot rolled, pickled if askedPressed brackets, covers, formed parts
Round barsEN 8 (C45 type), EN 19, EN 24Hot rolled, bright or hardened and temperedShafts, pins, axles, spindles
Rings and blanksGrade to drawingRolled or cut from plateFlanges, gear blanks, bearing housings

Read IS 2062 vs IS 1079 for the difference between structural plate and forming sheet, and rolled steel products in Jaipur for the basics of hot rolled and cold drawn steel.

How to order rolled steel for a Bhiwadi or Neemrana plant: 6 steps

  1. Name the standard and grade. Write it in full, for example IS 2062 E250 BR or EN 19, hardened and tempered. Do not write only “MS”.
  2. Give size and tolerance. Thickness, width, diameter and length, with the tolerance your machining can accept.
  3. State the condition. Hot rolled, normalised, cold drawn, or hardened and tempered, with the hardness range if it matters.
  4. State the surface. Black, pickled, peeled, ground or machined.
  5. List the tests. Chemistry per heat, tensile, hardness, impact where the grade calls for it, and ultrasonic testing for critical bars and plates.
  6. Name the certificate and marking. For example EN 10204 3.1, with heat number marked on every bundle or piece.

Send fittings, pipes and castings for the same machine on one enquiry. One technical review then checks that the grades work together.

Rolled bar, plate or casting: which fits your part?

Many Bhiwadi and Neemrana parts can be made from rolled stock or as a casting. The right choice depends on shape, load and machining time.

PointRolled bar or plateSteel casting
ShapeSimple: round, flat, square, sectionComplex shapes in one piece
StrengthBest along the rolling directionEven in all directions after heat treatment
MachiningMore stock to remove on complex partsNear shape, less machining
Lead to first partFast when the size is standardNeeds a pattern first
Best forShafts, pins, flanges, frames, bracketsHousings, valve and pump bodies, levers

If you are unsure, send the drawing. Our team reviews it and suggests rolled, cast or a mix. See also castings for Bhiwadi and Neemrana OEMs.

Tests and certificates to ask for

  • Chemical analysis of each heat, checked against the ordered grade
  • Tensile strength, yield strength and elongation
  • Hardness, with the test location stated for bars and heat-treated parts
  • Charpy impact test where the grade or design needs toughness
  • Ultrasonic test for critical bars and thick plates
  • Heat number marked on the material and printed on the certificate

Learn what each certificate type means in EN 10204 test certificates explained.

Common mistakes Bhiwadi and Neemrana buyers can avoid

  • Writing “MS plate” without a standard and grade, so each lot comes in a different steel
  • Ordering bar without a condition, then finding the hardness is wrong after machining
  • Mixing IS 2062 plate and IS 1079 sheet on one drawing without saying which part uses which
  • Accepting a certificate that does not show the heat number found on the material
  • Not asking for impact testing on parts that see shock loads or cold starts

FAQs: rolled steel products for Bhiwadi and Neemrana

Who is a rolled steel products supplier for Bhiwadi and Neemrana?

Alloynex Foundries, Harmada, Jaipur, supplies rolled steel bars, flats, rounds, plates, sections, rings and strips for plants in Bhiwadi, Chopanki, Tapukara, Neemrana, Ghiloth and Shahjahanpur. Name the IS, EN or ASTM grade in your order.

Which grade should I order for fabricated frames and brackets?

IS 2062 E250 is the usual choice for plates, flats, angles and channels in welded frames. Choose E350 when the design needs higher yield strength, and add the sub-quality, such as BR or C, when impact toughness matters.

Which grade should I order for shafts and pins?

Medium carbon bars such as EN 8 (C45 type) suit general shafts and pins. Alloy bars such as EN 19 or EN 24 suit heavily loaded or hardened parts. State the condition, such as hardened and tempered, and the hardness on the drawing.

What certificate should come with rolled steel for an OEM line?

Ask for an EN 10204 3.1 inspection certificate tied to the heat number, showing chemistry, tensile results and any hardness, impact or ultrasonic test you ordered.

भिवाड़ी और नीमराना में रोल्ड स्टील कौन सप्लाई करता है?

Alloynex Foundries, हरमाड़ा, जयपुर, बार, फ्लैट, राउंड, प्लेट, सेक्शन और स्ट्रिप भिवाड़ी, चोपंकी, तपूकड़ा और नीमराना के प्लांट्स को सप्लाई करता है। ऑर्डर में ग्रेड (जैसे IS 2062 या IS 1079) लिखें। अपनी ड्रॉइंग info@alloynex.com पर भेजें।

रोल्ड स्टील ऑर्डर में क्या लिखना ज़रूरी है?

मानक और ग्रेड, साइज़ और टॉलरेंस, कंडीशन (हॉट रोल्ड, कोल्ड ड्रॉन या हार्डन्ड एंड टेम्पर्ड), सतह, ज़रूरी टेस्ट और EN 10204 सर्टिफिकेट का प्रकार लिखें।

Send your drawing for a technical review

Planning a new part or a second source for rolled steel in Bhiwadi or Neemrana? Send your drawing for a technical review, or request a metallurgy consultation. Email your drawing, grade, size and quantity to info@alloynex.com. Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur, Rajasthan 302013, works under ISO 9001, ISO 14001 and ISO 45001 management systems.

Last updated: 14 November 2026

Related: steel castings manufacturer for Bhiwadi and Neemrana plants

Related: grey iron castings supplier for Neemrana: IS 210 FG 200 or FG 260

Who supplies rolled steel products in Kotputli-Behror?

