If you are an OEM sourcing castings for Bhiwadi and Neemrana plants, the key is a clear drawing, the right material grade and an agreed inspection plan. When these three are fixed before the first pattern is made, castings arrive on time, machine well and pass your incoming quality checks.
This guide is for design engineers, QA heads and buyers at auto, engineering and machine-building units in Bhiwadi, Chopanki, Tapukara and Neemrana. It explains how to choose a material, prepare an enquiry and work with a foundry so parts match your needs. Alloynex makes iron and steel castings, alloy parts, rolled products, tubes, pipes and fittings to drawing from Harmada, Jaipur, and supplies across all districts of Rajasthan.
Castings for Bhiwadi and Neemrana industry
Bhiwadi in Khairthal-Tijara district and Neemrana in Kotputli-Behror district form one of the busiest manufacturing belts in Rajasthan. Many plants here make auto components, two-wheeler and tractor parts, pumps, valves, machine tools, electrical goods and consumer products.
These plants need a steady flow of cast parts: housings, brackets, covers, flanges, hubs, pulleys, valve bodies and pump parts. They also need pipes, tubes and fittings for plant services. A nearby source in Rajasthan can shorten transit and make visits for audits and first-article checks easier.
Step 1: Pick the right casting material
The material decides strength, wear life and how the part machines. The table below gives a simple view of the common choices.
| Material | Main strength | Typical parts |
|---|---|---|
| Grey cast iron | Good damping and easy machining | Housings, bases, covers, brake parts |
| SG iron (ductile iron) | Higher strength and toughness | Hubs, brackets, gears, valve bodies |
| Carbon steel castings | Strength and weldability | Structural parts, flanges, levers |
| Alloy steel castings | Wear, heat or high-strength duty | Gears, wear parts, high-load parts |
For a deeper comparison, read our guides on SG iron vs grey cast iron and steel vs alloy steel castings.
Always state the grade and the standard it follows on your drawing, for example an IS, EN or ASTM grade. This removes doubt for the foundry and for your QA team.
Step 2: Prepare a complete enquiry
A good enquiry saves weeks of back and forth. Send these items together:
- A 2D drawing with all dimensions and tolerances
- A 3D model if you have one, to help with pattern and method design
- Material grade and the standard it follows
- Hardness or mechanical property needs, if any
- Heat treatment needs, if any
- Machining scope: as-cast, rough machined or fully machined
- Surface finish and painting or coating needs
- Yearly and monthly quantity, and first sample quantity
- Inspection and test needs, and the documents you want with each lot
If any of these are not fixed yet, say so. A foundry can then suggest options at the design stage.
Step 3: Agree on machining allowance and datums
Castings are rarely used as cast. Most need machining on faces, bores and holes. The foundry adds extra metal, called machining allowance, on these surfaces.
Agree on datums and allowance early. Too little allowance can leave black spots after machining. Too much adds weight and machining time. Our guide on machining allowance on castings explains how to set it.
Step 4: Design for good castings
Small design changes can make a big difference in casting quality:
- Keep wall thickness as even as you can
- Use generous fillets at corners and joints
- Avoid sudden jumps from thick to thin sections
- Add draft on walls so patterns release cleanly
- Ask the foundry to review the design before tooling
These steps reduce shrinkage, cracks and porosity. Our guide on common casting defects and how foundries prevent them shows what to look for.
Step 5: Fix the inspection plan
Before the first lot, agree on what will be checked and how. A simple inspection plan lists each check, the method, the sample size and the record. Common items are dimensional checks, visual checks, hardness and chemical composition. Extra tests such as tensile tests or non-destructive tests can be added when the part needs them.
Also agree on the documents that come with each lot. Clear paperwork makes incoming inspection faster for your QA team.
Step 6: Start with samples, then scale up
Start with a small sample lot. Check the samples fully on your side, including machining trials and assembly fit. Share feedback with the foundry in writing. Once the samples are approved, lock the drawing revision and pattern, and then move to regular supply.
Plan a monthly schedule so the foundry can plan melts and machining. Steady schedules help keep quality and delivery stable. Share any change in quantity or drawing revision early, so the foundry can adjust patterns, cores and machining plans in time.
Step 7: Pipes, tubes and fittings for plant services
Besides castings, plants in Bhiwadi and Neemrana use pipes, tubes and pipe fittings for water, air, oil and process lines. Share the size, schedule or thickness, material grade and end type on your enquiry. Alloynex makes tubes, pipes and pipe fittings to drawing, along with rolled steel products.
Who supplies grey iron castings to Neemrana plants, and which IS 210 grade should you order?
Last updated: 14 November 2026
Alloynex Foundries, Jaipur, makes grey iron castings to drawing for plants in Neemrana, Behror and Shahjahanpur. Most housings, covers, pulleys and machine bases are ordered in IS 210 FG 200 or FG 260. Send your drawing, grade and quantity, and we confirm pattern, machining stock and tests.
