IS 1239 vs IS 3589 Pipe: Difference and How to Choose

IS 1239 vs IS 3589: which pipe standard should I use?

Quick answer: Use IS 1239 (Part 1) for pipes from 15 NB to 150 NB in Light, Medium or Heavy class for water, gas, air and low-pressure service. Use IS 3589 for larger pipes from 168.3 mm to 2540 mm OD, specified by OD and wall thickness in grades Fe 330, Fe 410 or Fe 450, for water mains and sewage.

CheckIS 1239 (Part 1)IS 3589
Size range15 NB to 150 NB168.3 mm to 2540 mm OD
Specified byNB and class (Light, Medium, Heavy)OD and wall thickness
GradesMild steel tubesFe 330, Fe 410, Fe 450
MakeERW or seamlessERW, SAW or seamless
Typical usePlumbing, fire branch lines, air, gasWater mains, sewage, large fire mains

Rule of thumb: up to 150 NB use IS 1239; above 150 NB use IS 3589.

Worked example: two lines, two standards

A 100 NB fire branch line falls under IS 1239 Part 1; buyers often order Heavy class. A 219.1 mm OD water main falls under IS 3589; name the OD, wall thickness and grade such as Fe 410. Rule: 150 NB and below is IS 1239; 168.3 mm OD and above is IS 3589.

Send your drawing for a technical review: info@alloynex.com. Last updated: 19 Nov 2026.

Who supplies MS pipes in Jhalawar?

Direct answer: Alloynex Foundries, Harmada, Jaipur, supplies MS ERW pipes for buyers in Jhalawar, Jhalrapatan, Bhawani Mandi and Aklera. Name IS 1239 or IS 3589 in your order. Use IS 1239 Part 1 medium (blue band) or heavy (red band) class up to 150 NB, and IS 3589 for larger water mains. Send your list to info@alloynex.com.

ProductMS (mild steel) ERW pipes, black or galvanised
Up to 150 NBIS 1239 Part 1: light, medium, heavy class
Larger mainsIS 3589 by OD and wall thickness
Documents to ask forTest certificates with heat numbers
Service areaJhalawar, Jhalrapatan, Bhawani Mandi, Aklera
Contactinfo@alloynex.com
  1. Write NB size, class and length.
  2. Say black or galvanised, screwed or plain end.
  3. Send the list for a technical review.

Send your drawing for a technical review. Last updated: 18 Nov 2026.

IS 1239 or IS 3589: which pipe should I order?

Order IS 1239 (Part 1) for pipes from 15 NB to 150 NB in Light, Medium or Heavy class, for water, gas, air and low-pressure lines. Order IS 3589 for larger pipes from 168.3 mm to 2540 mm OD, in Fe 330, Fe 410 or Fe 450, for water mains and sewage.

Decide in 60 seconds: if this, then that

  1. If the pipe is 150 NB or smaller, then order IS 1239 (Part 1).
  2. If the pipe is 168.3 mm OD or larger, then order IS 3589.
  3. If you need screwed and socketed ends, then order IS 1239 with screwed ends.
  4. If the line is a large water main or sewer, then order IS 3589 and state lining and coating.
  5. Always state class (IS 1239) or grade and wall thickness (IS 3589) on the order.

Myth vs fact

Common beliefWhat is true
Heavy class IS 1239 is the same as IS 3589.They are two different standards for two size ranges.
All MS pipes have the same strength.IS 3589 grades set the minimum tensile strength: 330, 410 or 450 MPa.
The colour band does not matter.IS 1239 uses colour bands for class: yellow for Light, blue for Medium, red for Heavy.

Send your drawing for a technical review: info@alloynex.com.

Last updated: 20 November 2026

Short answer: IS 1239 Part 1 covers mild steel tubes from 6 to 150 NB (up to 165.1 mm OD) in Light, Medium and Heavy wall classes, mainly for water, gas, air and steam service. IS 3589 covers larger steel pipes for water and sewage from 168.3 mm to 2540 mm OD, in grades Fe 330, Fe 410 and Fe 450. Choose by size first, then by pressure and service.

