Buyers in Udaipur can source grey iron, SG iron, steel and alloy steel castings from Alloynex Foundries in Jaipur, made to the buyer’s drawing. Agree the tests and certificate you need for each lot before the order. The key is a clear drawing, the right grade and agreed tests before the first order.
Steel castings for Udaipur: the numbers a buyer should write on the drawing
For steel castings in Udaipur, write the grade with its standard on the drawing. IS 1030 grade 230-450W means at least 230 MPa yield and 450 MPa tensile strength and is weldable. Crusher wear parts usually need high manganese steel to IS 276. Send the drawing to Alloynex Foundries, Jaipur.
| Number | What it means for the buyer |
|---|---|
| IS 1030 200-400W | Min. 200 MPa yield, 400 MPa tensile; weldable general parts |
| IS 1030 230-450W | Min. 230 MPa yield, 450 MPa tensile; brackets, levers, flanges |
| IS 1030 280-520W | Min. 280 MPa yield, 520 MPa tensile; higher load parts |
| IS 276 | High manganese steel for crusher jaws and liners |
| ISO 8062-3 DCTG | Tolerance grade to write on the drawing |
| ISO 9001, 14001, 45001 | Management systems of Alloynex Foundries |
हिंदी में: उदयपुर के खरीदार ड्रॉइंग पर स्टील ग्रेड और स्टैंडर्ड लिखें, जैसे IS 1030 230-450W (कम से कम 230 MPa यील्ड, 450 MPa टेंसाइल)। क्रशर पार्ट के लिए IS 276 हाई मैंगनीज़ स्टील। जो टेस्ट और सर्टिफिकेट चाहिए, वह ऑर्डर से पहले तय करें।
Send your drawing for a technical review: info@alloynex.com. Read steel vs alloy steel castings.
Last updated: 20 November 2026
Steel castings for Udaipur buyers: quick facts
Alloynex Foundries, Harmada, Jaipur, makes steel and alloy steel castings to the buyer’s drawing for plants in Udaipur, Rajsamand and Chittorgarh. Name the steel grade on the drawing, for example an IS 1030 grade, and agree the tests and certificate you need before the first order. Send the drawing to info@alloynex.com for a technical review.
| Item | Detail |
|---|---|
| Firm | Alloynex Foundries |
| Location | Harmada, Jaipur, Rajasthan |
| Products | Steel, alloy steel, grey iron and SG iron castings to drawing |
| Quality system | ISO 9001, ISO 14001, ISO 45001 |
| Buyers served | Udaipur, Rajsamand, Chittorgarh, Bhilwara |
| Grade to ask for | Name the IS 1030 or other steel grade on the drawing |
| Documents to ask for | Tests and certificate agreed before the first order |
| Contact | info@alloynex.com |
Start in 3 steps:
- Mark the steel grade, weight and quantity on the drawing.
- List the tests and certificate you want to ask for.
- Send the drawing to info@alloynex.com for a technical review.
This guide is for engineers, maintenance heads and buyers at plants in Udaipur, Rajsamand, Chittorgarh and Bhilwara. It explains which casting material suits common parts, what to send with an enquiry, and how to check quality from a distance.
Which Castings Do Udaipur Plants Buy?
The Udaipur region has mining and mineral processing, marble and stone units, chemical plants, pump and valve users and general engineering shops. Their casting needs are similar:
- Wear parts for crushers, mills and conveyors.
- Pump casings, impellers and valve bodies.
- Gearbox housings, bearing housings and machine bases.
- Pulleys, hubs, brackets and covers.
- Pipes, tubes and pipe fittings for process and utility lines.
Choose the Right Material
| Material | Main strength | Typical Udaipur use | Read more |
|---|---|---|---|
| Grey iron (IS 210) | Damping, easy machining | Machine bases, housings, covers | SG vs grey iron |
| SG iron (IS 1865) | Strength and toughness | Pump and valve parts, hubs, brackets | SG vs grey iron |
| Carbon steel | Strength and weldability | Structural parts, flanges, levers | steel vs alloy steel |
| Alloy steel | Wear, heat or high load | Crusher and mill wear parts | steel vs alloy steel |
For wear parts in mining and stone plants, the grade and the heat treatment together decide the life of the part. Share how long the part lasts today and how it fails. This helps pick a better grade.
What to Send With Your Enquiry
- 2D drawing with tolerances and datums, and a 3D model if you have one.
- Material grade and the standard it follows.