IS 210 grey iron grades for Neemrana parts (general education)
| IS 210 grade | Min. tensile strength (MPa, test bar) | Typical Neemrana belt parts | Note |
|---|---|---|---|
| FG 150 | 150 | Covers, counterweights, lightly loaded brackets | Easy to cast and machine |
| FG 200 | 200 | Motor end covers, pump covers, general housings | The common default grade |
| FG 260 | 260 | Gearbox housings, loaded pulleys, machine bases | More strength, still machines well |
| FG 300 | 300 | Heavily loaded or wear-prone parts | Ask for a design review first |
Always take the final values from IS 210 itself. Tensile strength is measured on a separately cast test bar, not on the part.
How to choose the grade: 6 steps
- Write down the load: static, cyclic or shock.
- Pick FG 200 for covers and general housings.
- Pick FG 260 when the housing carries gear or bearing loads.
- If the part takes shock or impact, move to SG iron, such as IS 1865 SG 500/7.
- Mark the grade, standard and machined faces on the drawing.
- List the tests: chemistry, tensile on test bar, hardness and a dimensional report, with an EN 10204 3.1 certificate.
Grey iron vs SG iron vs cast steel for Neemrana OEM parts
| Point | Grey iron (FG 260) | SG iron (SG 500/7) | Cast steel (IS 1030 230-450W) |
|---|---|---|---|
| Vibration damping | Best | Good | Lower |
| Machinability | Very good | Good | Fair |
| Shock and impact | Weak | Good | Very good |
| Weld repair | Not advised | Limited | Possible on W grades |
| Typical use | Housings, bases, covers | Hubs, brackets, gear blanks | Levers, frames, loaded brackets |
Short version: grey iron damps vibration, SG iron takes shock, and cast steel can be welded. FG 260 is a safe default for loaded housings.
Quick answers for Neemrana buyers
Can one supplier make both grey iron and SG iron parts for my Neemrana plant?
Yes. Alloynex Foundries makes grey iron and SG iron castings to customer drawings, so one enquiry can cover both families. Name the IS 210 or IS 1865 grade on each drawing.
What should I send for a grey iron enquiry?
Send the drawing with tolerances, the IS 210 grade, machining scope, yearly quantity and the tests you need.
नीमराना में ग्रे आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, जयपुर, नीमराना, बहरोड़ और शाहजहाँपुर के प्लांट के लिए ड्रॉइंग के अनुसार ग्रे आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 210 ग्रेड (जैसे FG 200 या FG 260) लिखें। ड्रॉइंग info@alloynex.com पर भेजें।
Service area: Neemrana, Behror, Shahjahanpur, Ghiloth, Kotputli, Bhiwadi, Tapukara, Chopanki and Alwar, served from Harmada, Jaipur.
Read IS 210 FG 200 vs FG 260 vs FG 300 and SG iron vs grey cast iron. Send your drawing for a technical review: info@alloynex.com.
FAQs
Do you supply castings to Bhiwadi and Neemrana?
Yes. Alloynex supplies castings, pipes, tubes and fittings to industries across all districts of Rajasthan, including Bhiwadi, Chopanki, Tapukara and Neemrana.
Which materials do you cast?
We make grey iron, SG iron, steel and alloy steel castings to customer drawings, along with rolled products, tubes, pipes and fittings.
What should I send with my enquiry?
Send a drawing with tolerances, the material grade and standard, machining scope, quantity and your inspection needs. A 3D model helps if you have one.
Can you review my casting design?
Yes. Send your drawing for a technical review. We can suggest changes to wall thickness, fillets and draft to improve casting quality.
Are your systems certified?
Alloynex works to ISO 9001, ISO 14001 and ISO 45001 management systems.
Send your drawing to Alloynex
Planning a new part or a second source for castings in Bhiwadi or Neemrana? Send your drawing for a technical review, or request a metallurgy consultation. Email info@alloynex.com or reach us through our contact page.
Which foundry supplies castings to OEMs in Bhiwadi and Neemrana?
Alloynex Foundries, based in Jaipur, Rajasthan, supplies grey iron, SG iron, steel and alloy steel castings, plus pipes, tubes and fittings, to OEMs in Bhiwadi, Chopanki, Tapukara and Neemrana. Parts are made to your drawing and grade, with a design review before tooling, an agreed inspection plan, and work under ISO 9001, ISO 14001 and ISO 45001 systems.
