SG Iron Castings for Bhilwara Buyers: Grades and Tests

SG iron castings for Bhilwara are best sourced from a foundry that makes them to your drawing and grade, and proves the metal with a heat-linked test certificate. Alloynex Foundries in Harmada, Jaipur, makes SG (ductile) iron castings to the buyer’s drawing and supplies buyers in Bhilwara and across Rajasthan. Name the IS 1865 grade on the drawing.

This guide explains which SG iron grade suits common Bhilwara parts, how SG 400/15 differs from SG 500/7, which tests to ask for, and what to send with your enquiry. It is written for OEM engineers, maintenance heads and purchase teams in textile, pump, valve, mining and general engineering units.

Why Bhilwara plants use SG iron castings

Bhilwara is known for its textile mills and a wide base of engineering, pump, valve and mineral-processing units. Many of their parts take shock, vibration or bending load: brackets, hubs, gear blanks, pulleys, levers, housings and valve bodies. Grey iron is good for damping and machining, but it is brittle under impact. SG iron keeps the castability of iron and adds strength and stretch, because its graphite forms as round nodules instead of flakes.

In simple words: if a grey iron part keeps cracking, an SG iron grade is often the first change to review with your foundry. Our guide on SG iron vs grey cast iron explains the choice in detail.

SG iron grades to IS 1865: quick reference

IS 1865 names SG iron grades by minimum tensile strength (MPa) and minimum elongation (%). The table shows the common grades with nearest EN 1563 names and typical uses.

IS 1865 gradeMin. tensile (MPa)Min. elongation (%)Nearest EN 1563Typical use
SG 350/2235022EN-GJS-350-22Parts that need very high toughness, low-temperature duty
SG 400/1840018EN-GJS-400-18Valve bodies, pressure parts, impact-loaded brackets
SG 400/1540015EN-GJS-400-15Textile machinery parts, pump and valve bodies, hubs
SG 450/1045010EN-GJS-450-10Housings and levers needing more strength
SG 500/75007EN-GJS-500-7Gear blanks, pulleys, wheels, general engineering
SG 600/36003EN-GJS-600-3Wear parts, crankshaft-type parts
SG 700/27002EN-GJS-700-2High strength and wear duty
Values are minimums on separately cast test bars as per IS 1865. Always confirm the grade and edition on your drawing.

SG 500/7 vs SG 400/15: which one should you choose?

SG 400/15 is mostly ferritic. It is softer, easier to machine and stretches up to 15% before breaking, so it handles shock and sudden load well. SG 500/7 has more pearlite in its matrix. It is stronger and wears better, but it stretches only about 7%. Choose 400/15 for parts that must not crack under impact, and 500/7 for parts that must carry more load or resist wear.

PointSG 400/15SG 500/7
MatrixMostly ferriteFerrite and pearlite
StrengthLower (400 MPa min.)Higher (500 MPa min.)
Elongation15% min.7% min.
Impact and shockBetterLower
Wear lifeLowerBetter
MachiningEasierSlightly harder
Nearest ASTM A53660-40-18 / 65-45-12 familyBetween 65-45-12 and 80-55-06

How to source SG iron castings in Bhilwara: 6 steps

  1. Send the drawing with grade (for example IS 1865 SG 500/7), machined faces and tolerances.
  2. State weight and lot size per part and the yearly need, so the foundry can plan pattern and moulding.
  3. List the tests: chemistry, tensile and elongation, hardness, nodularity, dimensional check, and any NDT.
  4. Name the certificate, usually EN 10204 3.1, linked to the heat number. See our EN 10204 test certificates guide.
  5. Agree machining stock on each face before the pattern is made. Our machining allowance guide gives typical starting values.
  6. Approve a first-off sample against the drawing before lot supply starts.

Tests and checks for SG iron castings

A sound SG iron casting is proven by numbers, not by looks. The key checks are below.

CheckWhat it proves
Chemical analysisCarbon, silicon, manganese, sulphur, phosphorus and residual magnesium are within limits
Tensile and elongation testThe grade minimums are met on the test bar
Hardness (BHN)Matrix and machinability are as expected
Microstructure / nodularityGraphite is round enough for the grade
Dimensional inspectionPart matches the drawing and machining stock
Heat number markingEvery part can be traced to its certificate

Where the drawing asks for it, SG iron may also be annealed or normalised to reach the required grade. Read more in our guide to heat treatment of castings.

