SG iron castings for Bhilwara are best sourced from a foundry that makes them to your drawing and grade, and proves the metal with a heat-linked test certificate. Alloynex Foundries in Harmada, Jaipur, makes SG (ductile) iron castings to the buyer’s drawing and supplies buyers in Bhilwara and across Rajasthan. Name the IS 1865 grade on the drawing.
This guide explains which SG iron grade suits common Bhilwara parts, how SG 400/15 differs from SG 500/7, which tests to ask for, and what to send with your enquiry. It is written for OEM engineers, maintenance heads and purchase teams in textile, pump, valve, mining and general engineering units.
Why Bhilwara plants use SG iron castings
Bhilwara is known for its textile mills and a wide base of engineering, pump, valve and mineral-processing units. Many of their parts take shock, vibration or bending load: brackets, hubs, gear blanks, pulleys, levers, housings and valve bodies. Grey iron is good for damping and machining, but it is brittle under impact. SG iron keeps the castability of iron and adds strength and stretch, because its graphite forms as round nodules instead of flakes.
In simple words: if a grey iron part keeps cracking, an SG iron grade is often the first change to review with your foundry. Our guide on SG iron vs grey cast iron explains the choice in detail.
SG iron grades to IS 1865: quick reference
IS 1865 names SG iron grades by minimum tensile strength (MPa) and minimum elongation (%). The table shows the common grades with nearest EN 1563 names and typical uses.
| IS 1865 grade | Min. tensile (MPa) | Min. elongation (%) | Nearest EN 1563 | Typical use |
|---|---|---|---|---|
| SG 350/22 | 350 | 22 | EN-GJS-350-22 | Parts that need very high toughness, low-temperature duty |
| SG 400/18 | 400 | 18 | EN-GJS-400-18 | Valve bodies, pressure parts, impact-loaded brackets |
| SG 400/15 | 400 | 15 | EN-GJS-400-15 | Textile machinery parts, pump and valve bodies, hubs |
| SG 450/10 | 450 | 10 | EN-GJS-450-10 | Housings and levers needing more strength |
| SG 500/7 | 500 | 7 | EN-GJS-500-7 | Gear blanks, pulleys, wheels, general engineering |
| SG 600/3 | 600 | 3 | EN-GJS-600-3 | Wear parts, crankshaft-type parts |
| SG 700/2 | 700 | 2 | EN-GJS-700-2 | High strength and wear duty |
SG 500/7 vs SG 400/15: which one should you choose?
SG 400/15 is mostly ferritic. It is softer, easier to machine and stretches up to 15% before breaking, so it handles shock and sudden load well. SG 500/7 has more pearlite in its matrix. It is stronger and wears better, but it stretches only about 7%. Choose 400/15 for parts that must not crack under impact, and 500/7 for parts that must carry more load or resist wear.
| Point | SG 400/15 | SG 500/7 |
|---|---|---|
| Matrix | Mostly ferrite | Ferrite and pearlite |
| Strength | Lower (400 MPa min.) | Higher (500 MPa min.) |
| Elongation | 15% min. | 7% min. |
| Impact and shock | Better | Lower |
| Wear life | Lower | Better |
| Machining | Easier | Slightly harder |
| Nearest ASTM A536 | 60-40-18 / 65-45-12 family | Between 65-45-12 and 80-55-06 |
How to source SG iron castings in Bhilwara: 6 steps
- Send the drawing with grade (for example IS 1865 SG 500/7), machined faces and tolerances.
- State weight and lot size per part and the yearly need, so the foundry can plan pattern and moulding.
- List the tests: chemistry, tensile and elongation, hardness, nodularity, dimensional check, and any NDT.
- Name the certificate, usually EN 10204 3.1, linked to the heat number. See our EN 10204 test certificates guide.
- Agree machining stock on each face before the pattern is made. Our machining allowance guide gives typical starting values.
- Approve a first-off sample against the drawing before lot supply starts.