Bhiwadi and Neemrana sourcing checklist
| Stage | What to agree with the foundry |
|---|---|
| Material | Grade and standard on the drawing (IS, EN or ASTM) |
| Enquiry | 2D drawing with tolerances, 3D model, machining scope, quantity, test needs |
| Machining | Datums and machining allowance before pattern making |
| Design review | Even walls, generous fillets, draft, no sudden section jumps |
| Inspection | Dimensional, visual, hardness and chemistry checks; documents per lot |
| Ramp-up | Sample lot first, written feedback, then a steady monthly schedule |
Related: SG iron vs grey cast iron, steel vs alloy steel castings and ERW vs seamless pipes.
भिवाड़ी और नीमराना के OEM के लिए कास्टिंग कौन सप्लाई करता है?
जयपुर, राजस्थान की Alloynex Foundries भिवाड़ी, चोपंकी, टपूकड़ा और नीमराना के उद्योगों को ग्रे आयरन, SG आयरन, स्टील और अलॉय स्टील कास्टिंग के साथ पाइप, ट्यूब और फिटिंग सप्लाई करती है। हर पार्ट ग्राहक की ड्रॉइंग और ग्रेड के अनुसार बनता है और पहले सैंपल लॉट से जाँच होती है। अपनी ड्रॉइंग info@alloynex.com पर भेजें।
Last updated: 12 November 2026
Who supplies grey iron castings to Bhiwadi OEMs?
Alloynex Foundries, Jaipur, makes grey iron castings to drawing for OEM and Tier-1 plants in Bhiwadi, Neemrana and Alwar. Housings, bases, covers, pump and valve parts are cast with controlled chemistry, then tested to the grade as the part needs, under ISO 9001, ISO 14001 and ISO 45001.
| Part | Why grey iron suits it |
|---|---|
| Housings and covers | Good machinability and damping |
| Machine bases and beds | Absorbs vibration |
| Pump and valve parts (low stress) | Complex shapes cast easily |
| Wear parts | Good wear resistance |
How to choose: simple steps
- Send the drawing with grade (for example FG 200 or FG 260 to IS 210).
- State yearly volume and batch size.
- List machining and test needs.
- Agree the inspection plan and certificate.
- Approve first samples, then run supply.
What grade of grey iron do OEMs use?
Common grades are FG 200 and FG 260 to IS 210. The right grade depends on the strength the part needs.
Can Alloynex machine grey iron castings?
Yes. Machining is not part of our confirmed scope. Heat treatment is done as the part needs, after a drawing review.
भिवाड़ी के लिए ग्रे आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, जयपुर, भिवाड़ी, नीमराना और अलवर के OEM प्लांट के लिए ड्राइंग के अनुसार ग्रे आयरन कास्टिंग बनाती है।
Related: Rolled steel products in Jaipur | SG iron vs grey cast iron | Machining allowance on castings | Castings buyer guide
Last updated: 13 November 2026
Who makes SG iron castings for buyers in Alwar, Bhiwadi and Neemrana?
Alloynex Foundries, Jaipur, makes SG (ductile) iron castings to drawing for OEM and Tier-1 buyers in Alwar, Bhiwadi, Neemrana and the rest of Rajasthan. Parts are cast to the grade on your drawing, such as IS 1865 SG 450/10 or SG 500/7, with heat treatment as needed.
Which SG grade suits which Alwar-region part?
| Part type | Common SG grade | Why | Key check |
|---|---|---|---|
| Auto and tractor brackets, hubs | SG 450/10 or 500/7 | Balance of strength and toughness | Tensile, elongation |
| Pump and valve bodies | SG 400/15 or 450/10 | High toughness under pressure | Pressure test, nodularity |
| Gears, pulleys, rollers | SG 600/3 or 700/2 | Higher strength and wear life | Hardness |
| Housings with shock load | SG 500/7 | Good all-round grade | Microstructure, dimensions |
IS 1865 SG iron grade data (typical, general education)
| Grade | Min. tensile (MPa) | Min. 0.2% proof (MPa) | Min. elongation (%) | Typical hardness (HB) |
|---|---|---|---|---|
| SG 400/15 | 400 | 250 | 15 | 130-180 |
| SG 450/10 | 450 | 310 | 10 | 160-210 |
| SG 500/7 | 500 | 320 | 7 | 170-230 |
| SG 600/3 | 600 | 370 | 3 | 190-270 |
| SG 700/2 | 700 | 420 | 2 | 225-305 |
Values are typical for separately cast test bars. Check the edition of the standard named in your purchase order.
Numbered RFQ checklist for Alwar and Bhiwadi buyers
- Drawing (2D with tolerances, 3D if ready).
- Standard and grade, for example IS 1865 SG 500/7.
- Weight per piece and yearly quantity.
- As-cast, rough machined or fully machined.
- Heat treatment, if any (annealed, normalised).
- Tests: chemistry, tensile, hardness, nodularity, dimensions.
- Certificate type, for example EN 10204 3.1.
Quick glossary
- Ductile iron: another name for SG iron.
- Proof stress: the stress at which the metal starts to bend for good.