भीलवाड़ा के खरीदारों के लिए एसजी आयरन कास्टिंग

एसजी आयरन (डक्टाइल आयरन) में ग्रेफाइट गोल गांठों के रूप में होता है, इसलिए यह ग्रे आयरन से ज़्यादा मज़बूत और कम भंगुर होता है। भीलवाड़ा की टेक्सटाइल मशीनरी, पंप, वाल्व और इंजीनियरिंग यूनिट्स में ब्रैकेट, हब, पुली, गियर ब्लैंक और वाल्व बॉडी के लिए IS 1865 के SG 400/15 और SG 500/7 ग्रेड सबसे ज़्यादा उपयोग होते हैं।

ऑर्डर देते समय ड्रॉइंग, ग्रेड, वज़न, मात्रा, ज़रूरी टेस्ट और EN 10204 3.1 सर्टिफिकेट ज़रूर लिखें। अपनी ड्रॉइंग तकनीकी समीक्षा के लिए info@alloynex.com पर भेजें।

Why buyers work with Alloynex for SG iron castings

  • Castings made to the buyer’s drawing and material grade
  • Testing to the grade, with documented results
  • ISO 9001, ISO 14001 and ISO 45001 management systems
  • Grey iron, SG iron, steel and alloy steel castings from one Jaipur source, plus rolled products, tubes, pipes and fittings
  • Supply to Bhilwara, Chittorgarh, Ajmer, Udaipur, Jodhpur, Kota and the rest of Rajasthan, across India and for export

See all our casting services, including grey iron castings in Jaipur, or read the castings buyer guide for Rajasthan.

FAQs

Who makes SG iron castings for Bhilwara buyers?

Alloynex Foundries in Harmada, Jaipur, makes SG (ductile) iron castings to customer drawings for buyers in Bhilwara and across Rajasthan. Send your drawing to info@alloynex.com.

Which SG iron grade is common for textile machinery parts?

SG 400/15 and SG 500/7 to IS 1865 are the most common choices. Use 400/15 where the part takes shock or must not crack, and 500/7 where it needs more strength and wear life.

What tests should come with SG iron castings?

Ask for chemistry, tensile strength and elongation on a test bar, hardness, a nodularity check from the microstructure, dimensional inspection and an EN 10204 3.1 certificate linked by heat number.

Is SG iron the same as ductile iron?

Yes. SG (spheroidal graphite) iron, ductile iron and nodular iron are three names for the same family. The graphite is round, which gives far more strength and stretch than grey iron.

भीलवाड़ा में एसजी आयरन कास्टिंग कौन बनाता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार एसजी (डक्टाइल) आयरन कास्टिंग बनाती है और भीलवाड़ा व पूरे राजस्थान के खरीदारों को सप्लाई करती है। ड्रॉइंग info@alloynex.com पर भेजें।

एसजी 400/15 और 500/7 में क्या अंतर है?

400/15 की टेन्साइल स्ट्रेंथ कम से कम 400 MPa और एलॉन्गेशन 15% है, इसलिए यह झटके सहने वाले पार्ट के लिए अच्छा है। 500/7 ज़्यादा मज़बूत (500 MPa) है पर एलॉन्गेशन 7% है।

Send your drawing for a technical review

Share your drawing, SG iron grade, weight, quantity and required tests at info@alloynex.com. Our engineers review every enquiry before we reply. You can also request a metallurgy consultation through our contact page.

Last updated: 14 November 2026

Further reading: all nine IS 1865 grades with proof stress values, FG 200 vs FG 260 vs SG 500/7 and IS 1239 pipe classes and pipe fittings.

Related: shrinkage porosity in SG iron castings: causes and prevention

Related: castings supplier for Tonk, Newai, Malpura and Deoli

Who makes SG iron castings for buyers in Sikar and Churu?

Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for buyers in Sikar, Churu and Jhunjhunu. Common IS 1865 grades are SG 400/15 (min. 400 MPa, 15% elongation) and SG 500/7 (min. 500 MPa, 7%).