Tests and checks for SG iron castings
A sound SG iron casting is proven by numbers, not by looks. The key checks are below.
| Check | What it proves |
|---|---|
| Chemical analysis | Carbon, silicon, manganese, sulphur, phosphorus and residual magnesium are within limits |
| Tensile and elongation test | The grade minimums are met on the test bar |
| Hardness (BHN) | Matrix and machinability are as expected |
| Microstructure / nodularity | Graphite is round enough for the grade |
| Dimensional inspection | Part matches the drawing and machining stock |
| Heat number marking | Every part can be traced to its certificate |
Where the drawing asks for it, SG iron may also be annealed or normalised to reach the required grade. Read more in our guide to heat treatment of castings.
भीलवाड़ा के खरीदारों के लिए एसजी आयरन कास्टिंग
एसजी आयरन (डक्टाइल आयरन) में ग्रेफाइट गोल गांठों के रूप में होता है, इसलिए यह ग्रे आयरन से ज़्यादा मज़बूत और कम भंगुर होता है। भीलवाड़ा की टेक्सटाइल मशीनरी, पंप, वाल्व और इंजीनियरिंग यूनिट्स में ब्रैकेट, हब, पुली, गियर ब्लैंक और वाल्व बॉडी के लिए IS 1865 के SG 400/15 और SG 500/7 ग्रेड सबसे ज़्यादा उपयोग होते हैं।
ऑर्डर देते समय ड्रॉइंग, ग्रेड, वज़न, मात्रा, ज़रूरी टेस्ट और EN 10204 3.1 सर्टिफिकेट ज़रूर लिखें। अपनी ड्रॉइंग तकनीकी समीक्षा के लिए info@alloynex.com पर भेजें।
Why buyers work with Alloynex for SG iron castings
- Castings made to the buyer’s drawing and material grade
- Testing to the grade, with documented results
- ISO 9001, ISO 14001 and ISO 45001 management systems
- Grey iron, SG iron, steel and alloy steel castings from one Jaipur source, plus rolled products, tubes, pipes and fittings
- Supply to Bhilwara, Chittorgarh, Ajmer, Udaipur, Jodhpur, Kota and the rest of Rajasthan, across India and for export
See all our casting services, including grey iron castings in Jaipur, or read the castings buyer guide for Rajasthan.
FAQs
Who makes SG iron castings for Bhilwara buyers?
Alloynex Foundries in Harmada, Jaipur, makes SG (ductile) iron castings to customer drawings for buyers in Bhilwara and across Rajasthan. Send your drawing to info@alloynex.com.
Which SG iron grade is common for textile machinery parts?
SG 400/15 and SG 500/7 to IS 1865 are the most common choices. Use 400/15 where the part takes shock or must not crack, and 500/7 where it needs more strength and wear life.
What tests should come with SG iron castings?
Ask for chemistry, tensile strength and elongation on a test bar, hardness, a nodularity check from the microstructure, dimensional inspection and an EN 10204 3.1 certificate linked by heat number.
Is SG iron the same as ductile iron?
Yes. SG (spheroidal graphite) iron, ductile iron and nodular iron are three names for the same family. The graphite is round, which gives far more strength and stretch than grey iron.
भीलवाड़ा में एसजी आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार एसजी (डक्टाइल) आयरन कास्टिंग बनाती है और भीलवाड़ा व पूरे राजस्थान के खरीदारों को सप्लाई करती है। ड्रॉइंग info@alloynex.com पर भेजें।
एसजी 400/15 और 500/7 में क्या अंतर है?
400/15 की टेन्साइल स्ट्रेंथ कम से कम 400 MPa और एलॉन्गेशन 15% है, इसलिए यह झटके सहने वाले पार्ट के लिए अच्छा है। 500/7 ज़्यादा मज़बूत (500 MPa) है पर एलॉन्गेशन 7% है।
Send your drawing for a technical review
Share your drawing, SG iron grade, weight, quantity and required tests at info@alloynex.com. Our engineers review every enquiry before we reply. You can also request a metallurgy consultation through our contact page.
Last updated: 14 November 2026
Further reading: all nine IS 1865 grades with proof stress values, FG 200 vs FG 260 vs SG 500/7 and IS 1239 pipe classes and pipe fittings.
