Steel Castings for Didwana-Kuchaman: Grades, Tests and How to Order

Short answer: Alloynex Foundries, Harmada, Jaipur, makes carbon steel and alloy steel castings to customer drawings for buyers in Didwana-Kuchaman district, including Didwana, Kuchaman City, Makrana, Ladnun, Nawa and Parbatsar. Most general parts are ordered in IS 1030 grades such as 230-450W or 280-520W. Heavy wear parts often move to IS 276 high manganese steel. Ask for heat-wise test results with each lot.

Last updated: 15 November 2026

This guide is for plant engineers, maintenance heads and buyers in the marble, stone, salt and engineering units of Didwana-Kuchaman. It explains which steel casting grade to choose, which tests to ask for, and how to send a clear enquiry. Send your drawing for a technical review at info@alloynex.com.

Who supplies steel castings to Didwana-Kuchaman?

Alloynex Foundries is in Harmada, Jaipur, and supplies buyers across Rajasthan. For Didwana-Kuchaman, typical parts include gang-saw and block-cutter machine parts for Makrana marble units, crusher and conveyor parts for stone and mineral plants, pump and valve parts for salt works around Nawa and Didwana, and brackets, hubs and housings for local engineering shops.

We make grey iron, SG iron, steel and alloy steel castings to the buyer’s drawing, under ISO 9001, ISO 14001 and ISO 45001 management systems. Before production, our team checks the drawing, the grade, the machining allowance and the tests you need.

Which steel casting grades suit Didwana-Kuchaman parts?

The table lists common Indian steel casting grades. Values are IS 1030 minimums for general education. Tell us the grade on your drawing and we confirm it in the technical review.

Grade (IS 1030)Min. tensile (MPa)Min. yield (MPa)Min. elongation (%)Typical Didwana-Kuchaman part
200-400W40020025Brackets, covers, weld-on parts
230-450W45023022Pump bodies, valve bodies, frames
280-520W52028018Gang-saw parts, hubs, gear blanks
340-570W57034015Loaded housings, crusher frames

For heavy impact and abrasion, such as crusher jaws, liners and hammer parts, buyers often name IS 276 high manganese steel. For high temperature or deep hardening, an alloy steel grade may be needed. See IS 1030 steel casting grades explained and steel vs alloy steel castings.

Steel casting or iron casting: which is right for your part?

NeedSteel casting (IS 1030)SG iron (IS 1865)Grey iron (IS 210)
Heavy shock and impactBestGoodPoor
Welding or weld repairGood (W grades)LimitedPoor
Vibration dampingFairGoodBest
Ease of machiningFairGoodBest
Typical useGang-saw parts, crusher frames, hubsPump parts, bracketsMachine beds, covers

If the part takes shock from stone blocks or needs welding at site, choose steel. If it mainly needs damping and easy machining, iron is often enough. Our guide on SG iron vs grey cast iron covers the iron side.

How do you choose and order steel castings? Five steps

  1. Describe the load. Static, rotating, shock, wear or heat. This decides the grade family.
  2. Write the grade and standard on the drawing, for example “IS 1030 280-520W”, not just “cast steel”.
  3. State heat treatment. Most carbon steel castings are normalised; alloy steel may be hardened and tempered. See heat treatment of castings.
  4. List tests and the certificate type, for example chemistry, tensile, hardness and EN 10204 3.1 per heat.
  5. Approve a first sample, including machining and fit, before lot supply.

What tests should come with steel castings?

CheckWhat it provesWhen to ask
Chemical analysis per heatGrade chemistry is rightAlways
Tensile, yield, elongationStrength and ductility meet IS 1030Always
HardnessHeat treatment and wear levelWear parts, machined parts
Dimensional reportFit and machining stockFirst article, then per lot
Ultrasonic or magnetic particleNo hidden or surface cracksCritical or pressure parts, if agreed
Heat-treatment recordCorrect cycle was usedNormalised or hardened parts

Name the certificate type on your order. An EN 10204 3.1 certificate links the results to the heat number on the part. Read more in EN 10204 test certificates explained.

What should a Didwana-Kuchaman enquiry include?

  • Drawing with tolerances and revision; a 3D model if you have one
  • Grade and standard, and heat-treatment condition
  • Machining scope: as-cast, rough or finish
  • Quantity per lot and yearly need
  • Tests, certificate type and any third-party inspection
  • Delivery town, for example Kuchaman City, Makrana or Didwana

Buyers in nearby districts can also read our steel castings guide for Karauli and Dholpur, which follows the same grade logic.

FAQs

Who supplies steel castings to Didwana-Kuchaman?

Alloynex Foundries, Harmada, Jaipur, makes carbon steel and alloy steel castings to customer drawings for buyers in Didwana, Kuchaman City, Makrana, Ladnun, Nawa and Parbatsar.

Which steel casting grade is common for general machine parts?