Both are Indian Standards from BIS, and both appear on Rajasthan tenders and plant line lists. Buyers mix them up because both are “MS pipe”. This page explains the difference in plain words, so you can write the right standard on your order. Alloynex Foundries, Harmada, Jaipur, supplies tubes and pipes to the standard and grade on your drawing.

What is the difference between IS 1239 and IS 3589?

The main difference is size range and how strength is chosen. IS 1239 Part 1 is a small-bore standard with one steel quality, where you choose wall thickness by class. IS 3589 is a large-diameter standard where you choose the steel grade and the wall thickness for the pressure of your main.

PointIS 1239 Part 1IS 3589
Full title (short)Mild steel tubes, tubulars and other wrought steel fittings: Part 1 TubesSteel pipes for water and sewage
Size range6 to 150 NB (10.2 to 165.1 mm OD)168.3 to 2540 mm OD
How size is givenNominal bore (NB) + classOutside diameter (OD) + wall thickness
Strength choiceOne steel quality; wall class sets the pressure marginGrade Fe 330, Fe 410 or Fe 450
Wall optionsLight, Medium, HeavySeveral walls per OD, chosen by the buyer
MarkingColour band: yellow Light, blue Medium, red HeavyStencil marking with grade, size and wall
Made asERW or seamlessMostly welded: ERW for smaller sizes, submerged arc welded (straight or spiral) for larger sizes
EndsPlain, or screwed and socketed; black or galvanisedPlain or bevelled for butt welding
Typical usePlumbing, fire lines, compressed air, low-pressure steam, small process linesWater mains, pumping lines, sewage and effluent lines
Matching fittingsIS 1239 Part 2 screwed or welded fittingsButt-weld fittings and flanges for the pipe OD and wall

What does IS 1239 Part 1 cover?

IS 1239 Part 1 covers welded and seamless mild steel tubes from 6 NB to 150 NB. Every size comes in up to three wall classes. Light class is available up to 100 NB; Medium and Heavy go up to 150 NB. The outside diameter stays the same across classes, so the bore changes with the wall.

Nominal boreOD (mm)Light wall (mm)Medium wall (mm)Heavy wall (mm)
25 NB33.72.63.24.0
50 NB60.32.93.64.5
100 NB114.33.64.55.4

Values are nominal wall thicknesses from IS 1239 Part 1 for education. Check the current edition and tolerances on your order. Tubes are hydrostatically tested as the standard requires, and galvanised tubes are often used for potable water and fire lines.

What does IS 3589 cover?

IS 3589 covers steel pipes for water and sewage from 168.3 mm OD up to 2540 mm OD. The buyer chooses a grade and a wall thickness from the standard’s tables, based on working pressure, surge, burial depth and corrosion allowance. Coating and lining are specified separately on the order.

IS 3589 gradeMin. tensile strength (MPa)Where it is often used
Fe 330330Low-pressure gravity and sewage lines
Fe 410410Most pumped water mains and rising mains
Fe 450450Higher-pressure mains where a thinner wall is wanted

The grade number is the minimum tensile strength in MPa. Yield strength, elongation and hydro-test pressure follow the tables in the standard.

Where do IS 1239 and IS 3589 meet?

They meet at the 150 mm size, but they do not overlap. IS 1239 ends at 150 NB with 165.1 mm OD. IS 3589 starts at 168.3 mm OD, the same OD as ASME 6 inch pipe. A 165.1 mm tube and a 168.3 mm pipe need different fittings, so never mix them on one line without a transition piece.

How do you choose between IS 1239 and IS 3589?

  1. Fix the size. Up to 150 NB, use IS 1239 Part 1. At 168.3 mm OD and above, use IS 3589.
  2. For IS 1239, choose the class: Medium for most plant water and air lines, Heavy for higher pressure, buried or threaded lines, Light only for low-duty work.
  3. For IS 3589, choose the grade (Fe 330, Fe 410 or Fe 450) and wall from your design pressure and surge.
  4. Choose ends: screwed and socketed or plain for IS 1239; plain or bevelled for IS 3589.
  5. State coating: black, galvanised (IS 1239), or the external coating and internal lining for IS 3589.
  6. Name tests and certificate: hydro test, chemistry, tensile, and EN 10204 3.1 tied to heat number.