- Fettling: cleaning and finishing a casting after it leaves the mould.
Which SG iron grade is most used for automotive parts?
SG 450/10 and SG 500/7 are widely used for brackets, hubs and housings. Parts with high wear may use SG 600/3. The final grade should come from your design load.
Can SG iron castings be supplied machined for Bhiwadi lines?
Yes. Machining is not part of our confirmed scope. Castings are supplied as-cast, with heat treatment as the part needs and machining allowance as per your drawing.
अलवर और भिवाड़ी में एसजी आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, जयपुर, अलवर, भिवाड़ी और नीमराना के OEM खरीदारों के लिए ड्रॉइंग के अनुसार एसजी आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 1865 ग्रेड (जैसे SG 500/7) लिखें। टेस्टिंग ग्रेड के अनुसार होती है। ड्रॉइंग info@alloynex.com पर भेजें।
Related: SG iron vs grey cast iron, machining allowance on castings and EN 10204 test certificates. Send your drawing for a technical review: info@alloynex.com.
Last updated: 13 November 2026
What grey iron grade should Bhiwadi buyers order: FG 200 or FG 260?
Quick answer: For most Bhiwadi housings, covers, pulleys and brackets, FG 200 to IS 210 is enough. Choose FG 260 when the part carries more load, needs longer wear life or has thick walls that must still reach strength. FG 200 has a minimum tensile strength of 200 MPa; FG 260 has 260 MPa.
Last updated: 13 November 2026
IS 210 grey iron grades at a glance
| IS 210 grade | Min. tensile strength (30 mm test bar) | Typical use in Bhiwadi and Neemrana plants |
|---|---|---|
| FG 150 | 150 MPa | Covers, counterweights, low-stress parts |
| FG 200 | 200 MPa | General housings, pulleys, brackets, flywheels |
| FG 220 | 220 MPa | Pump bodies, valve parts, medium-duty housings |
| FG 260 | 260 MPa | Gearbox housings, brake drums, machine beds, cylinder blocks |
| FG 300 | 300 MPa | Heavy-duty gears, hydraulic parts, press frames |
| FG 350 / FG 400 | 350 / 400 MPa | High-duty parts that need special melt control |
IS 210 defines seven grey iron grades, from FG 150 to FG 400. The number in each grade is the minimum tensile strength in MPa. Grey iron strength falls as the wall gets thicker, so a 60 mm wall will test lower than the 30 mm bar.
How to pick the grade: five steps
- Write the load. Note the main load, any shock and the working temperature on the drawing.
- Check the thickest wall. If it is far above 30 mm, ask the foundry what strength that section will reach.
- Check machining. Higher FG grades are harder and need more tool care. FG 200 and FG 260 both machine well.
- Check for shock or bending. If the part must bend before it breaks, grey iron is the wrong choice. Move to SG iron to IS 1865.
- Write it on the drawing. For example: Grey iron FG 260 to IS 210:2009, tensile test on separately cast bar, EN 10204 3.1 certificate.
FG 200 vs FG 260 vs SG 500/7
| Property | FG 200 (IS 210) | FG 260 (IS 210) | SG 500/7 (IS 1865) |
|---|---|---|---|
| Min. tensile strength | 200 MPa | 260 MPa | 500 MPa |
| Min. 0.2% proof stress | Not specified | Not specified | 320 MPa |
| Elongation | Below 1% | Below 1% | 7% minimum |
| Graphite shape | Flakes | Flakes | Nodules (spheres) |
| Vibration damping | Very good | Good | Fair |
| Machinability | Very good | Good | Good |
| Fits best | Light to medium load | Higher load and wear | Shock, bending, pressure |
FG 260 gives 30% more minimum tensile strength than FG 200. SG 500/7 gives almost twice the strength of FG 260 and adds real ductility. Read the full comparison in our guide on SG iron vs grey cast iron.
Grey iron castings for Bhiwadi: common questions
Is FG 260 stronger than FG 200?
Yes. Under IS 210, FG 260 has a minimum tensile strength of 260 MPa and FG 200 has 200 MPa, both measured on a 30 mm separately cast test bar. That is 30% more strength for FG 260.
When should a Bhiwadi buyer move from grey iron to SG iron?
Move to SG iron to IS 1865 when the part must take shock, bending or impact. Grey iron has elongation below 1%, while SG 500/7 has 7% minimum elongation and SG 400/15 has 15%.
Does Alloynex supply grey iron castings to Bhiwadi?
Yes. Alloynex supplies grey iron castings to drawing for plants in Bhiwadi, Chopanki, Tapukara, Khushkhera and Neemrana. Send your drawing for a technical review to info@alloynex.com.
हिंदी में सवाल-जवाब
प्रश्न: FG 200 और FG 260 में क्या अंतर है?