IS 1030 grade 230-450W or 280-520W is common for general machine parts. The W grades are made for good weldability, which helps when parts need repair or weld-on brackets.

Which steel suits wear parts in marble and stone machines?

For parts that face heavy impact and abrasion, buyers often specify IS 276 high manganese steel. For wear with less impact, a hardened low-alloy steel may suit. Send your drawing for a technical review.

What tests should come with steel castings?

Chemistry and tensile results per heat, hardness, a dimensional report for the first part, the heat-treatment record and an EN 10204 3.1 certificate. Ultrasonic or magnetic particle tests are added for critical parts when agreed.

डीडवाना-कुचामन में स्टील कास्टिंग कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, डीडवाना, कुचामन सिटी, मकराना, लाडनूं और नावां के खरीदारों के लिए ड्रॉइंग के अनुसार कार्बन स्टील और अलॉय स्टील कास्टिंग बनाती है। ड्रॉइंग info@alloynex.com पर भेजें।

मकराना की मार्बल मशीनों के लिए कौन सी स्टील कास्टिंग सही है?

सामान्य मशीन पार्ट के लिए IS 1030 ग्रेड 280-520W, और ज़्यादा घिसाव व झटके वाले पार्ट के लिए IS 276 हाई मैंगनीज़ स्टील अक्सर चुनी जाती है।

Send your drawing for a technical review

Planning a new part or a second source for steel castings in Didwana-Kuchaman? Send your drawing for a technical review, or request a metallurgy consultation. Email info@alloynex.com with the drawing, grade, quantity and tests.

Which material for which Didwana-Kuchaman part? A decision matrix

Find your part in the left column and read across. This matrix is general guidance for marble, stone, salt and engineering units in Didwana, Kuchaman City, Makrana, Ladnun and Nawa; the grade on your drawing always comes first. Last updated: 15 Nov 2026

PartMain dutyUsual materialKey test to ask for
Gang-saw frame brackets, machine armsLoad plus weld repairIS 1030 280-520WTensile, chemistry per heat
Crusher jaws, liners, hammer tipsHeavy impact and abrasionIS 276 high manganese steelChemistry, water-toughening record
Block-cutter gearbox housingsStiffness and dampingIS 210 FG 260 grey ironHardness, tensile on test bar
Pulleys and wheel hubs under shockShock with machiningIS 1865 SG 500/7 or 400/15Elongation, nodularity
Salt pan pump casingsPressure and corrosionSG iron or alloy steel as per dutyHydro test, chemistry
General brackets, low loadLight load, weldableIS 1030 200-400W or 230-450WChemistry, hardness
Decision matrix: steel vs iron for Didwana-Kuchaman parts.

डीडवाना-कुचामन के खरीदार: पार्ट का काम (झटका, घिसाव या वेल्डिंग) लिखें और ड्रॉइंग info@alloynex.com पर भेजें।

Related: pipe fittings for Balotra and Barmer · grey iron castings for Deeg · ERW pipe for Bundi · SG iron pump castings for Phalodi.

Related: IS 1030 steel castings for Tonk, Niwai and Malpura, IS 276 high manganese steel for marble and stone machine wear parts, valve body castings: grades and tests and grey iron counterweight castings

Steel castings for Didwana-Kuchaman and Makrana: accept or reject on receipt?

Accept a steel casting only when four things agree: the grade results on the certificate meet the IS 1030 or IS 276 minimums, the heat number on the part matches the certificate, the key sizes sit inside the agreed ISO 8062-3 grade, and the working faces show no cracks or open porosity. The table gives clear accept and reject points for marble, salt and engineering units.

Last updated: 16 Nov 2026

Check on receiptAccept whenReject or hold when
Certificate vs gradeYield, tensile and elongation at or above the grade minimum, e.g. 280 / 520 MPa for 280-520WAny value below minimum, or values missing
Heat numberCast or stamped number matches the EN 10204 3.1 certificateNo marking, or number not on the certificate
Heat treatmentCondition on certificate matches drawing (normalized, N+T, solution treated for IS 276)Condition not stated or different
HardnessWithin the range on the drawingOutside range at machined or wear faces
Key dimensionsInside the ISO 8062-3 DCTG grade written on the drawingOutside grade on fitting or machined datums
SurfaceNo cracks; small surface marks on non-working faces onlyCracks, cold shuts, open porosity on working faces
Weld repairsOnly where agreed, with repair recordUnrecorded repairs on stressed areas

Fact: IS 1030 280-520W means at least 280 MPa yield and 520 MPa tensile strength, with chemistry limits for welding.

Related: marble machinery castings in Kishangarh and Makrana · FG 260 grey iron castings for Sikar · troubleshoot a failed steel casting

Send your drawing for a technical review and agree the acceptance points before the first lot: info@alloynex.com.

Related: tractor hub castings for Hanumangarh: SG iron grade table, cement plant wear-part castings for Beawar