Which standard suits which service? A decision matrix

ServiceUsual choiceWhy
Factory water and compressed air, 15 to 100 NBIS 1239 MediumCommon sizes, threaded or welded joints
Fire hydrant ring main up to 150 NBIS 1239 HeavyThicker wall for pressure and burial
Pumped water main, 200 NB and aboveIS 3589 Fe 410Grade and wall chosen for pressure
Sewage or effluent gravity line, large ODIS 3589 Fe 330Low pressure, large bore
Steam above low pressure, or hot process lineASTM A106 Gr B seamlessNeither IS 1239 nor IS 3589 is the usual choice for hot, high-pressure steam

What should you write on an IS 1239 or IS 3589 order?

Write one clear line per size, for example: “50 NB, IS 1239 Part 1, Heavy, ERW, black, screwed and socketed, 6 m random, EN 10204 3.1” or “323.9 mm OD x 6.3 mm wall, IS 3589 Fe 410, welded, bevelled ends, EN 10204 3.1”. Add quantity in metres, delivery city and any third-party inspection.

Alloynex supplies tubes, pipes and matching pipe fittings from Jaipur to buyers in Jaipur, Jodhpur, Udaipur, Kota, Ajmer, Bhilwara, Alwar, Bhiwadi, Bikaner and across India, under ISO 9001, ISO 14001 and ISO 45001 systems. See also our steel tubes and pipes page, ERW vs seamless pipes, EN 10204 test certificates and rolled steel products.

IS 1239 vs IS 3589: frequently asked questions

Is IS 3589 pipe stronger than IS 1239 pipe?

IS 3589 lets you choose the strength: Fe 330, Fe 410 or Fe 450, with minimum tensile strength of 330, 410 or 450 MPa. IS 1239 Part 1 has one steel quality and gives pressure margin through the Light, Medium or Heavy wall class.

Can I use IS 1239 pipe above 150 NB?

No. IS 1239 Part 1 stops at 150 NB (165.1 mm OD). Larger water and sewage lines are usually ordered to IS 3589, which starts at 168.3 mm OD.

Do IS 1239 fittings fit IS 3589 pipe?

Not as a rule. IS 1239 Part 2 fittings are for small-bore screwed or welded tubes. IS 3589 pipe is joined by butt welding or flanges sized to its own OD and wall.

Which certificate should I ask for with IS 1239 or IS 3589 pipe?

Ask for an EN 10204 3.1 inspection certificate tied to the heat number, showing chemistry, tensile results and the hydrostatic or NDT test result.

IS 1239 और IS 3589 पाइप में क्या अंतर है?

IS 1239 पार्ट 1 छोटे पाइप (6 से 150 NB) के लिए है, जिनकी दीवार लाइट, मीडियम या हेवी क्लास में होती है। IS 3589 बड़े पानी और सीवेज पाइप (168.3 mm OD से 2540 mm OD) के लिए है, जिनमें Fe 330, Fe 410 या Fe 450 ग्रेड चुना जाता है।

पानी की मेन लाइन के लिए कौन सा पाइप मंगाएँ?

150 NB तक की लाइन के लिए IS 1239 मीडियम या हेवी, और 168.3 mm OD या उससे बड़ी मेन लाइन के लिए IS 3589 Fe 410 आम चुनाव है। अंतिम ग्रेड अपने डिज़ाइन प्रेशर से तय करें।

Send your line list for a technical review

Send your drawing or line list for a technical review at info@alloynex.com, or request a metallurgy consultation. Our team checks size, standard, class or grade and certificate needs before anything else.

Last updated: 14 November 2026

Related: IS 2062 vs IS 1079 rolled steel: which to specify, ERW pipe supplier for Kota, Bundi, Baran and Jhalawar and rolled steel products for Ajmer, Kishangarh and Beawar buyers

Who supplies ERW pipes in Jaipur to IS 1239 or IS 3589?