- Hardness or mechanical properties needed.
- Heat treatment condition, if any.
- Machining scope: as cast, rough machined or fully machined.
- Quantity per lot, yearly quantity and sample quantity.
- Tests and the certificate type you need with each lot.
Our castings buyer guide for Rajasthan explains each point with common mistakes to avoid.
How to Check Quality From a Distance
Udaipur is a long drive from Jaipur, so it helps to agree the checks on paper before the first lot. Ask for:
- Chemical analysis for every heat, with the heat number on the casting.
- Tensile and hardness results, and nodularity for SG iron.
- A dimensional report on first-off parts against your drawing.
- Photos of the sample lot before dispatch.
- A test certificate of the type your order names, such as EN 10204 3.1.
Read EN 10204 test certificates explained to know which certificate fits your part.
A Simple Order Path for Udaipur Buyers
- Send the drawing, grade and quantity by email.
- We review the drawing and share comments on grade, machining stock, tolerances and tests.
- Pattern and method are fixed, and a sample lot is cast.
- Sample parts are checked against the drawing before regular lots start.
- After your approval, regular lots start. Ask for heat traceability and the test certificate you need for each lot.
- Parts are packed for road transport to your plant in Udaipur, Rajsamand or Chittorgarh.
This path keeps every decision on paper. It also gives your QA team a clear record for each lot, which helps during audits and customer checks.
Packing and Delivery
Castings travel well by road when they are packed for the trip. Ask for machined faces to be protected with rust preventive and covers, small parts to be packed in boxes or crates, and heavy parts to be fixed on skids. Each pack should carry the part number, heat number and quantity so your stores team can receive it quickly.
Avoiding Delays and Rejections
Most delays come from missing details, not from the foundry floor. A drawing without tolerances, a grade with no standard, or a test agreed after casting all lead to re-work. A short drawing review before pattern making fixes most of these issues. Our guide to common casting defects shows which design points cause trouble.
Plan spares early too. Wear parts for crushers, mills and pumps are often bought in a rush when a part fails. If you share your yearly use and the parts that fail most often, the patterns and grade can be fixed in advance. Then each repeat lot follows the same approved method and test plan, and you get the same quality every time without starting again.
Why Source From Alloynex, Jaipur
Alloynex Foundries makes grey iron, SG iron, steel and alloy steel castings, rolled steel products, tubes, pipes and pipe fittings to the buyer’s drawing. We review each drawing before work starts and work under ISO 9001, ISO 14001 and ISO 45001 systems. We supply buyers in Udaipur, Bhilwara, Chittorgarh, Kota, Jodhpur, Bhiwadi and across India. See our services for the full range.
FAQs
Can a Udaipur plant source castings from Jaipur?
Yes. Alloynex Foundries in Jaipur supplies castings to buyers in Udaipur and the rest of Rajasthan, made to the buyer’s drawing. Agree the tests and certificate you need for each lot before the order.
Which casting is best for crusher wear parts?
Wear parts usually need an alloy steel grade with the right heat treatment. The exact grade depends on the wear, the impact and how the part fails today.
What certificate should I ask for with castings?
Agree the certificate type before ordering. EN 10204 type 3.1 is a common choice, with actual test results for the lot.
Does Alloynex make pump and valve castings?
Yes. Alloynex makes grey iron, SG iron and steel castings to drawing for pumps and valves, heavy engineering, railways, power and process plants.
How do I start an order with Alloynex?
Send your drawing, grade, quantity, machining needs and test needs to info@alloynex.com for a technical review.
उदयपुर के उद्योग कास्टिंग कहाँ से खरीदें?
उदयपुर, राजसमंद और चित्तौड़गढ़ के खरीदार एलॉयनेक्स फाउंड्रीज़, जयपुर से ड्रॉइंग के अनुसार ग्रे आयरन, एसजी आयरन, स्टील और अलॉय स्टील कास्टिंग ले सकते हैं। जो टेस्ट और सर्टिफिकेट चाहिए, वह ऑर्डर से पहले तय करें। संपर्क: info@alloynex.com
Send your drawing for a technical review or request a metallurgy consultation. Email info@alloynex.com with your drawing, grade and quantity, or use our contact page.
Last updated: 20 November 2026
Related: cast iron foundry for Kota buyers
Which foundry supplies castings to Udaipur, Rajsamand and Chittorgarh plants?