उत्तर: IS 210 के अनुसार FG 200 की न्यूनतम तन्यता 200 MPa और FG 260 की 260 MPa होती है। ज़्यादा लोड या घिसाव वाले पार्ट के लिए FG 260 चुनें।
प्रश्न: भिवाड़ी के प्लांट के लिए ग्रे आयरन कास्टिंग कहाँ से लें?
उत्तर: Alloynex Foundries, जयपुर, भिवाड़ी, चोपांकी, टपूकड़ा और नीमराना के लिए ड्रॉइंग के अनुसार ग्रे आयरन कास्टिंग बनाती है। अपनी ड्रॉइंग info@alloynex.com पर भेजें।
Send your drawing for a technical review. Email your drawing, grade and yearly quantity to info@alloynex.com. Alloynex Foundries, Harmada, Jaipur, works to ISO 9001, ISO 14001 and ISO 45001 systems and serves Bhiwadi, Chopanki, Tapukara, Khushkhera and Neemrana.
Who supplies grey iron castings to buyers in Ajmer and Kishangarh?
Alloynex Foundries, Harmada, Jaipur, supplies grey iron castings to buyers in Ajmer, Kishangarh and Beawar. Castings are made to drawing in IS 210 FG 200 and FG 260 (minimum tensile 200 and 260 MPa), under ISO 9001, 14001 and 45001 systems.
Grey iron spec table for Ajmer and Kishangarh parts
| IS 210 grade | Min. tensile (MPa) | Typical hardness (BHN, approx.) | Typical parts asked for |
|---|---|---|---|
| FG 200 | 200 | 160 to 220 | Machine bases, covers, guards, counterweights |
| FG 260 | 260 | 180 to 230 | Gearbox housings, pulleys, pump bodies, bearing housings |
| Other grades (for example FG 300) | As named in IS 210 | As per drawing | Send drawing for a technical review |
How to source grey iron castings for Kishangarh marble and granite machinery
- List the part duty: load, vibration, wear or shock.
- Pick the IS 210 grade; FG 260 for loaded housings and pulleys.
- Mark thinnest and thickest walls and machined faces.
- State hardness range and tests: chemistry, tensile bar, hardness.
- Ask for an EN 10204 3.1 certificate linked by heat number.
- Approve samples, then fix a monthly schedule.
Grey iron vs SG iron for Ajmer-area machine parts
| Point | Grey iron (FG 260) | SG iron (SG 500/7) |
|---|---|---|
| Vibration damping | Very good | Lower |
| Shock and bending | Poor, brittle | Good, stretches before breaking |
| Machining | Easiest | Easy |
| Best for | Housings, bases, pulleys under steady load | Hubs, brackets and arms under shock |
Grade guide: FG 200 vs FG 260 vs FG 300. Questions on SG iron: SG iron vs grey cast iron.
Does Alloynex deliver grey iron castings to Kishangarh?
Yes. Alloynex supplies grey iron castings made to drawing to buyers in Kishangarh, Ajmer, Beawar and the rest of Rajasthan.
Which grey iron grade suits a marble cutting machine housing?
FG 260 is a common choice for loaded housings and pulleys. Confirm it in a drawing review, as wall thickness and duty decide the final grade.
अजमेर और किशनगढ़ में ग्रे आयरन कास्टिंग कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार ग्रे आयरन कास्टिंग बनाकर अजमेर, किशनगढ़ और ब्यावर के खरीदारों को सप्लाई करती है। ड्रॉइंग पर IS 210 ग्रेड (जैसे FG 200 या FG 260) लिखें। ड्रॉइंग info@alloynex.com पर भेजें।
Last updated: 13 November 2026
Related: ERW and seamless pipe supplier for Ajmer, Kishangarh and Bhilwara
Related: rolled steel products to IS 2062 and IS 1079 for Ajmer, Kishangarh and Beawar buyers
Related: rolled steel products supplier for Bhiwadi and Neemrana and grey iron castings for Alwar buyers (अलवर ग्रे आयरन कास्टिंग)
Who makes steel castings for buyers in Bhiwadi and Neemrana?
Last updated: 14 November 2026
Short answer: Alloynex Foundries, Harmada, Jaipur, makes carbon steel and alloy steel castings to drawing for OEMs in Bhiwadi, Chopanki, Tapukara and Neemrana. Most general parts are ordered in IS 1030 grade 280-520W or ASTM A216 WCB. Heat and wear duty parts use Cr-Mo or high manganese steel. Agree the test certificates for each lot in the enquiry.