Related: shrinkage porosity in SG iron castings: causes and prevention
Related: castings supplier for Tonk, Newai, Malpura and Deoli
Who makes SG iron castings for buyers in Sikar and Churu?
Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for buyers in Sikar, Churu and Jhunjhunu. Common IS 1865 grades are SG 400/15 (min. 400 MPa, 15% elongation) and SG 500/7 (min. 500 MPa, 7%).
SG iron spec table for Sikar and Churu parts
| IS 1865 grade | Min. tensile (MPa) | Min. elongation (%) | Typical hardness (HB, approx.) | Typical parts |
|---|---|---|---|---|
| SG 400/15 | 400 | 15 | 130 to 180 | Pump and valve parts, brackets under shock |
| SG 450/10 | 450 | 10 | 160 to 210 | Pipe fittings, housings, hubs |
| SG 500/7 | 500 | 7 | 170 to 230 | Gears, pulleys, farm machinery parts |
| SG 600/3 | 600 | 3 | 190 to 270 | Wear and high-strength parts |
How to source SG iron castings in Sikar and Churu
- Name the IS 1865 grade on the drawing.
- Mark the heaviest section and machined faces.
- Ask for tensile and elongation on a test bar from the same melt.
- Ask for nodularity and hardness checks.
- Ask for an EN 10204 3.1 certificate by heat number.
- Send the drawing to info@alloynex.com for a technical review.
SG iron vs grey iron for pump and farm machinery parts
| Point | SG iron (SG 500/7) | Grey iron (FG 260) |
|---|---|---|
| Min. tensile | 500 MPa | 260 MPa |
| Elongation | 7% minimum | Very low |
| Shock load | Handles it well | May crack |
| Damping | Lower | Very good |
More: SG iron vs grey cast iron and ductile iron castings and IS 1865 grades.
Does Alloynex supply SG iron castings to Sikar?
Yes. Alloynex makes SG iron castings to drawing for buyers in Sikar, Churu, Jhunjhunu and the rest of Rajasthan.
Which SG grade suits borewell pump parts?
SG 400/15 or SG 450/10 suit parts that take shock and pressure. SG 500/7 suits parts that need more strength and wear life.
सीकर और चूरू में एसजी आयरन कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ड्रॉइंग के अनुसार एसजी आयरन कास्टिंग बनाकर सीकर, चूरू और झुंझुनू के खरीदारों को सप्लाई करती है। ड्रॉइंग पर IS 1865 ग्रेड लिखें। ड्रॉइंग info@alloynex.com पर भेजें।
Last updated: 13 November 2026
Related: ERW and seamless pipes for Bhilwara and Ajmer plants
Who supplies grey and SG iron castings to Nagaur and Sirohi buyers?
Alloynex Foundries in Harmada, Jaipur, makes grey iron and SG iron castings to the buyer’s drawing for buyers in Nagaur, Makrana, Merta, Sirohi, Pindwara and Abu Road. Name the IS 210 or IS 1865 grade on the drawing. Every order starts with a drawing review. Ask for test results linked to the heat number and name the certificate type, for example EN 10204 3.1.