Quick answer: Alloynex Foundries, Harmada, Jaipur, supplies ERW tubes and pipes to IS 1239 Part 1, IS 3589, ASTM A53 Type E and API 5L, as named on your line list. Ask for chemistry and tensile results, a hydro or NDT record where the standard needs it, and your named EN 10204 certificate.

Jaipur buyers in VKI, Sitapura, Bagru and Kaladera usually need ERW pipe for water, compressed air, fire lines, utility headers and structural frames. The first decision is the standard, because it fixes size range, wall basis and tests.

StandardWhat it coversWall or class basisTypical Jaipur use
IS 1239 Part 1Mild steel tubes, small bore up to 150 NBLight, Medium, Heavy classes (colour band)Water, air and gas lines, plant utilities
IS 3589Steel pipes for water and sewage, from 168.3 mm ODWall thickness by size; grades Fe 330, Fe 410, Fe 450Water mains, cooling water, large headers
ASTM A53 Type EWelded (ERW) steel pipe, Grade A or BASME B36.10M schedulesGeneral process and utility lines on export or EPC jobs
API 5L PSL1 ERWLine pipeSchedule or specified wallOil, gas and water transmission spools

How to buy ERW pipe in Jaipur: 6 steps

  1. Write the standard and grade, for example IS 1239 Part 1, Medium or IS 3589 Fe 410.
  2. Give the size as NB with class, or OD with wall thickness, and the length (random or fixed).
  3. State end finish: plain, bevelled for welding or screwed and socketed.
  4. Ask for the hydrostatic test or NDT the standard requires, and any extra test your client needs.
  5. Name the certificate type, such as EN 10204 3.1, and ask for heat numbers on every length.
  6. Send fittings and any cast valve or pump parts on the same list so one review covers the full line.

Comparison: ERW to IS 1239, ERW to IS 3589 and seamless pipe

PointERW, IS 1239 Part 1ERW, IS 3589Seamless, ASTM A106 Gr B
Size rangeSmall bore, up to 150 NBLarger OD, from 168.3 mmWide range by schedule
Weld seamYesYesNo seam
Best fitUtilities, air, water, gasWater mains and large headersHigh pressure and high temperature
Key checkClass, hydro test, markingWall thickness, hydro test, weld qualityChemistry, tensile, hydro or NDT

FAQs: ERW pipe supplier in Jaipur

Can I get IS 1239 and IS 3589 ERW pipes from one supplier in Jaipur?

Yes. Alloynex Foundries, Jaipur, supplies ERW tubes and pipes to the standard named on your line list, including IS 1239 Part 1 for small bore lines and IS 3589 for larger water and process lines, together with fittings and castings.

What documents should come with ERW pipes bought in Jaipur?

Each length should carry marking with standard, grade, size and heat number. Ask for chemistry and tensile results tied to the heat, the hydrostatic or NDT record where the standard requires it, and the EN 10204 certificate type you named on the order.

जयपुर में ईआरडब्ल्यू पाइप खरीदते समय क्या जाँचें?

पाइप पर मानक, ग्रेड, साइज़ और हीट नंबर की मार्किंग देखें। केमिस्ट्री और टेन्साइल रिपोर्ट, जहाँ मानक माँगे वहाँ हाइड्रो टेस्ट रिकॉर्ड, और ऑर्डर में लिखा EN 10204 सर्टिफिकेट माँगें।

When should a Jaipur plant use seamless pipe instead of ERW?

Use seamless pipe, for example ASTM A106 Grade B, for high pressure, high temperature or cyclic service such as boiler and steam lines, or where your code or client asks for seamless. ERW suits water, air, utility and most structural lines.

Read next: ERW vs seamless pipes, steel tubes and pipes and EN 10204 test certificates.