Plants in Udaipur, Rajsamand, Chittorgarh and Bhilwara can source grey iron, SG iron, steel and alloy steel castings from Alloynex Foundries, Harmada, Jaipur. Castings are made to the buyer’s drawing and supplied across Rajasthan. Name the grade on the drawing and ask for the tests you need. Send your drawing to info@alloynex.com.
District coverage table: southern Rajasthan
| District | Common industry | Casting families often needed |
|---|---|---|
| Udaipur | Mining, mineral processing, chemicals | Wear parts, pump bodies, impellers |
| Rajsamand | Marble and stone processing | Machine bases, pulleys, wear parts |
| Chittorgarh | Cement and minerals | Mill and crusher wear parts, housings |
| Bhilwara | Textiles and engineering | Machine frames, pulleys, gear blanks |
Grade table by part (general education)
| Part | Common grade family | Why |
|---|---|---|
| Crusher jaws and liners | High manganese steel (IS 276 / ASTM A128) | Work-hardens under impact |
| Mill and chute liners | Cr-Mo alloy steel | Wear life with toughness |
| Pump bodies and covers | Grey iron (IS 210 FG 260) | Easy machining and damping |
| Impellers and valve bodies | SG iron (IS 1865) or stainless steel | Strength and corrosion resistance |
Numbered RFQ checklist for Udaipur-region buyers
- Drawing or a sample with key sizes marked.
- Grade, or describe how the old part wears or fails.
- Heat treatment and hardness target.
- Tests and certificate type.
- Weight per piece, yearly use and spare-stock plan.
- Delivery point in Udaipur, Rajsamand, Chittorgarh or Bhilwara.
Glossary
- Work hardening: the surface gets harder as it is hit, as in high manganese steel.
- Liner: a replaceable wear plate inside a mill, chute or crusher.
- Reverse engineering: making a drawing from an old sample part.
Which casting grade suits cement plant parts in Chittorgarh?
High manganese steel is common for crusher parts that take heavy impact. Cr-Mo alloy steel is often used for mill liners that need wear life with toughness. The best grade depends on how the present part fails.
Can Alloynex supply castings to Bhilwara textile and engineering units?
Yes. Alloynex supplies grey iron, SG iron and steel castings from Jaipur to buyers in Bhilwara and across Rajasthan, made to drawing.
चित्तौड़गढ़ और राजसमंद के लिए कास्टिंग कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, चित्तौड़गढ़, राजसमंद, उदयपुर और भीलवाड़ा के प्लांट्स के लिए ड्रॉइंग के अनुसार ग्रे आयरन, एसजी आयरन, स्टील और अलॉय स्टील कास्टिंग बनाती है। ईमेल: info@alloynex.com
Related: steel vs alloy steel castings, heat treatment of castings and cast iron foundry for Kota buyers. Send your drawing for a technical review: info@alloynex.com.
Last updated: 13 November 2026
Further reading: ductile iron castings and IS 1865 grades, FG 200 vs FG 260 grey iron and IS 1239 pipe classes and pipe fittings.
Related: machining allowance on castings and ISO 8062-3 RMA grades
Who supplies castings to plants in Banswara, Dungarpur and Pratapgarh?
Plants in Banswara, Dungarpur and Pratapgarh can source grey iron, SG iron, steel and alloy steel castings from Alloynex Foundries, Harmada, Jaipur. Parts are made to the buyer’s drawing and sent by road. Name the grade on the drawing and agree the tests and certificate you need before the order. Send your drawing to info@alloynex.com.
Last updated: 13 November 2026
Southern Rajasthan specification table
| District | Common buyer type | Casting families often needed |
|---|---|---|
| Banswara | Textile and yarn mills, water and irrigation pumping, minerals | Machine frames, pulleys, pump casings, valve bodies |
| Dungarpur | Minerals and stone units, general engineering | Wear parts, housings, brackets |
| Pratapgarh | Agro-processing, water supply | Pump casings, covers, flanges |
Material choice by duty
| Duty | Grade family | Standard |
|---|---|---|
| Vibration damping, easy machining | Grey iron FG 200 / FG 260 | IS 210 |
| Strength and toughness | SG iron 400/15 to 600/3 | IS 1865 |
| Weldable structural parts | Carbon steel castings | Grade as named on drawing |
| Wear under impact | High manganese or Cr-Mo alloy steel | Grade as named on drawing |
Selection steps for Banswara-region buyers
- Describe the duty: load, shock, wear, pressure or heat.