Grade decision matrix for Nagaur and Sirohi parts
| Part and working condition | Grade to review first | Why | Proof to ask for |
|---|---|---|---|
| Machine bases, covers and frames in marble and stone-cutting units (Makrana, Pindwara) | Grey iron IS 210 FG 200 or FG 260 | Good damping of vibration, easy to machine, stable shape | Chemistry, hardness, tensile test bar |
| Pump casings and pulleys for farm and water lines (Nagaur, Merta) | Grey iron IS 210 FG 260 | Steady pressure, wear on the bore, low shock | Hardness, pressure test if specified, dimensions |
| Brackets, hubs and arms that take shock (crushers, cement and mineral units in Sirohi) | SG iron IS 1865 SG 400/15 | High elongation, resists cracking under impact | Tensile and elongation, nodularity check |
| Gear blanks and wear parts that need strength | SG iron IS 1865 SG 500/7 | Higher strength and wear life than 400/15 | Tensile, hardness, nodularity, microstructure |
| Grey iron part that keeps cracking in service | Move to SG 400/15 or SG 500/7 | Round graphite stops cracks spreading | Review drawing and load with the foundry |
नागौर और सिरोही के खरीदार ग्रे और एसजी आयरन कास्टिंग कहाँ से लें?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, नागौर, मकराना, मेड़ता, सिरोही, पिंडवाड़ा और आबू रोड के खरीदारों के लिए ड्रॉइंग के अनुसार ग्रे आयरन और एसजी आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 210 या IS 1865 ग्रेड लिखें। मार्बल और स्टोन मशीनरी के बेस के लिए FG 260 और झटका सहने वाले पार्ट के लिए SG 400/15 अक्सर पहली पसंद होती है। अपनी ड्रॉइंग, ग्रेड, मात्रा और ज़रूरी टेस्ट info@alloynex.com पर भेजें।
Related guides for Nagaur and Sirohi buyers:
- IS 210 FG 200 vs FG 260 vs FG 300: choosing a grey iron grade
- SG iron vs grey cast iron: which one to choose
- All IS 1865 ductile iron grades with buyer checks
- Grey and SG iron foundry guide for Kota buyers
Send your drawing for a technical review at info@alloynex.com.
SG and grey iron castings for Nagaur and Sirohi: grade property table and quick facts
For Nagaur and Sirohi parts, Alloynex Foundries, Harmada, Jaipur, makes SG iron and grey iron castings to your drawing. Name the grade on the drawing, for example IS 1865 SG 500/7 or IS 210 FG 260. Ask for chemistry and tensile results for each heat, and nodularity for SG iron.
Quick-facts box
| Item | Detail |
|---|---|
| Materials | Grey iron IS 210, SG (ductile) iron IS 1865, steel and alloy steel castings |
| Made to | Customer drawing, grade and machining notes |
| Checks to ask for | Chemistry, tensile test bar, hardness, nodularity (SG iron), dimensions |
| Documents to ask for | Heat-linked test certificate; EN 10204 3.1 if needed |
| Systems | ISO 9001, ISO 14001, ISO 45001 |
| Towns served | Nagaur, Makrana, Merta, Kuchaman, Didwana, Sirohi, Pindwara, Abu Road |
| Enquiries | info@alloynex.com |
Grade and property table (minimum values from the standards)
| Grade | Standard | Min. tensile (MPa) | Min. 0.2% proof (MPa) | Min. elongation (%) | Typical hardness (HB, guide) |
|---|---|---|---|---|---|
| FG 200 | IS 210 | 200 | – | – | about 160-220 |
| FG 260 | IS 210 | 260 | – | – | about 180-230 |
| SG 400/15 | IS 1865 | 400 | 250 | 15 | about 130-180 |
| SG 500/7 | IS 1865 | 500 | 320 | 7 | about 170-230 |
Hardness ranges are typical guide values, not acceptance limits. The values on your order and the standard edition always govern.
District supply table: common parts by town
| Town | Typical industry | Common cast parts | Grade usually reviewed first |
|---|---|---|---|
| Makrana (marble belt) | Marble cutting and polishing | Machine bases, wheel hubs, covers | FG 260 for bases; SG 400/15 for hubs |
| Nagaur, Merta | Farm pumps, water lines, agro units | Pump casings, impellers, pulleys | FG 260 or SG 400/15 |
| Kuchaman, Didwana | Salt and mineral processing | Wear plates, brackets, housings | SG 500/7 or alloy steel as per wear |
| Pindwara, Sirohi | Cement and stone crushing | Crusher arms, brackets, gear blanks | SG 400/15 or SG 500/7 |
| Abu Road | Engineering and repair shops | Housings, flanges, covers | FG 200 or FG 260 |
Glossary
- Nodularity: share of round graphite in SG iron; higher nodularity gives more strength and elongation.
- Proof stress: stress at 0.2% permanent stretch, used as yield for SG iron.
- FG / SG: flake graphite (grey) iron and spheroidal graphite (ductile) iron.