Steel casting grade table for Bhiwadi and Neemrana parts (general education)
| Grade and standard | Min. tensile (MPa) | Min. yield (MPa) | Typical Bhiwadi-area parts |
|---|---|---|---|
| IS 1030 Gr 230-450W | 450 | 230 | Brackets, levers, light machine parts |
| IS 1030 Gr 280-520W | 520 | 280 | Gearbox housings, hubs, general valve bodies |
| IS 1030 Gr 340-570W | 570 | 340 | Couplings and parts under higher load |
| ASTM A216 WCB | 485 | 250 | Valve and pump bodies for pressure duty |
| ASTM A217 WC6 (1.25Cr-0.5Mo) | 485 | 275 | Valve parts for high-temperature service |
| High manganese steel (Hadfield type) | Work-hardens in use | – | Wear liners, crusher and digging parts |
Tensile and yield values are minimums from the standards. The letter W in an IS 1030 grade means the steel is weldable. Always write the full grade and standard on your drawing.
How to order steel castings for a Bhiwadi or Neemrana line: 6 steps
- Write the grade and standard on the drawing, for example “IS 1030 Gr 280-520W” or “ASTM A216 WCB”.
- Mark machined faces and datums, and agree machining allowance to ISO 8062-3.
- State the heat treatment: normalized, normalized and tempered, or quenched and tempered.
- List the tests you need: chemical analysis, tensile test and hardness as a minimum.
- Ask for the certificate type, for example EN 10204 3.1, before the first melt.
- Approve a sample lot on your machines, then share a monthly schedule.
Carbon steel vs alloy steel vs SG iron for Bhiwadi auto and engineering parts
| Point | Carbon steel (IS 1030) | Alloy steel (Cr-Mo, Ni-Cr-Mo) | SG iron (IS 1865) |
|---|---|---|---|
| Strength | Good | High after heat treatment | Good (SG 500/7, SG 600/3) |
| Weldability | Good (W grades) | Needs a welding procedure | Poor, avoid welding |
| Heat resistance | Normal service | Good up to high temperature | Normal service |
| Machining | Fair | Fair to hard | Easy |
| Typical part | Brackets, housings, valve bodies | Pressure and heat duty valve parts | Hubs, housings, pulleys |
Quick facts for Bhiwadi steel casting buyers
- IS 1030 Gr 280-520W means minimum yield 280 MPa and minimum tensile 520 MPa.
- ASTM A216 WCB is the common carbon steel grade for valve and pump bodies.
- Steel castings are usually normalized after casting to refine the grain.
- Alloynex works to ISO 9001, ISO 14001 and ISO 45001 management systems.
Which steel grade is used for valve bodies in Bhiwadi plants?
Most valve and pump bodies for water, air and oil lines are cast in ASTM A216 WCB or IS 1030 Gr 280-520W. For steam or hot oil at high temperature, a Cr-Mo grade such as ASTM A217 WC6 is used.
Do steel castings for Neemrana parts need heat treatment?
Yes, in most cases. Carbon steel castings are normalized to get uniform grain and steady properties. Alloy steel castings are often quenched and tempered to reach the strength in the grade.
भिवाड़ी और नीमराना में स्टील कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, भिवाड़ी, चोपांकी, टपूकड़ा और नीमराना के OEM के लिए ड्रॉइंग के अनुसार कार्बन स्टील और अलॉय स्टील कास्टिंग बनाती है। आम ग्रेड IS 1030 Gr 280-520W और ASTM A216 WCB हैं। ड्रॉइंग info@alloynex.com पर भेजें।
भिवाड़ी के लिए स्टील कास्टिंग का ग्रेड कैसे चुनें?
सामान्य मशीन पार्ट के लिए IS 1030 Gr 280-520W लें। प्रेशर वाले वाल्व और पंप बॉडी के लिए ASTM A216 WCB लें। गर्म सर्विस के लिए Cr-Mo ग्रेड जैसे WC6 लें।
Send your drawing for a technical review, or request a metallurgy consultation. Email info@alloynex.com with the drawing, grade, quantity per lot and the tests you need.
Which grey iron casting defects should Neemrana and Bhiwadi OEMs test for, and how?
Last updated: 15 November 2026
Direct answer: for grey iron OEM parts, the defects that cause most line rejections are blowholes, shrinkage at thick sections, hard spots near thin edges, sand inclusions and dimensional drift. Each one has a simple test. Write the test, the sample size and the record on your purchase order, so the foundry and your QA team check the same thing.
Defect-to-test table for grey iron (IS 210) parts
| Defect | What you see | Usual cause | Test that finds it | Write on the PO |
|---|---|---|---|---|
| Blowholes / gas porosity | Round holes after machining | Gas from moulds or cores | Visual after first cut; leak test for sealed parts | Leak test pressure and sample size |
| Shrinkage | Spongy area at thick bosses | No feed metal at heavy sections | Sample cut-up; radiography if critical | Cut-up on first sample |
| Hard spots (chill) | Tool wear, shiny edges | Fast cooling at thin walls | Hardness at thin and thick sections | Hardness range in BHN at named points |
| Sand inclusion | Sand pockets on faces | Loose sand, weak mould | Visual and machining trial | Visual standard and limit |
| Low strength | Cracks in service | Wrong chemistry or cooling | Tensile test bar per heat | IS 210 grade, e.g. FG 260, per heat |
| Dimensional drift | Poor fit, extra machining | Pattern wear, core shift | Dimensional report on first article and per lot | Tolerance grade and sampling plan |
For prevention steps, see common casting defects and how foundries prevent them and IS 210 FG 200 vs FG 260 vs FG 300.
