Steel Castings for Karauli and Dholpur: Grades, Tests and How to Order

Steel castings for Karauli and Dholpur buyers are made to drawing by Alloynex Foundries in Harmada, Jaipur, in IS 1030 carbon steel grades and in alloy steel grades such as IS 276 high manganese steel. Buyers in Karauli, Hindaun, Dholpur and Bari can send drawings to info@alloynex.com.

Last updated: 15 November 2026

This guide is for plant engineers, maintenance heads and buyers in Karauli and Dholpur districts. It explains which steel casting grade fits which part, how steel compares with grey and SG iron, which tests to ask for, and what to send with an enquiry. It uses simple words and real Indian standards.

Who supplies steel castings to Karauli and Dholpur?

Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013, makes steel and alloy steel castings to customer drawings and supplies buyers in Karauli and Dholpur from Jaipur. The work is planned around your drawing: grade review, pattern, moulding, melting, heat treatment as the part needs, fettling and inspection.

Karauli and Dholpur are known for red and pink sandstone. Quarries, stone cutting and polishing units, crushers, pump users and farm machinery workshops in these districts need parts that take shock, wear and steady load. Steel castings suit these duties because steel has real elongation and can be welded and repaired, unlike grey iron.

Which steel casting grades suit Karauli and Dholpur parts?

Most general parts are ordered in IS 1030 grades. The grade name gives two numbers: minimum yield strength and minimum tensile strength in MPa. A “W” at the end means the grade has controlled chemistry for welding. Parts that face heavy impact and abrasion, such as crusher jaws and liners, are usually ordered in IS 276 austenitic high manganese steel.

Grade (standard)Min. yield / tensile (MPa)Usual conditionTypical Karauli and Dholpur parts
200-400W (IS 1030)200 / 400Annealed or normalizedBrackets, covers, light frames, welded assemblies
230-450W (IS 1030)230 / 450NormalizedPump and valve bodies, machine bases, levers
280-520W (IS 1030)280 / 520Normalized or normalized and temperedGear blanks, wheels, couplings, crusher frames
340-570W (IS 1030)340 / 570Normalized and temperedHeavily loaded hubs, shaft housings, lifting parts
High manganese steel (IS 276)Grade by chemistryWater toughenedCrusher jaws, cone liners, hammers, blow bars

Values are the minimums named in IS 1030; always check the current edition and write the grade with its standard on the drawing, for example “280-520W to IS 1030, normalized and tempered”. For a full grade list, read IS 1030 steel casting grades.

Steel castings or iron castings: which is right for your part?

Choose steel when the part takes shock, must be welded, or must not break without warning. Choose grey iron (IS 210) for heavy, stiff parts that need vibration damping and easy machining. Choose SG iron (IS 1865) when you need good strength and some elongation without welding.

PointCast steel (IS 1030)SG iron (IS 1865)Grey iron (IS 210)
Shock and impactBestGoodPoor, brittle
Weld repairYes, with W gradesDifficultDifficult
Vibration dampingLowMediumBest
MachiningFairGoodVery good
Heat treatmentUsually neededSometimesRarely

For a deeper look at grades, see steel vs alloy steel castings and SG iron vs grey cast iron.

How do you choose and order steel castings? Five steps

  1. Describe the duty. Note the load, shock, wear, temperature and whether the part will be welded.
  2. Pick the grade. Start with the first IS 1030 grade in the table that meets the load. Move to IS 276 only for impact and abrasion.
  3. Fix the heat treatment. Write annealed, normalized or normalized and tempered on the drawing. Our guide on normalizing vs annealing steel castings explains the difference.
  4. Set tolerances and machining stock. Use ISO 8062-3 casting tolerance grades and say which faces are machined.
  5. Agree tests and documents. Ask for chemistry, tensile and hardness results on an EN 10204 3.1 certificate for each heat.

What tests should come with steel castings?

A steel casting is proven by test numbers that are linked to its heat. These are the checks most buyers in Karauli and Dholpur should ask for:

  • Chemical analysis of each heat, to confirm carbon, manganese, sulphur and phosphorus are inside the grade limits.
  • Tensile test with yield strength and elongation, on test bars from the same heat and heat treatment batch.
  • Hardness test (Brinell), to confirm the heat treatment.
  • Visual and dimensional check against the drawing, with a report for the first-off part.
  • Extra checks if needed, such as ultrasonic or magnetic particle testing for critical parts, agreed at enquiry stage.

Read our guide to EN 10204 test certificates to see what a 3.1 certificate should show.

FAQs

Does Alloynex supply steel castings to Karauli and Dholpur?

Yes. Alloynex Foundries, Harmada, Jaipur, makes steel and alloy steel castings to drawing and supplies buyers in Karauli, Hindaun, Dholpur and Bari. Agree the tests and certificate you need for each lot before the order.

Which steel is used for crusher jaws in sandstone quarries?

Crusher jaws and liners that take heavy impact are usually made in IS 276 austenitic high manganese steel, which hardens at the surface in service. Sliding wear with low impact may suit a hardened low alloy steel better.

What does 280-520W mean in IS 1030?

It means a minimum yield strength of 280 MPa and a minimum tensile strength of 520 MPa. The W shows the grade has chemistry limits that make it suitable for welding.

Can a cracked steel casting be weld repaired?