- Test bar: sample poured from the same heat for the tensile test.
नागौर और सिरोही के लिए SG 400/15 या SG 500/7 कौन सा लें?
झटका सहने वाले हब, ब्रैकेट और क्रशर आर्म के लिए SG 400/15 (कम से कम 400 MPa, 15% एलॉन्गेशन) चुनें। ज़्यादा मज़बूती और घिसाव वाले गियर ब्लैंक के लिए SG 500/7 (कम से कम 500 MPa, 7% एलॉन्गेशन) चुनें। ड्रॉइंग info@alloynex.com पर भेजें।
Related: IS 210 grey iron grades, all IS 1865 grades, how to read a 3.1 certificate. Send your drawing for a technical review or request a metallurgy consultation.
Last updated: 14 November 2026
Who supplies SG iron castings to buyers in Chittorgarh?
Last updated: 14 November 2026
Short answer: Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for cement, mineral processing and engineering units in Chittorgarh, Nimbahera and Begun. Most parts are ordered in IS 1865 grade SG 400/15, SG 450/10 or SG 500/7. Send the drawing with the grade, and name the test certificates you need.
IS 1865 SG iron grades for Chittorgarh parts (general education)
| IS 1865 grade | Min. tensile (MPa) | Min. 0.2% proof (MPa) | Min. elongation (%) | Typical hardness (HB, guide) | Typical Chittorgarh-area parts |
|---|---|---|---|---|---|
| SG 350/22 | 350 | 220 | 22 | up to 160 | Parts that need high toughness at low temperature |
| SG 400/15 | 400 | 250 | 15 | 135 to 180 | Pump casings, valve bodies, water-line parts |
| SG 450/10 | 450 | 310 | 10 | 160 to 210 | Gearbox housings, bearing housings |
| SG 500/7 | 500 | 320 | 7 | 170 to 230 | Conveyor pulleys, hubs, crusher frames |
| SG 600/3 | 600 | 370 | 3 | 190 to 270 | Gears, sprockets, wear sleeves |
| SG 700/2 | 700 | 420 | 2 | 225 to 305 | High-strength wear parts |
Strength and elongation are minimums on test bars as per IS 1865. Hardness is a guide only. SG iron and ductile iron are the same material.
How a Chittorgarh buyer should order SG iron castings: 6 steps
- Write the grade on the drawing, for example “SG 500/7 to IS 1865”.
- Mark machined faces and the machining allowance you need.
- Say if the part sees impact or low temperature. If yes, choose SG 400/15 or SG 350/22.
- List the tests: chemistry, tensile, hardness and microstructure (nodularity).
- Ask for the certificate type, for example EN 10204 3.1.
- Approve samples first, then share a lot schedule for your plant shutdowns.
SG 500/7 vs grey iron FG 260 vs cast steel for cement-plant parts
| Point | SG iron SG 500/7 | Grey iron FG 260 | Cast steel IS 1030 280-520W |
|---|---|---|---|
| Min. tensile (MPa) | 500 | 260 | 520 |
| Elongation | About 7% min. | Almost none | About 18% min. |
| Impact and shock | Good | Poor | Very good |
| Vibration damping | Medium | High | Low |
| Machining | Easy | Easiest | Fair |
| Good for | Pulleys, hubs, housings | Bases, covers, frames | Heavy-shock and welded parts |
Quick facts for Chittorgarh SG iron buyers
- SG 500/7 means minimum tensile strength 500 MPa and minimum elongation 7%.
- SG iron gets its strength from round (spheroidal) graphite nodules.
- For shock loads, SG iron is a safer choice than grey iron.
Is SG 500/7 good for conveyor pulleys and hubs?
Yes. SG 500/7 gives a good mix of strength and toughness for pulleys, hubs and frames in cement and mineral plants. If the part takes heavy shock, ask about SG 450/10 or SG 400/15.
Does Alloynex deliver SG iron castings to Nimbahera and Begun?
Yes. Alloynex supplies castings to buyers across Rajasthan, including Chittorgarh, Nimbahera, Begun and nearby industrial areas. Send your drawing to info@alloynex.com to start.