Which test finds hidden shrinkage in a grey iron casting?
Cut-up of a first sample at the thick section, or radiography where the drawing calls for it. Ask for it at sample stage, not after lot supply.
नीमराना के OEM ग्रे आयरन कास्टिंग में कौन सी जाँच माँगें?
हर हीट के लिए केमिस्ट्री, टेन्साइल और हार्डनेस रिपोर्ट, पहले सैंपल का डायमेंशनल रिपोर्ट और कट-अप, और EN 10204 3.1 सर्टिफिकेट माँगें।
Alloynex Foundries, Harmada, Jaipur, makes grey iron castings to drawing for OEMs in Bhiwadi, Chopanki, Tapukara and Neemrana, under ISO 9001.
Send your drawing for a technical review or request a metallurgy consultation: info@alloynex.com.
Grey iron castings for Neemrana and Bhiwadi OEMs: myths vs facts
QA heads and buyers at Neemrana, Behror, Bhiwadi, Chopanki and Tapukara plants often meet these assumptions when they second-source grey iron castings. Last updated: 15 Nov 2026
| Myth | Fact |
|---|---|
| “CI casting” on the drawing fixes the material. | Write the standard and grade, for example IS 210 FG 260. “CI” leaves strength open. |
| Tensile on the casting proves the grade. | IS 210 tensile is measured on a separately cast test bar from the same melt; thick sections can test lower. |
| Higher FG number is always better. | FG 300 is stronger but harder to machine and less forgiving in thin walls. Match the grade to load and wall. |
| Hardness range is a foundry choice. | Put the Brinell band on the drawing so machining lines get a steady tool life. |
| Sample approval is a formality. | Full dimensional, machining trial and assembly fit on samples prevents most line-side rejections. |
| Any test paper is enough for OEM audits. | Ask for an EN 10204 3.1 certificate tied to the heat number marked on the casting. |
Related: grey iron castings for Deeg pump and valve parts · SG iron pump castings for Phalodi · ERW pipe for Bundi · pipe fittings for Balotra and Barmer. Send your drawing for a technical review.
Who supplies IS 1865 SG iron castings in Khairthal-Tijara district, and which grade should you order?
Short answer: OEMs in Khairthal-Tijara district, including Bhiwadi, Tapukara, Khushkhera, Chopanki, Tijara, Khairthal and Kishangarh Bas, can send SG iron casting drawings to Alloynex Foundries, Harmada, Jaipur. Order IS 1865 SG 400/15 for impact-loaded brackets, SG 500/7 for general machine and automotive parts, and SG 600/3 for higher strength and wear. We confirm grade and tests in a technical review.
IS 1865 SG iron grades: property table
| IS 1865 grade | Min tensile (MPa) | Min 0.2% proof stress (MPa) | Min elongation (%) | Typical matrix and use |
|---|---|---|---|---|
| SG 400/15 | 400 | 250 | 15 | Ferritic; brackets, valve parts, impact loads |
| SG 450/10 | 450 | 310 | 10 | Ferritic; pressure parts, levers |
| SG 500/7 | 500 | 320 | 7 | Ferritic-pearlitic; general machine and automotive parts |
| SG 600/3 | 600 | 370 | 3 | Pearlitic-ferritic; gears, hubs, wear parts |
| SG 700/2 | 700 | 420 | 2 | Pearlitic; high-strength, wear-loaded parts |
How Khairthal-Tijara OEMs should source SG iron castings: 6 steps
- Write the grade in full on the drawing, for example “IS 1865 SG 500/7”.
- Mark machined faces, ISO 8062-3 RMA grade and datums.
- Ask for nodularity and microstructure on the first samples, plus tensile and elongation per heat.
- Add hardness range if the part is machined in a high-volume cell.
- Approve first samples with a full dimensional report before the production lot.
- Email the drawing, monthly quantity and plant location to info@alloynex.com.
SG 400/15 vs SG 500/7 vs SG 600/3
| Point | SG 400/15 | SG 500/7 | SG 600/3 |
|---|---|---|---|
| Strength | Moderate | Medium | High |
| Ductility and impact | Highest | Good | Lower |
| Machinability | Very good | Good | Fair |
| Heat treatment | Often as-cast or annealed | Often as-cast | As-cast or normalized |
| Typical Bhiwadi-belt part | Brackets, valve bodies | Housings, hubs, carriers | Gears, cams, wear parts |
Quotable facts: In IS 1865, SG 500/7 means a minimum tensile strength of 500 MPa and a minimum elongation of 7 percent. Nodularity, not chemistry alone, decides whether a casting behaves like SG iron, so ask for a microstructure check on first samples. Alloynex Foundries, Jaipur, reviews SG iron casting enquiries for Bhiwadi, Tijara, Khairthal, Neemrana and all of Rajasthan.