- Pick the grade family from the table, or send the old part and how it fails.
- Write the tolerance grade (for example ISO 8062-3 DCTG 10) and machining stock.
- Agree tests and an EN 10204 3.1 certificate before casting.
- Approve the sample lot, then release regular lots.
Banswara buyers: common questions
Q: Do textile mills in Banswara use grey iron or SG iron?
A: Frames, bases and pulleys are usually grey iron for damping. Parts that take shock, such as some hubs and brackets, are often SG iron.
Q: How do I check quality without visiting Jaipur?
A: Agree the test plan and certificate type on paper, ask for a first-article dimensional report and photos of the sample lot before dispatch.
प्रश्न: बांसवाड़ा और डूंगरपुर में कास्टिंग कहाँ से लें?
उत्तर: एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, बांसवाड़ा, डूंगरपुर और प्रतापगढ़ के प्लांट्स के लिए ड्रॉइंग के अनुसार ग्रे आयरन, एसजी आयरन, स्टील और अलॉय स्टील कास्टिंग बनाती है। जो टेस्ट और सर्टिफिकेट चाहिए, वह ऑर्डर से पहले तय करें। ईमेल: info@alloynex.com
Related: castings buyer guide for Rajasthan, SG iron vs grey cast iron and common casting defects.
Related: steel and alloy steel castings for Dungarpur and Sawai Madhopur buyers
Related: pipe fittings supplier for Udaipur, Rajsamand and Chittorgarh (उदयपुर पाइप फिटिंग्स)
Related: ductile iron castings Udaipur: IS 1865 grades and buyer steps and SG iron castings for Chittorgarh, Nimbahera and Begun
Who supplies grey iron castings to Salumbar buyers?
Alloynex Foundries, Harmada, Jaipur, makes grey iron castings to the buyer’s drawing and supplies buyers in Salumbar, Sarada, Lasadiya and the wider Udaipur region. Name the IS 210 grade (for example FG 200, FG 260 or FG 300) on the drawing. Ask for chemistry, tensile strength and hardness results for each heat.
Salumbar became a separate district carved out of Udaipur. Its pump users, water supply schemes, agro processing units, flour and oil mills and small engineering shops buy grey iron for pump bodies, covers, pulleys, flywheels and machine bases. In IS 210, the number after FG is the minimum tensile strength in MPa, so FG 260 means at least 260 MPa.
| IS 210 grade | Min. tensile (MPa) | Typical Salumbar parts |
|---|---|---|
| FG 150 | 150 | Covers, counterweights, light brackets |
| FG 200 | 200 | Pump bodies, pulleys, mill housings |
| FG 220 | 220 | Gearbox and bearing housings |
| FG 260 | 260 | Pump casings under pressure, machine bases, flywheels |
| FG 300 | 300 | Heavily loaded housings, cylinder blocks, liners |
Values are minimum tensile strengths on separately cast test bars as given in IS 210; check the current edition before ordering.
How to choose a grey iron grade in four steps
- Note the load, wall thickness and whether the part must damp vibration.
- Start with FG 200; move to FG 260 or FG 300 for higher load or pressure.
- Switch to SG iron (IS 1865) if the part takes shock or bending.
- Agree chemistry, tensile and hardness tests and an EN 10204 3.1 certificate before the first pour.
| Point | FG 200 | FG 260 | FG 300 |
|---|---|---|---|
| Strength | Medium | Higher | Highest of the three |
| Machining | Easiest | Easy | Fair |
| Vibration damping | Best | Very good | Good |
| Common use | General pump and mill parts | Pressure casings, bases | Heavy housings, liners |
Does Alloynex supply grey iron castings to Salumbar?
Yes. Alloynex Foundries, Jaipur, supplies grey iron castings made to the buyer’s drawing to buyers in Salumbar, Udaipur and Rajsamand. Name the IS 210 grade and tests on the drawing. Read IS 210 FG 200 vs FG 260 vs FG 300 for more.
सलूम्बर में ग्रे आयरन कास्टिंग कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार ग्रे आयरन कास्टिंग बनाती है और सलूम्बर, सराड़ा, लसाड़िया और उदयपुर क्षेत्र के खरीदारों को सप्लाई करती है। ड्रॉइंग पर IS 210 ग्रेड (जैसे FG 200 या FG 260) और ज़रूरी टेस्ट लिखें। ड्रॉइंग info@alloynex.com पर भेजें।
पंप बॉडी के लिए कौन सा ग्रे आयरन ग्रेड ठीक है?