Last updated: 14 November 2026

Related: seamless pipe supplier for Kota plants: ASTM A106, A53 Type S and A335 grades

Related: MS pipes to IS 1239 and IS 3589 for Churu, Sardarshahr and Ratangarh buyers

Related: ERW or seamless steel pipe for Barmer and Balotra plants

Related: MS pipes and rolled steel for Jhunjhunu and Sikar buyers and pipe fittings for Sikar, Beawar and Jhunjhunu

Related: rolled steel products for Kotputli-Behror: IS 2062 and IS 1079 grade tables

Related: pipe fittings for Kota plants: IS 1239 Part 2, ASME B16.9 and B16.11 matched to the pipe

Who supplies ERW pipes to buyers in Bharatpur?

Answer: ALLOYNEX FOUNDRIES, Jaipur, supplies ERW steel pipes and tubes for buyers in Bharatpur, Deeg and nearby areas, with mill test certificates. Name the standard in your order: IS 1239 Part 1 (light, medium or heavy class, up to 150 NB) or IS 3589 for larger water and structural lines. Send size, class and quantity to info@alloynex.com.

ERW pipe specification table for Bharatpur

StandardSize range (general)Classes / gradesTypical Bharatpur use
IS 1239 Part 16 NB to 150 NBLight (A), Medium (B), Heavy (C)Water, air and gas lines; tube-well and pump connections
IS 3589168.3 mm to 2540 mm ODFe 330, Fe 410, Fe 450Water mains and larger process lines
IS 1161Structural tube sizesYST 210, YST 240, YST 310Sheds, frames, scaffolding
IS 4923Square and rectangular hollow sectionsYSt 210, YSt 310Fabricated structures and frames

How to order ERW pipes for Bharatpur in 5 steps

  1. Name the standard (IS 1239, IS 3589, IS 1161 or IS 4923).
  2. Give the nominal bore or OD and the class or wall thickness.
  3. State ends: plain, bevelled, screwed and socketed; black or galvanised.
  4. List tests: hydrostatic test and mill test certificate with heat number.
  5. Give length, quantity and delivery point in Bharatpur or Deeg.

IS 1239 vs IS 3589 vs seamless pipe

PointIS 1239 (ERW)IS 3589 (ERW/SAW)Seamless (e.g. ASTM A106)
SizeUp to 150 NB168.3 mm OD and aboveMostly small and medium sizes
WallBy class: light, medium, heavyBy chosen thicknessBy schedule
Best forWater, air, gas service linesWater mains, large linesHigh-pressure or high-temperature lines

Quotable: “IS 1239 covers ERW pipes up to 150 NB in light, medium and heavy classes; IS 3589 covers larger pipes from 168.3 mm OD.” “Every ERW pipe order should name standard, size, class, ends and certificate.”

FAQs

Which ERW pipe class should a Bharatpur buyer choose for water lines?
IS 1239 medium (B) class is common for general water service; heavy (C) is used where pressure or corrosion allowance is higher.

Can ERW pipes be supplied galvanised to Bharatpur?
Yes, state black or galvanised in the RFQ along with the ends and length.

भरतपुर में ईआरडब्ल्यू पाइप कौन सप्लाई करता है?
ALLOYNEX FOUNDRIES, जयपुर, भरतपुर और डीग के खरीदारों को ईआरडब्ल्यू पाइप मिल टेस्ट सर्टिफिकेट के साथ सप्लाई करती है। ऑर्डर में IS 1239 या IS 3589 लिखें।

IS 1239 और IS 3589 पाइप में क्या फर्क है?
IS 1239 छोटे साइज़ (150 NB तक) के लाइट, मीडियम, हैवी क्लास पाइप के लिए है; IS 3589 बड़े साइज़ (168.3 mm OD से ऊपर) के पानी और स्ट्रक्चरल पाइप के लिए है।

Related: ERW vs seamless pipes · pipe fittings guide

Next step: Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. State grade, size, quantity, tests and delivery town.

Last updated: 15 Nov 2026

Who is an ERW pipe supplier for Bundi, and which IS 1239 class should you order?

Quick answer: Alloynex Foundries, Harmada, Jaipur, supplies ERW steel pipes and matching fittings to Bundi and the Kota–Bundi belt, checked against your standard, size and wall. For water, air and utility lines up to 150 NB, order IS 1239 Part 1 Medium class; use Heavy for higher pressure or threading, and IS 3589 above 168.3 mm OD.