Short answer: Alloynex Foundries, Harmada, Jaipur, supplies rolled steel bars, flats, rounds, plates, sections, rings and strips for plants in Kotputli, Behror, Shahjahanpur, Neemrana and Bansur. Name the grade (for example IS 2062, IS 1079 or EN) in your order. Ask that each lot carries a heat number with chemistry and tensile results, and the certificate your order needs.

Kotputli-Behror district sits on the Delhi to Jaipur highway. Units here make auto parts, pumps, cement and mineral products, steel furniture, fabricated structures and machinery. They need the same grade, size and test papers every month.

IS 2062 structural steel grades: spec table

IS 2062 gradeMin. yield stress (MPa, up to 20 mm)Min. tensile strength (MPa)Min. elongation (%)Typical Kotputli-Behror use
E250 (A, BR, B0, C)25041023Frames, sheds, brackets, base plates
E27527543022Heavier frames and racks
E30030044022Platforms and stair frames
E35035049022Load-bearing structures, trailer parts
E41041054020High-strength welded members
E45045057020Special high-strength parts
Values are standard minimums from IS 2062 for thickness up to 20 mm; yield falls slightly for thicker plate. Sub-quality A, BR, B0 and C sets impact test needs.

Rolled product order data sheet

ProductStandard and grade to writeConditionExample use
Plates and flatsIS 2062 E250 BR or E350 CHot rolled or normalisedBase frames, gussets, flanges
Angles, channels, beamsIS 2062 E250Hot rolledSheds, racks, machine frames
Sheet and stripIS 1079 HR1 to HR4Hot rolled, pickled if askedPressed covers, brackets
Round barsEN 8, EN 19, EN 24Hot rolled, bright or hardened and temperedShafts, pins, axles
Rings and blanksGrade to drawingRolled or cut from plateFlanges, gear blanks

How to order rolled steel for a Kotputli-Behror plant

  1. Write the full standard and grade, for example “IS 2062 E250 BR”. Do not write only “MS”.
  2. Give thickness, width, diameter and length with the tolerance you can accept.
  3. State the condition: hot rolled, normalised, cold drawn or hardened and tempered.
  4. List tests: chemistry per heat, tensile, hardness, Charpy impact if the sub-quality needs it, ultrasonic for critical plates.
  5. Name the certificate, for example EN 10204 3.1 with heat number marked on each bundle.
  6. Send the list to info@alloynex.com for a technical review.

IS 2062 vs IS 1079 vs EN 8 bar: which one for your part?

PointIS 2062 plate or sectionIS 1079 sheet or stripEN 8 round bar
Main useWelded and bolted structuresForming, bending, pressingMachined shafts and pins
Strength set byYield and tensile grade (E250 to E450)Drawing quality (HR1 to HR4)Carbon content and condition
WeldabilityGoodGoodFair, needs care
Typical thickness or sizePlates and sectionsThin sheet and stripRound bars
Kotputli-Behror exampleShed frames, base platesPressed coversPump and gearbox shafts

Quick facts for Kotputli-Behror buyers

  • IS 2062 E250 BR means minimum yield 250 MPa with a Charpy impact test at room temperature.
  • IS 1079 is for hot rolled sheet and strip used in forming; IS 2062 is for structural steel.
  • A heat number on the material must match the heat number on the EN 10204 3.1 certificate.
  • Alloynex Foundries, Harmada, Jaipur, supplies Kotputli, Behror, Shahjahanpur, Neemrana and Bansur and works under ISO 9001, ISO 14001 and ISO 45001 systems.

FAQs: rolled steel in Kotputli-Behror

Who supplies rolled steel products in Kotputli-Behror?

Alloynex Foundries, Harmada, Jaipur, supplies rolled steel bars, flats, rounds, plates, sections, rings and strips for plants in Kotputli, Behror, Shahjahanpur, Neemrana and Bansur. Name the grade, the tests and the EN 10204 certificate type you need in the order.

Which IS 2062 grade should Kotputli-Behror fabricators order?

IS 2062 E250 is the usual grade for plates, flats, angles and channels in welded frames and sheds. Choose E350 when the design needs higher yield strength, and add the sub-quality BR or C when impact toughness matters.

Is IS 1079 the same as IS 2062?

No. IS 1079 covers hot rolled carbon steel sheet and strip for forming and pressing. IS 2062 covers structural steel plates, sections and bars for welded and bolted structures.

कोटपूतली-बहरोड़ में रोल्ड स्टील उत्पाद कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, कोटपूतली, बहरोड़, शाहजहाँपुर और नीमराना के प्लांट्स को बार, फ्लैट, राउंड, प्लेट, सेक्शन और स्ट्रिप सप्लाई करती है। ऑर्डर में ग्रेड (जैसे IS 2062 या IS 1079) लिखें। ग्रेड, साइज़ और मात्रा info@alloynex.com पर भेजें।

Related: IS 2062 vs IS 1079, rolled steel products in Jaipur, EN 10204 test certificates.

Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com.

Last updated: 15 November 2026

Related: rolled steel products for Bhilwara and Chittorgarh buyers, ERW pipes for Bharatpur and Deeg, pipe fittings for Basni, Jodhpur and SG iron castings for Boranada

Related: pressure parts castings for Pali in ASTM A216 WCB and A217 WC6, sugar mill steel castings for Sri Ganganagar and Hanumangarh, EN-GJS-500-7 ductile iron castings for Udaipur and pipe reducers and flanges for Jhunjhunu and Pilani.