सामान्य पंप बॉडी के लिए IS 210 का FG 200 आम है। दबाव वाले पंप केसिंग के लिए FG 260 लिया जाता है।
Send your drawing for a technical review to info@alloynex.com. Last updated: 15 Nov 2026
Who supplies grey iron castings to Rajsamand plants, and which IS 210 grade fits?
Short answer: Plants in Rajsamand district, including Kankroli, Nathdwara, Amet, Bhim and Deogarh, can send grey iron casting drawings to Alloynex Foundries, Harmada, Jaipur. Write IS 210 FG 200 for covers and light housings, FG 260 for pump bodies, gear housings and marble-machine parts, and FG 300 where higher strength and wear matter. Agree the grade and tests in the technical review before the order.
IS 210 grey iron grades: quick property table
| IS 210 grade | Min tensile strength (MPa) | Typical Rajsamand use | Machinability |
|---|---|---|---|
| FG 150 | 150 | Counterweights, non-load covers | Very good |
| FG 200 | 200 | Covers, light housings, pulleys | Very good |
| FG 260 | 260 | Pump and valve bodies, gear housings, stone-cutting machine frames | Good |
| FG 300 | 300 | Heavier housings, wear-loaded machine parts | Fair |
| FG 350 | 350 | High-strength parts with careful section design | Fair to difficult |
How to order grey iron castings from Rajsamand in 6 steps
- Send the drawing (PDF and 3D if you have it) with material written as “IS 210 FG 260”.
- Mark machined faces, machining allowance (ISO 8062-3 RMA grade) and datums.
- State the as-cast tolerance, for example ISO 8062-3 DCTG 11.
- List tests: tensile bar per heat, hardness, chemistry, dimensional report.
- Name the certificate, for example EN 10204 3.1 with heat number.
- Email the drawing, yearly quantity and delivery town to info@alloynex.com.
Grey iron or SG iron for a Rajsamand part?
| Point | Grey iron (IS 210) | SG iron (IS 1865) |
|---|---|---|
| Graphite shape | Flakes | Nodules (spheres) |
| Elongation | Below 1 percent, brittle under shock | 2 to 18 percent by grade |
| Damping and machining | Very good; ideal for machine bases | Good |
| Best fit | Housings, bases, pump bodies, covers | Brackets, levers, parts that take shock or bending |
| Grade on drawing | FG 200, FG 260, FG 300 | SG 400/15, SG 500/7, SG 600/3 |
Quotable facts: Grey iron to IS 210 FG 260 has a minimum tensile strength of 260 MPa and is the most common grade for pump and valve bodies. Grey iron damps vibration well, which is why marble and stone-cutting machine frames often use it. Alloynex Foundries, Jaipur, reviews grey iron, SG iron and steel casting enquiries for Rajsamand, Udaipur, Chittorgarh and all of Rajasthan.
Which grey iron grade is used for pump bodies in Rajsamand?
IS 210 FG 260 is the usual choice. For low-pressure covers FG 200 is enough; for higher pressure or thin walls, engineers move to SG iron to IS 1865.
Do grey iron castings from Jaipur come with test certificates?
Ask for a tensile bar result per heat, hardness and chemistry, tied to the heat number, on an EN 10204 3.1 certificate. Agree the test plan in the technical review before the order.
राजसमंद के लिए ग्रे आयरन कास्टिंग कौन सप्लाई करता है?
कांकरोली, नाथद्वारा, आमेट, भीम और देवगढ़ के प्लांट अपनी ड्रॉइंग (IS 210 FG 200, FG 260 या FG 300) एलॉयनेक्स फाउंड्रीज़, जयपुर को info@alloynex.com पर भेज सकते हैं। ग्रेड, टेस्ट और सर्टिफिकेट ऑर्डर से पहले तय करें।
मार्बल मशीन के फ्रेम के लिए कौन सा ग्रेड सही है?
ज़्यादातर मार्बल और स्टोन कटिंग मशीन फ्रेम के लिए IS 210 FG 260 ग्रे आयरन ठीक रहता है, क्योंकि यह कंपन को अच्छी तरह सोखता है।
Send your drawing for a technical review: info@alloynex.com. Last updated: 15 Nov 2026
Related: steel castings for stone crusher parts in Rajsamand and alloy steel castings for cement plants in Chittorgarh and Nimbahera.