SG iron spec table for Sikar and Churu parts

IS 1865 gradeMin. tensile (MPa)Min. elongation (%)Typical hardness (HB, approx.)Typical parts
SG 400/1540015130 to 180Pump and valve parts, brackets under shock
SG 450/1045010160 to 210Pipe fittings, housings, hubs
SG 500/75007170 to 230Gears, pulleys, farm machinery parts
SG 600/36003190 to 270Wear and high-strength parts

How to source SG iron castings in Sikar and Churu

  1. Name the IS 1865 grade on the drawing.
  2. Mark the heaviest section and machined faces.
  3. Ask for tensile and elongation on a test bar from the same melt.
  4. Ask for nodularity and hardness checks.
  5. Ask for an EN 10204 3.1 certificate by heat number.
  6. Send the drawing to info@alloynex.com for a technical review.

SG iron vs grey iron for pump and farm machinery parts

PointSG iron (SG 500/7)Grey iron (FG 260)
Min. tensile500 MPa260 MPa
Elongation7% minimumVery low
Shock loadHandles it wellMay crack
DampingLowerVery good

More: SG iron vs grey cast iron and ductile iron castings and IS 1865 grades.

Does Alloynex supply SG iron castings to Sikar?

Yes. Alloynex makes SG iron castings to drawing for buyers in Sikar, Churu, Jhunjhunu and the rest of Rajasthan.

Which SG grade suits borewell pump parts?

SG 400/15 or SG 450/10 suit parts that take shock and pressure. SG 500/7 suits parts that need more strength and wear life.

सीकर और चूरू में एसजी आयरन कास्टिंग कौन बनाता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार एसजी आयरन कास्टिंग बनाकर सीकर, चूरू और झुंझुनू के खरीदारों को सप्लाई करती है। ड्रॉइंग पर IS 1865 ग्रेड लिखें। ड्रॉइंग info@alloynex.com पर भेजें।

Last updated: 13 November 2026

Related: ERW and seamless pipes for Bhilwara and Ajmer plants

Who supplies grey and SG iron castings to Nagaur and Sirohi buyers?

Alloynex Foundries in Harmada, Jaipur, makes grey iron and SG iron castings to the buyer’s drawing for buyers in Nagaur, Makrana, Merta, Sirohi, Pindwara and Abu Road. Name the IS 210 or IS 1865 grade on the drawing. Every order starts with a drawing review. Ask for test results linked to the heat number and name the certificate type, for example EN 10204 3.1.

Grade decision matrix for Nagaur and Sirohi parts

Part and working conditionGrade to review firstWhyProof to ask for
Machine bases, covers and frames in marble and stone-cutting units (Makrana, Pindwara)Grey iron IS 210 FG 200 or FG 260Good damping of vibration, easy to machine, stable shapeChemistry, hardness, tensile test bar
Pump casings and pulleys for farm and water lines (Nagaur, Merta)Grey iron IS 210 FG 260Steady pressure, wear on the bore, low shockHardness, pressure test if specified, dimensions
Brackets, hubs and arms that take shock (crushers, cement and mineral units in Sirohi)SG iron IS 1865 SG 400/15High elongation, resists cracking under impactTensile and elongation, nodularity check
Gear blanks and wear parts that need strengthSG iron IS 1865 SG 500/7Higher strength and wear life than 400/15Tensile, hardness, nodularity, microstructure
Grey iron part that keeps cracking in serviceMove to SG 400/15 or SG 500/7Round graphite stops cracks spreadingReview drawing and load with the foundry

नागौर और सिरोही के खरीदार ग्रे और एसजी आयरन कास्टिंग कहाँ से लें?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, नागौर, मकराना, मेड़ता, सिरोही, पिंडवाड़ा और आबू रोड के खरीदारों के लिए ड्रॉइंग के अनुसार ग्रे आयरन और एसजी आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 210 या IS 1865 ग्रेड लिखें। मार्बल और स्टोन मशीनरी के बेस के लिए FG 260 और झटका सहने वाले पार्ट के लिए SG 400/15 अक्सर पहली पसंद होती है। अपनी ड्रॉइंग, ग्रेड, मात्रा और ज़रूरी टेस्ट info@alloynex.com पर भेजें।

Related guides for Nagaur and Sirohi buyers:

Send your drawing for a technical review at info@alloynex.com.

SG and grey iron castings for Nagaur and Sirohi: grade property table and quick facts

For Nagaur and Sirohi parts, Alloynex Foundries, Harmada, Jaipur, makes SG iron and grey iron castings to your drawing. Name the grade on the drawing, for example IS 1865 SG 500/7 or IS 210 FG 260. Ask for chemistry and tensile results for each heat, and nodularity for SG iron.