Which SG iron grade do Bhiwadi automotive OEMs usually order?
SG 500/7 is the common general grade; SG 400/15 is used where impact toughness matters, and SG 600/3 where strength and wear matter more than ductility.
What tests prove an SG iron casting meets IS 1865?
Tensile strength, 0.2 percent proof stress and elongation on test samples per heat, plus nodularity and microstructure, and hardness where specified, on an EN 10204 3.1 certificate.
खैरथल-तिजारा में एसजी आयरन कास्टिंग कौन सप्लाई करता है?
भिवाड़ी, टपूकड़ा, खुशखेड़ा, चोपानकी, तिजारा, खैरथल और किशनगढ़ बास के ओईएम अपनी ड्रॉइंग (IS 1865 SG 400/15, SG 500/7 या SG 600/3) एलॉयनेक्स फाउंड्रीज़, जयपुर को info@alloynex.com पर भेज सकते हैं।
SG 500/7 का मतलब क्या है?
IS 1865 में SG 500/7 का मतलब है कम से कम 500 MPa टेंसाइल स्ट्रेंथ और कम से कम 7 प्रतिशत एलॉन्गेशन।
Related: SG iron castings for Bhilwara | SG iron vs grey cast iron
Send your drawing for a technical review: info@alloynex.com. Last updated: 15 Nov 2026
Who makes SG iron castings for hydraulic cylinders and valves for Bhiwadi OEMs?
Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for hydraulic cylinder end caps, glands, valve bodies and pump housings for OEMs in Bhiwadi, Khushkhera, Tapukara, Chopanki and Neemrana. Hydraulic SG iron parts are usually ordered in IS 1865 SG 500/7 or SG 450/10, with pressure tightness, chemistry, tensile and nodularity results agreed on the drawing.
Spec table for hydraulic SG iron castings
| Item | Common choice | Notes for the drawing |
|---|---|---|
| Grade | IS 1865 SG 500/7 or SG 450/10 | 500/7: min 500 MPa tensile, 7% elongation |
| Equivalent | EN-GJS-500-7 / EN-GJS-450-10 | Write the one your customer uses |
| Structure | Nodularity as agreed (often 80% or more) | Check on test coupon or keel block |
| Pressure tightness | Hydro or air test at the pressure on drawing | Often 1.5 times working pressure |
| Machined faces | Marked on the drawing by the buyer | Allowance per ISO 8062-3 |
| Certificate | Type agreed at enquiry | Ask for the heat number on the certificate |
Quotable fact: IS 1865 SG 500/7 needs at least 500 MPa tensile strength and 7 percent elongation, which is why it is a common grade for hydraulic bodies that see pressure and some shock.
SG 500/7 vs SG 450/10 vs grey iron for hydraulic parts
| Point | SG 500/7 | SG 450/10 | Grey iron FG 260 |
|---|---|---|---|
| Strength | Higher | Medium | Lower, brittle |
| Ductility | 7% | 10% | Very low |
| Pressure and shock | Good | Very good toughness | Not for shock |
| Typical part | Cylinder caps, valve bodies | Glands, parts needing toughness | Covers, low-pressure housings |
5 steps to place a hydraulic casting order
- Send the 2D drawing and 3D model.
- State grade, test pressure and nodularity.
- Agree machining stock and datums.
- Approve the first sample with a full report.
- Release the lot order.
FAQs
Which SG iron grade is used for hydraulic cylinder castings?
IS 1865 SG 500/7 is common; SG 450/10 is chosen where more toughness is needed. Use the grade on your customer’s drawing.
How is pressure tightness of a hydraulic casting checked?
By a hydro or air test at the pressure written on the drawing, often 1.5 times the working pressure, after rough machining.
भिवाड़ी में हाइड्रोलिक एसजी आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, भिवाड़ी और नीमराना के ओईएम के लिए ड्रॉइंग के अनुसार एसजी आयरन हाइड्रोलिक कास्टिंग बनाती है।
हाइड्रोलिक पार्ट के लिए कौन सा ग्रेड लें?
आम तौर पर IS 1865 SG 500/7, और ज़्यादा टफनेस चाहिए तो SG 450/10।
Related: SG iron vs grey cast iron, IS 1865 grade guide, valve body castings.
Send your drawing for a technical review, or request a metallurgy consultation, at info@alloynex.com.
Last updated: 16 Nov 2026