चित्तौड़गढ़ में एसजी आयरन कास्टिंग कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, चित्तौड़गढ़, निम्बाहेड़ा और बेगूं के सीमेंट और इंजीनियरिंग यूनिट के लिए ड्रॉइंग के अनुसार एसजी (डक्टाइल) आयरन कास्टिंग बनाती है। आम ग्रेड IS 1865 के SG 400/15, SG 450/10 और SG 500/7 हैं।
सीमेंट प्लांट के पार्ट के लिए कौन सा एसजी ग्रेड लें?
पुली, हब और हाउसिंग के लिए SG 500/7 लें। झटके वाले पार्ट के लिए SG 400/15 लें। गियर और घिसाई वाले पार्ट के लिए SG 600/3 देखें।
Send your drawing for a technical review, or request a metallurgy consultation. Email info@alloynex.com with the drawing, grade, quantity per lot and the tests you need.
Related: SG 500/7 or grey iron for farm machinery castings in Hanumangarh and Sri Ganganagar
Who supplies SG iron castings in Beawar and Ajmer?
Short answer: Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to drawing for buyers in Beawar, Ajmer, Kishangarh, Nasirabad, Kekri and Bijainagar. Common grades are IS 1865 SG 400/15 for shock-loaded parts and SG 500/7 for strength and wear. Ask for chemistry, tensile strength, elongation and nodularity results for each heat.
Beawar and Ajmer have cement plants, mineral grinding units (feldspar, quartz and soapstone), marble and granite cutting units in Kishangarh, and pump and engineering workshops. Their parts take shock, vibration and wear, so the SG grade must match the job.
IS 1865 SG iron spec table for Beawar and Ajmer parts
| IS 1865 grade | Min. tensile (MPa) | Min. 0.2% proof stress (MPa) | Min. elongation (%) | Typical hardness (HB, approx.) | Typical Beawar and Ajmer parts |
|---|---|---|---|---|---|
| SG 400/15 | 400 | 250 | 15 | 135 to 180 | Crusher brackets, arms, valve bodies under shock |
| SG 450/10 | 450 | 310 | 10 | 160 to 210 | Pump casings, pipe fittings, hubs |
| SG 500/7 | 500 | 320 | 7 | 170 to 230 | Pulleys, gear blanks, grinding mill housings |
| SG 600/3 | 600 | 370 | 3 | 190 to 270 | Wear sleeves, sprockets, liners with low shock |
| SG 700/2 | 700 | 420 | 2 | 225 to 305 | High-strength wear parts |
Order data sheet: what to write for an SG iron casting
| Field | What to write | Example |
|---|---|---|
| Material and standard | Grade with the standard | SG 500/7 to IS 1865 |
| Drawing | Latest revision with machined faces marked | Rev C, faces A and B machined |
| Section size | Thinnest and heaviest wall | 8 mm to 40 mm |
| Tests | Chemistry, tensile, elongation, hardness, nodularity | Per heat |
| Certificate | Type of inspection document | EN 10204 3.1 by heat number |
| Quantity and schedule | Lot size and call-off | Sample lot, then monthly |
How to choose and order SG iron castings in Beawar and Ajmer
- Name the main load on the part: shock, steady load, wear or vibration.
- Pick the grade from the table: SG 400/15 for shock, SG 500/7 for general strength, SG 600/3 for wear.
- Write the grade and standard on the drawing, for example “SG 500/7 to IS 1865”.
- Mark machined faces, datums and machining allowance.
- List the tests and the EN 10204 certificate type you need.
- Approve a sample lot, then share the monthly or shutdown schedule.
- Email the drawing to info@alloynex.com for a technical review.