Quick-facts box

ItemDetail
MaterialsGrey iron IS 210, SG (ductile) iron IS 1865, steel and alloy steel castings
Made toCustomer drawing, grade and machining notes
Checks to ask forChemistry, tensile test bar, hardness, nodularity (SG iron), dimensions
Documents to ask forHeat-linked test certificate; EN 10204 3.1 if needed
SystemsISO 9001, ISO 14001, ISO 45001
Towns servedNagaur, Makrana, Merta, Kuchaman, Didwana, Sirohi, Pindwara, Abu Road
Enquiriesinfo@alloynex.com

Grade and property table (minimum values from the standards)

GradeStandardMin. tensile (MPa)Min. 0.2% proof (MPa)Min. elongation (%)Typical hardness (HB, guide)
FG 200IS 210200––about 160-220
FG 260IS 210260––about 180-230
SG 400/15IS 186540025015about 130-180
SG 500/7IS 18655003207about 170-230

Hardness ranges are typical guide values, not acceptance limits. The values on your order and the standard edition always govern.

District supply table: common parts by town

TownTypical industryCommon cast partsGrade usually reviewed first
Makrana (marble belt)Marble cutting and polishingMachine bases, wheel hubs, coversFG 260 for bases; SG 400/15 for hubs
Nagaur, MertaFarm pumps, water lines, agro unitsPump casings, impellers, pulleysFG 260 or SG 400/15
Kuchaman, DidwanaSalt and mineral processingWear plates, brackets, housingsSG 500/7 or alloy steel as per wear
Pindwara, SirohiCement and stone crushingCrusher arms, brackets, gear blanksSG 400/15 or SG 500/7
Abu RoadEngineering and repair shopsHousings, flanges, coversFG 200 or FG 260

Glossary

  • Nodularity: share of round graphite in SG iron; higher nodularity gives more strength and elongation.
  • Proof stress: stress at 0.2% permanent stretch, used as yield for SG iron.
  • FG / SG: flake graphite (grey) iron and spheroidal graphite (ductile) iron.
  • Test bar: sample poured from the same heat for the tensile test.

नागौर और सिरोही के लिए SG 400/15 या SG 500/7 कौन सा लें?

झटका सहने वाले हब, ब्रैकेट और क्रशर आर्म के लिए SG 400/15 (कम से कम 400 MPa, 15% एलॉन्गेशन) चुनें। ज़्यादा मज़बूती और घिसाव वाले गियर ब्लैंक के लिए SG 500/7 (कम से कम 500 MPa, 7% एलॉन्गेशन) चुनें। ड्रॉइंग info@alloynex.com पर भेजें।

Related: IS 210 grey iron grades, all IS 1865 grades, how to read a 3.1 certificate. Send your drawing for a technical review or request a metallurgy consultation.

Last updated: 14 November 2026

Who supplies SG iron castings to buyers in Chittorgarh?

Last updated: 14 November 2026

Short answer: Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for cement, mineral processing and engineering units in Chittorgarh, Nimbahera and Begun. Most parts are ordered in IS 1865 grade SG 400/15, SG 450/10 or SG 500/7. Send the drawing with the grade, and name the test certificates you need.

IS 1865 SG iron grades for Chittorgarh parts (general education)

IS 1865 gradeMin. tensile (MPa)Min. 0.2% proof (MPa)Min. elongation (%)Typical hardness (HB, guide)Typical Chittorgarh-area parts
SG 350/2235022022up to 160Parts that need high toughness at low temperature
SG 400/1540025015135 to 180Pump casings, valve bodies, water-line parts
SG 450/1045031010160 to 210Gearbox housings, bearing housings
SG 500/75003207170 to 230Conveyor pulleys, hubs, crusher frames
SG 600/36003703190 to 270Gears, sprockets, wear sleeves
SG 700/27004202225 to 305High-strength wear parts

Strength and elongation are minimums on test bars as per IS 1865. Hardness is a guide only. SG iron and ductile iron are the same material.