Weldable W grades of IS 1030 can usually be repaired by welding with a proper procedure and, where needed, heat treatment after welding. Agree the repair rules with your supplier before the order.

करौली और धौलपुर में स्टील कास्टिंग कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार स्टील और अलॉय स्टील कास्टिंग बनाती है और करौली, हिंडौन, धौलपुर और बाड़ी के खरीदारों को सप्लाई करती है। ड्रॉइंग पर ग्रेड (जैसे IS 1030 या IS 276) लिखें। अपनी ड्रॉइंग info@alloynex.com पर भेजें।

पत्थर खदान के क्रशर पार्ट के लिए कौन सा स्टील ठीक है?

क्रशर जॉ और लाइनर के लिए आमतौर पर IS 276 हाई मैंगनीज़ स्टील लिया जाता है, क्योंकि यह चोट लगने पर सतह से और सख्त हो जाता है। फ्रेम और हाउसिंग के लिए IS 1030 का 280-520W ग्रेड आम है।

Send your drawing for a technical review

Planning a new steel part or a second source for a quarry, crusher or pump unit in Karauli or Dholpur? Send your drawing for a technical review, or request a metallurgy consultation. Email your drawing, grade, quantity and delivery town to info@alloynex.com. Alloynex Foundries works under ISO 9001, ISO 14001 and ISO 45001 systems.

Related: SG iron castings for Jhalawar and Kota buyers, pipe fittings for Kota plants and grey iron castings for Salumbar buyers.

Related: steel castings for Didwana-Kuchaman and Makrana, SG iron castings for Bharatpur buyers, seamless steel tubes for Jodhpur plants and grey iron castings for Tonk and Jaisalmer.

Steel casting terms Karauli and Dholpur buyers should know

Quarry, crusher and pump teams in Karauli, Hindaun, Dholpur and Bari read these words on drawings and certificates. Knowing them prevents the most common ordering mistakes. Last updated: 15 Nov 2026

TermPlain meaningWhere it shows up in your order
280-520W (IS 1030)Min. yield 280 MPa, min. tensile 520 MPa; W = weldable chemistryFrames, housings, brackets that may need weld repair
IS 276 high manganese steelAustenitic steel that work-hardens under impactCrusher jaws, liners, hammer tips for sandstone
NormalizingHeating above the critical range and cooling in air to refine grainUsual condition for carbon steel castings
Water tougheningSolution treatment and water quench for manganese steelMust be stated for IS 276 parts
Charpy impactEnergy absorbed by a notched bar when struckAsk for it on parts that see shock or cold starts
Radiography / UTVolumetric checks for internal shrinkage and porosityPressure parts and critical load parts
Heat numberUnique code for one meltMust match between casting marking and certificate
Feeder / riser padMetal reservoir that feeds shrinkage; removed after castingAgree where pads may sit on machined faces
Glossary of steel casting terms for Karauli and Dholpur.

करौली–धौलपुर के खरीदार: ड्रॉइंग पर ग्रेड, हीट ट्रीटमेंट और टेस्ट साफ़ लिखें और info@alloynex.com पर भेजें।

Related: pipe fittings for Balotra and Barmer · grey iron castings for Deeg · ERW pipe for Bundi · SG iron pump castings for Phalodi.

Related: high manganese IS 276 castings for crusher jaws and liners, steel castings for Tonk buyers, valve body castings in Jaipur and grey iron counterweight castings for Bhilwara

Steel casting failed in service at a Karauli or Dholpur quarry? Troubleshoot by symptom

When a steel casting fails in a sandstone quarry, crusher or pump, the failure surface usually points to the cause: a bright granular break suggests brittle steel or wrong heat treatment, a smooth beach-marked break suggests fatigue, fast thinning suggests the wrong wear grade, and cracks at corners suggest a design or casting defect. Match the symptom, then change grade, heat treatment or design.

Last updated: 16 Nov 2026

Symptom in the fieldLikely causeWhat to ask the foundryTypical change
Sudden break, bright and granular surfaceLow toughness: coarse grain, no normalizing, high carbonHeat treatment record, impact or elongation resultNormalize or normalize and temper; W grade of IS 1030
Break with smooth zone and beach marksFatigue from a notch, sharp corner or porositySection and NDT of the failed areaAdd fillets; UT or MPI at the stressed zone
Jaw or liner wears thin quicklyGrade does not suit abrasion or impact levelHardness and grade on certificateIS 276 manganese for impact; hardened low alloy for sliding wear
Manganese steel part cracks earlyNot solution treated, or too little impact to work hardenWater toughening record, microstructureCorrect solution treatment; review if impact is too low
Crack at a weld repairRepair without procedure or post-weld heat treatmentRepair map and weld procedureWeld repair only on W grades with agreed procedure
Leak in pump or valve bodyShrinkage or gas porosity in a pressure wallPressure test record, X-ray of first articleFeeding change; pressure test every body

Fact: IS 276 austenitic manganese steel work hardens at the surface under impact, which is why it suits crusher jaws but can wear fast under low-impact sliding.

Related: marble machinery castings in Kishangarh · FG 260 grey iron castings for Sikar · common casting defects

Send photos of the failed part and the drawing for a technical review: info@alloynex.com.

Related: grey iron castings for Sawai Madhopur and Gangapur City, flywheel castings for Alwar buyers: FG 260 or SG 500/7