SG 400/15 vs SG 500/7 vs grey iron FG 260 for Beawar plant parts
| Point | SG 400/15 | SG 500/7 | Grey iron FG 260 (IS 210) |
|---|---|---|---|
| Min. tensile (MPa) | 400 | 500 | 260 |
| Min. elongation | 15% | 7% | Very low |
| Shock and impact | Best of the three | Good | Poor, may crack |
| Wear life | Fair | Good | Fair |
| Vibration damping | Medium | Medium | Very good |
| Typical use | Crusher arms, brackets, valve bodies | Pulleys, gear blanks, mill housings | Machine bases, covers |
Quick facts for Beawar and Ajmer buyers
- IS 1865 is the Indian standard for SG (spheroidal graphite) iron castings; EN 1563 is the European standard.
- SG 500/7 means minimum 500 MPa tensile strength and minimum 7% elongation.
- Nodularity shows how round the graphite is; poor nodularity lowers strength and elongation.
- Alloynex Foundries, Harmada, Jaipur, supplies SG iron castings to Beawar, Ajmer, Kishangarh, Nasirabad, Kekri and Bijainagar and works under ISO 9001, ISO 14001 and ISO 45001 systems.
FAQs: SG iron castings in Beawar and Ajmer
Who supplies SG iron castings in Beawar and Ajmer?
Alloynex Foundries, Harmada, Jaipur, makes SG (ductile) iron castings to the buyer’s drawing for buyers in Beawar, Ajmer, Kishangarh, Nasirabad and Bijainagar. Name the IS 1865 grade (for example SG 400/15 or SG 500/7) on the drawing.
Which SG iron grade suits crusher and grinding mill parts in Beawar?
SG 400/15 suits brackets, hubs and arms that take shock. SG 500/7 suits pulleys, gear blanks and housings that need more strength and wear life. SG 600/3 is for wear parts with little shock. Confirm the grade with a drawing review.
What does SG 500/7 mean on a drawing?
SG 500/7 to IS 1865 means a minimum tensile strength of 500 MPa and a minimum elongation of 7 percent, measured on a test bar cast from the same melt.
ब्यावर और अजमेर में एसजी आयरन कास्टिंग कौन सप्लाई करता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, ब्यावर, अजमेर, किशनगढ़ और नसीराबाद के खरीदारों के लिए ड्रॉइंग के अनुसार एसजी आयरन कास्टिंग बनाती है। ड्रॉइंग पर IS 1865 ग्रेड (जैसे SG 400/15 या SG 500/7) लिखें। ड्रॉइंग, ग्रेड और मात्रा info@alloynex.com पर भेजें।
Related: SG iron vs grey cast iron, all IS 1865 grades with proof stress, EN 10204 test certificates.
Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com.
Last updated: 15 November 2026
Related: rolled steel products for Bhilwara buyers: IS 2062 and IS 1079 grades, SG iron castings for Boranada, Jodhpur, pipe fittings for Basni, Jodhpur and ERW pipes for Bharatpur
Related: SG iron castings for Beawar: IS 1865 grade table, alloy steel castings for Chittorgarh cement plants and alloy steel castings for cement plants in Chittorgarh and Nimbahera.
Which grey iron grade suits counterweight castings for Bhilwara machines?
Answer: Counterweight castings for Bhilwara textile, pump and material-handling machines are usually ordered in grey cast iron to IS 210, grade FG 150 or FG 200, because the job needs mass and compact size, not high strength. Grey iron is dense (about 7.1 g/cm³), casts complex shapes in one piece and damps vibration. Alloynex Foundries, Jaipur, reviews counterweight drawings at info@alloynex.com.
Counterweight casting spec sheet
| Item | Typical choice | Why |
|---|---|---|
| Material | Grey iron to IS 210, FG 150 or FG 200 | Enough strength for a static mass; easy to cast and machine |
| Density for weight calculation | About 7.0 to 7.2 g/cm³ | Use about 7.1 for early weight estimates; steel is about 7.85 |
| Weight tolerance | Agreed on the drawing, for example ± a set percentage | Balancing needs a known mass, not just size |
| Soundness | No large shrinkage cavities | Hidden voids reduce weight and shift the centre of gravity |
| Machined faces | Mounting face and bolt holes only | Keeps cost of ownership and lead time down |
| Finish | Shot blasted and primed or painted | Rust control on the shop floor |
How to specify a counterweight casting: 5 steps
- State the target mass and the allowed weight band, and mark the centre of gravity if it matters.