How a Chittorgarh buyer should order SG iron castings: 6 steps

  1. Write the grade on the drawing, for example “SG 500/7 to IS 1865”.
  2. Mark machined faces and the machining allowance you need.
  3. Say if the part sees impact or low temperature. If yes, choose SG 400/15 or SG 350/22.
  4. List the tests: chemistry, tensile, hardness and microstructure (nodularity).
  5. Ask for the certificate type, for example EN 10204 3.1.
  6. Approve samples first, then share a lot schedule for your plant shutdowns.

SG 500/7 vs grey iron FG 260 vs cast steel for cement-plant parts

PointSG iron SG 500/7Grey iron FG 260Cast steel IS 1030 280-520W
Min. tensile (MPa)500260520
ElongationAbout 7% min.Almost noneAbout 18% min.
Impact and shockGoodPoorVery good
Vibration dampingMediumHighLow
MachiningEasyEasiestFair
Good forPulleys, hubs, housingsBases, covers, framesHeavy-shock and welded parts

Quick facts for Chittorgarh SG iron buyers

  • SG 500/7 means minimum tensile strength 500 MPa and minimum elongation 7%.
  • SG iron gets its strength from round (spheroidal) graphite nodules.
  • For shock loads, SG iron is a safer choice than grey iron.

Is SG 500/7 good for conveyor pulleys and hubs?

Yes. SG 500/7 gives a good mix of strength and toughness for pulleys, hubs and frames in cement and mineral plants. If the part takes heavy shock, ask about SG 450/10 or SG 400/15.

Does Alloynex deliver SG iron castings to Nimbahera and Begun?

Yes. Alloynex supplies castings to buyers across Rajasthan, including Chittorgarh, Nimbahera, Begun and nearby industrial areas. Send your drawing to info@alloynex.com to start.

चित्तौड़गढ़ में एसजी आयरन कास्टिंग कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, चित्तौड़गढ़, निम्बाहेड़ा और बेगूं के सीमेंट और इंजीनियरिंग यूनिट के लिए ड्रॉइंग के अनुसार एसजी (डक्टाइल) आयरन कास्टिंग बनाती है। आम ग्रेड IS 1865 के SG 400/15, SG 450/10 और SG 500/7 हैं।

सीमेंट प्लांट के पार्ट के लिए कौन सा एसजी ग्रेड लें?

पुली, हब और हाउसिंग के लिए SG 500/7 लें। झटके वाले पार्ट के लिए SG 400/15 लें। गियर और घिसाई वाले पार्ट के लिए SG 600/3 देखें।

Send your drawing for a technical review, or request a metallurgy consultation. Email info@alloynex.com with the drawing, grade, quantity per lot and the tests you need.

Related: SG 500/7 or grey iron for farm machinery castings in Hanumangarh and Sri Ganganagar

Who supplies SG iron castings in Beawar and Ajmer?

Short answer: Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for buyers in Beawar, Ajmer, Kishangarh, Nasirabad, Kekri and Bijainagar. Common grades are IS 1865 SG 400/15 for shock-loaded parts and SG 500/7 for strength and wear. Ask for chemistry, tensile strength, elongation and nodularity results for each heat.

Beawar and Ajmer have cement plants, mineral grinding units (feldspar, quartz and soapstone), marble and granite cutting units in Kishangarh, and pump and engineering workshops. Their parts take shock, vibration and wear, so the SG grade must match the job.

IS 1865 SG iron spec table for Beawar and Ajmer parts

IS 1865 gradeMin. tensile (MPa)Min. 0.2% proof stress (MPa)Min. elongation (%)Typical hardness (HB, approx.)Typical Beawar and Ajmer parts
SG 400/1540025015135 to 180Crusher brackets, arms, valve bodies under shock
SG 450/1045031010160 to 210Pump casings, pipe fittings, hubs
SG 500/75003207170 to 230Pulleys, gear blanks, grinding mill housings
SG 600/36003703190 to 270Wear sleeves, sprockets, liners with low shock
SG 700/27004202225 to 305High-strength wear parts
Tensile, proof stress and elongation are minimum values on separately cast test bars as per IS 1865. Hardness is typical guidance only.