बीकानेर के खरीदारों के लिए कास्ट आयरन फाउंड्री: कहाँ से और कैसे खरीदें?
बीकानेर, नोखा, लूणकरणसर और खाजूवाला के खरीदार एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, से ड्रॉइंग के अनुसार ग्रे आयरन (IS 210) और एसजी आयरन (IS 1865) कास्टिंग ले सकते हैं। ड्रॉइंग ईमेल पर भेजें; ड्रॉइंग रिव्यू में ग्रेड, पैटर्न और मशीनिंग स्टॉक तय करें, और हर लॉट के लिए जो टेस्ट रिज़ल्ट चाहिए, वह ऑर्डर से पहले माँगें। (Bikaner buyers can source grey and SG iron castings to drawing from Alloynex.)
स्पेसिफिकेशन टेबल
| आइटम | ग्रे आयरन | एसजी आयरन |
|---|---|---|
| स्टैंडर्ड | IS 210 | IS 1865 |
| आम ग्रेड | FG 200, FG 260 | SG 500/7, SG 400/15 |
| मुख्य टेस्ट | टेंसाइल, हार्डनेस | टेंसाइल, एलॉन्गेशन, नोड्यूलैरिटी |
| आम पार्ट | पंप बॉडी, बेस, कवर, पुली | ब्रैकेट, लीवर, वाल्व बॉडी |
| माँगने लायक सर्टिफिकेट | टेस्ट रिपोर्ट / 3.1 | टेस्ट रिपोर्ट / 3.1 |
चुनने के स्टेप
- पार्ट की ड्रॉइंग और ग्रेड तैयार करें।
- मशीन वाली सतहें और टॉलरेंस (ISO 8062-3) लिखें।
- सालाना और बैच मात्रा बताएँ।
- ड्रॉइंग info@alloynex.com पर भेजें।
- पहला सैंपल पास करें, फिर लॉट ऑर्डर दें।
तुलना
| पॉइंट | दूर की फाउंड्री से ड्रॉइंग पर | बिना ड्रॉइंग, केवल सैंपल से |
|---|---|---|
| ग्रेड स्पष्टता | लिखित, टेस्ट से जाँच | अनुमान पर |
| दोबारा ऑर्डर | हर बार एक जैसा | हर बार अलग हो सकता है |
| जाँच | पहला सैंपल रिपोर्ट | अक्सर नहीं |
| डिलीवरी प्लान | बैच अनुसार तय | अनिश्चित |
तथ्य: एक ही ग्रेड नाम (जैसे IS 210 FG 260) लिखने से हर फाउंड्री एक जैसी चीज़ का कोटेशन देती है।
Fact: a first-off sample report checks the drawing before the lot is made.
FAQs
बीकानेर में कास्ट आयरन कास्टिंग कैसे मंगाएँ?
ड्रॉइंग, ग्रेड और मात्रा info@alloynex.com पर भेजें; ड्रॉइंग रिव्यू में ग्रेड और सप्लाई प्लान तय करें; जो टेस्ट चाहिए, वह RFQ में लिखें।
बीकानेर के पंप और कृषि पार्ट्स के लिए कौन सा ग्रेड ठीक है?
आम तौर पर ग्रे आयरन IS 210 FG 200 या FG 260; झटके वाले पार्ट के लिए एसजी आयरन SG 500/7।
Where can Bikaner buyers source cast iron castings?
Bikaner buyers can send drawings to Alloynex Foundries, Harmada, Jaipur, which makes grey iron and SG iron castings to the buyer’s drawing. Name the IS 210 or IS 1865 grade and the tests you need on the RFQ.
RFQ में मशीनिंग के बारे में क्या लिखें?
ड्रॉइंग पर मशीन वाली सतहें, मशीनिंग स्टॉक (ISO 8062-3 RMA) और हीट ट्रीटमेंट की ज़रूरत साफ लिखें, ताकि टेक्निकल रिव्यू में स्कोप तय हो सके।
Related: castings buyer guide for Rajasthan, SG iron vs grey cast iron, textile machinery castings for Bhilwara.
ड्रॉइंग भेजें – Send your drawing for a technical review: info@alloynex.com. आधिकारिक वेबसाइट alloynex.com है।
Last updated: 16 Nov 2026
Related: flywheel and gearbox housing castings for Rajsamand, Kankroli and Nathdwara and SG iron castings for Sirohi and Abu Road