- Name the material: grey iron to IS 210, FG 150 or FG 200 (FG 260 only if the part also carries load).
- Mark only the faces that must be machined, and add an ISO 8062-3 tolerance note for the rest.
- Ask for weight check on each piece or on a sample plan, plus hardness and chemistry on the heat.
- State finish and marking (part number, heat number) and send the drawing for review.
Grey iron vs SG iron vs fabricated steel for counterweights
| Point | Grey iron casting (IS 210) | SG iron casting (IS 1865) | Fabricated steel plate |
|---|---|---|---|
| Density | About 7.1 g/cm³ | About 7.1 g/cm³ | About 7.85 g/cm³ |
| Complex shape in one piece | Yes | Yes | Needs cutting and welding |
| Shock resistance | Low | High | High |
| Best for | Static counterweights, balance masses | Counterweights that also take impact or bolt load | Simple flat stacks, one-off jobs |
FAQs: counterweight castings for Bhilwara
Why are counterweights made of grey iron and not steel?
A counterweight needs mass and shape more than strength. Grey iron casts complex shapes in one piece, machines easily and damps vibration, so it suits most static counterweights.
How is the weight of a counterweight casting controlled?
The drawing states a target mass and a weight band. The foundry checks weight on each piece or on an agreed sample plan, and sound feeding avoids hidden shrinkage voids.
काउंटरवेट कास्टिंग के लिए कौन सा ग्रे आयरन ग्रेड लें?
ज़्यादातर स्थिर काउंटरवेट के लिए IS 210 का FG 150 या FG 200 ग्रेड काफ़ी है। अगर पार्ट पर लोड या झटका भी आता है, तो FG 260 या SG आयरन पर विचार करें।
भीलवाड़ा से काउंटरवेट कास्टिंग की ड्रॉइंग कहाँ भेजें?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर को info@alloynex.com पर ड्रॉइंग, लक्ष्य वज़न, वज़न की सीमा और मात्रा भेजें। टीम तकनीकी समीक्षा करके जवाब देती है।
Read next: IS 210 FG 200 vs FG 260 vs FG 300, SG iron vs grey cast iron and ISO 8062 casting tolerances. Send your drawing for a technical review to info@alloynex.com.
Last updated: 15 November 2026
SG iron castings for Bhilwara: who checks what (responsibility matrix)
For IS 1865 SG iron castings, quality is shared: the buyer fixes the grade and acceptance rules, the foundry proves chemistry, nodularity and tensile results per heat, and the buyer’s receiving team checks dimensions, marking and the certificate. Writing these roles down before the first order avoids most disputes with Bhilwara textile, pump and valve parts.
Last updated: 16 Nov 2026
| Task | Buyer design | Foundry | Buyer receiving / QA |
|---|---|---|---|
| Grade on drawing, e.g. IS 1865 SG 500/7 | Responsible | Consulted at review | Informed |
| Tolerance and machining allowance (ISO 8062-3) | Responsible | Consulted | Informed |
| Chemistry and magnesium treatment per heat | Informed | Responsible | Reviews certificate |
| Nodularity and microstructure | Sets minimum | Responsible, reports | Reviews report |
| Tensile, proof stress and elongation on test bar | Sets grade | Responsible, reports | Reviews; may witness |
| First article dimensional report | Approves | Responsible | Checks key sizes |
| Heat number marking and EN 10204 3.1 certificate | Names certificate type | Responsible | Matches heat number to certificate |
| Non-conformance and corrective action | Decides use-as-is or reject | Root cause and fix | Records and tracks |
Fact: IS 1865 SG 400/15 means at least 400 MPa tensile strength and 15% elongation; SG 500/7 means 500 MPa and 7%.
Related: FG 260 grey iron castings for Sikar buyers · marble machinery castings in Kishangarh · textile machinery castings in Bhilwara
Send your drawing for a technical review and the matrix can be agreed with the first order: info@alloynex.com.
Related: tractor hub castings for Hanumangarh: SG iron grade table