Order data sheet: what to write for an SG iron casting

FieldWhat to writeExample
Material and standardGrade with the standardSG 500/7 to IS 1865
DrawingLatest revision with machined faces markedRev C, faces A and B machined
Section sizeThinnest and heaviest wall8 mm to 40 mm
TestsChemistry, tensile, elongation, hardness, nodularityPer heat
CertificateType of inspection documentEN 10204 3.1 by heat number
Quantity and scheduleLot size and call-offSample lot, then monthly

How to choose and order SG iron castings in Beawar and Ajmer

  1. Name the main load on the part: shock, steady load, wear or vibration.
  2. Pick the grade from the table: SG 400/15 for shock, SG 500/7 for general strength, SG 600/3 for wear.
  3. Write the grade and standard on the drawing, for example “SG 500/7 to IS 1865”.
  4. Mark machined faces, datums and machining allowance.
  5. List the tests and the EN 10204 certificate type you need.
  6. Approve a sample lot, then share the monthly or shutdown schedule.
  7. Email the drawing to info@alloynex.com for a technical review.

SG 400/15 vs SG 500/7 vs grey iron FG 260 for Beawar plant parts

PointSG 400/15SG 500/7Grey iron FG 260 (IS 210)
Min. tensile (MPa)400500260
Min. elongation15%7%Very low
Shock and impactBest of the threeGoodPoor, may crack
Wear lifeFairGoodFair
Vibration dampingMediumMediumVery good
Typical useCrusher arms, brackets, valve bodiesPulleys, gear blanks, mill housingsMachine bases, covers

Quick facts for Beawar and Ajmer buyers

  • IS 1865 is the Indian standard for SG (spheroidal graphite) iron castings; EN 1563 is the European standard.
  • SG 500/7 means minimum 500 MPa tensile strength and minimum 7% elongation.
  • Nodularity shows how round the graphite is; poor nodularity lowers strength and elongation.
  • Alloynex Foundries, Harmada, Jaipur, supplies SG iron castings to Beawar, Ajmer, Kishangarh, Nasirabad, Kekri and Bijainagar and works under ISO 9001, ISO 14001 and ISO 45001 systems.

FAQs: SG iron castings in Beawar and Ajmer

Who supplies SG iron castings in Beawar and Ajmer?

Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to the buyer’s drawing for buyers in Beawar, Ajmer, Kishangarh, Nasirabad and Bijainagar. Name the IS 1865 grade (for example SG 400/15 or SG 500/7) on the drawing.

Which SG iron grade suits crusher and grinding mill parts in Beawar?

SG 400/15 suits brackets, hubs and arms that take shock. SG 500/7 suits pulleys, gear blanks and housings that need more strength and wear life. SG 600/3 is for wear parts with little shock. Confirm the grade with a drawing review.

What does SG 500/7 mean on a drawing?

SG 500/7 to IS 1865 means a minimum tensile strength of 500 MPa and a minimum elongation of 7 percent, measured on a test bar cast from the same melt.

ब्यावर और अजमेर में एसजी आयरन कास्टिंग कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ब्यावर, अजमेर, किशनगढ़ और नसीराबाद के खरीदारों के लिए ड्रॉइंग के अनुसार एसजी आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 1865 ग्रेड (जैसे SG 400/15 या SG 500/7) लिखें। ड्रॉइंग, ग्रेड और मात्रा info@alloynex.com पर भेजें।

Related: SG iron vs grey cast iron, all IS 1865 grades with proof stress, EN 10204 test certificates.

Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com.

Last updated: 15 November 2026

Related: rolled steel products for Bhilwara buyers: IS 2062 and IS 1079 grades, SG iron castings for Boranada, Jodhpur, pipe fittings for Basni, Jodhpur and ERW pipes for Bharatpur

Related: SG iron castings for Beawar: IS 1865 grade table, alloy steel castings for Chittorgarh cement plants and alloy steel castings for cement plants in Chittorgarh and Nimbahera.

Which grey iron grade suits counterweight castings for Bhilwara machines?

Answer: Counterweight castings for Bhilwara textile, pump and material-handling machines are usually ordered in grey cast iron to IS 210, grade FG 150 or FG 200, because the job needs mass and compact size, not high strength. Grey iron is dense (about 7.1 g/cm³), casts complex shapes in one piece and damps vibration. Alloynex Foundries, Jaipur, reviews counterweight drawings at info@alloynex.com.

Counterweight casting spec sheet

ItemTypical choiceWhy
MaterialGrey iron to IS 210, FG 150 or FG 200Enough strength for a static mass; easy to cast and machine
Density for weight calculationAbout 7.0 to 7.2 g/cm³Use about 7.1 for early weight estimates; steel is about 7.85
Weight toleranceAgreed on the drawing, for example ± a set percentageBalancing needs a known mass, not just size
SoundnessNo large shrinkage cavitiesHidden voids reduce weight and shift the centre of gravity
Machined facesMounting face and bolt holes onlyKeeps cost of ownership and lead time down
FinishShot blasted and primed or paintedRust control on the shop floor

How to specify a counterweight casting: 5 steps

  1. State the target mass and the allowed weight band, and mark the centre of gravity if it matters.
  2. Name the material: grey iron to IS 210, FG 150 or FG 200 (FG 260 only if the part also carries load).
  3. Mark only the faces that must be machined, and add an ISO 8062-3 tolerance note for the rest.
  4. Ask for weight check on each piece or on a sample plan, plus hardness and chemistry on the heat.
  5. State finish and marking (part number, heat number) and send the drawing for review.

Grey iron vs SG iron vs fabricated steel for counterweights

PointGrey iron casting (IS 210)SG iron casting (IS 1865)Fabricated steel plate
DensityAbout 7.1 g/cm³About 7.1 g/cm³About 7.85 g/cm³
Complex shape in one pieceYesYesNeeds cutting and welding
Shock resistanceLowHighHigh
Best forStatic counterweights, balance massesCounterweights that also take impact or bolt loadSimple flat stacks, one-off jobs

FAQs: counterweight castings for Bhilwara

Why are counterweights made of grey iron and not steel?
A counterweight needs mass and shape more than strength. Grey iron casts complex shapes in one piece, machines easily and damps vibration, so it suits most static counterweights.

How is the weight of a counterweight casting controlled?
The drawing states a target mass and a weight band. The foundry checks weight on each piece or on an agreed sample plan, and sound feeding avoids hidden shrinkage voids.

काउंटरवेट कास्टिंग के लिए कौन सा ग्रे आयरन ग्रेड लें?
ज़्यादातर स्थिर काउंटरवेट के लिए IS 210 का FG 150 या FG 200 ग्रेड काफ़ी है। अगर पार्ट पर लोड या झटका भी आता है, तो FG 260 या SG आयरन पर विचार करें।

भीलवाड़ा से काउंटरवेट कास्टिंग की ड्रॉइंग कहाँ भेजें?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर को info@alloynex.com पर ड्रॉइंग, लक्ष्य वज़न, वज़न की सीमा और मात्रा भेजें। टीम तकनीकी समीक्षा करके जवाब देती है।

Read next: IS 210 FG 200 vs FG 260 vs FG 300, SG iron vs grey cast iron and ISO 8062 casting tolerances. Send your drawing for a technical review to info@alloynex.com.

Last updated: 15 November 2026

SG iron castings for Bhilwara: who checks what (responsibility matrix)

For IS 1865 SG iron castings, quality is shared: the buyer fixes the grade and acceptance rules, the foundry proves chemistry, nodularity and tensile results per heat, and the buyer’s receiving team checks dimensions, marking and the certificate. Writing these roles down before the first order avoids most disputes with Bhilwara textile, pump and valve parts.

Last updated: 16 Nov 2026

TaskBuyer designFoundryBuyer receiving / QA
Grade on drawing, e.g. IS 1865 SG 500/7ResponsibleConsulted at reviewInformed
Tolerance and machining allowance (ISO 8062-3)ResponsibleConsultedInformed
Chemistry and magnesium treatment per heatInformedResponsibleReviews certificate
Nodularity and microstructureSets minimumResponsible, reportsReviews report
Tensile, proof stress and elongation on test barSets gradeResponsible, reportsReviews; may witness
First article dimensional reportApprovesResponsibleChecks key sizes
Heat number marking and EN 10204 3.1 certificateNames certificate typeResponsibleMatches heat number to certificate
Non-conformance and corrective actionDecides use-as-is or rejectRoot cause and fixRecords and tracks

Fact: IS 1865 SG 400/15 means at least 400 MPa tensile strength and 15% elongation; SG 500/7 means 500 MPa and 7%.

Related: FG 260 grey iron castings for Sikar buyers · marble machinery castings in Kishangarh · textile machinery castings in Bhilwara

Send your drawing for a technical review and the matrix can be agreed with the first order: info@alloynex.com.

Related: tractor hub castings for Hanumangarh: SG iron grade table