Last updated: 15 Nov 2026

Size (IS 1239 Part 1)OD approx.Light wallMedium wallHeavy wall
25 NB33.7 mm2.6 mm3.2 mm4.0 mm
50 NB60.3 mm2.9 mm3.6 mm4.5 mm
80 NB88.9 mm3.2 mm4.0 mm4.8 mm
100 NB114.3 mm3.6 mm4.5 mm5.4 mm
150 NB165.1 mmNot made4.8 mm5.4 mm
IS 1239 Part 1 nominal walls for Bundi ERW pipe orders (education; check current edition).

How to order ERW pipe for a Bundi site:

  1. List each line with fluid, working pressure and whether it is buried or above ground.
  2. Pick the standard: IS 1239 Part 1 up to 150 NB; IS 3589 Fe 330, Fe 410 or Fe 450 from 168.3 mm OD.
  3. Pick class or wall: Medium for most plant and farm water lines, Heavy for threading and higher pressure.
  4. State finish and ends: black or galvanised; plain, bevelled or screwed and socketed.
  5. Ask for hydro test results and an EN 10204 3.1 certificate tied to the heat, then send the list to info@alloynex.com.
PointIS 1239 Part 1 (ERW)IS 3589 (welded)
Size range6 to 150 NB168.3 to 2540 mm OD
How strength is chosenWall class: Light, Medium, HeavyGrade Fe 330, Fe 410, Fe 450 plus wall
Typical Bundi usePlant water, air, irrigation branches, building servicesWater mains and large transfer lines
Matching fittingsIS 1239 Part 2Butt weld or flanged, sized to OD
IS 1239 vs IS 3589 for Bundi buyers.

Does Alloynex supply ERW pipes to Bundi?

Yes. Alloynex Foundries, Jaipur, supplies ERW steel pipes, tubes and matching pipe fittings to Bundi, Kota and all Rajasthan districts. Send your line list to info@alloynex.com.

Which IS 1239 class is right for a Bundi water line?

Medium class suits most plant and farm water lines. Choose Heavy for higher pressure, deep threading or buried runs; Light only for low-pressure, non-critical lines.

बूंदी में ईआरडब्ल्यू पाइप कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, बूंदी और कोटा क्षेत्र में IS 1239 और IS 3589 के अनुसार ईआरडब्ल्यू स्टील पाइप और फिटिंग्स भेजती है। सूची info@alloynex.com पर भेजें।

IS 1239 में मीडियम और हेवी पाइप में क्या फर्क है?

फर्क दीवार की मोटाई का है। 50 NB पर मीडियम 3.6 mm और हेवी 4.5 mm होता है। ज़्यादा प्रेशर या थ्रेडिंग के लिए हेवी लें।

Related: ERW vs seamless pipes · pipe fittings for Balotra and Barmer. Send your drawing for a technical review.

Related: seamless and ERW tubes supplier for Pali and Jaisalmer: boiler, heat-exchanger and mechanical tubes and ERW tubes for Pali buyers: IS 3601, IS 1161 and IS 4923

Related: pipe reducers and flanges supplier for Jhunjhunu: ASME B16.9, B16.5 and IS 6392, alloy steel pressure parts castings for Pali (WCB, WC6, WC9), EN-GJS-500-7 SG iron castings for Udaipur and steel castings for sugar mills in Sri Ganganagar.

Who is an MS pipe supplier for Jhalawar, and which class should you order?

Alloynex Foundries, Harmada, Jaipur, supplies MS (mild steel) ERW pipes for Jhalawar, Jhalrapatan, Bhawani Mandi and Aklera. Name IS 1239 or IS 3589 in your order. For water, irrigation and building services up to 150 NB, order IS 1239 Part 1 medium (blue band) or heavy (red band) class. For larger water mains, order IS 3589 by outside diameter and wall thickness. Last updated: 16 Nov 2026.

Jhalawar usePipe to orderStandardNote
Borewell and farm irrigationMedium class, galvanised if buriedIS 1239 Part 1Threaded and socketed
Building water and fire linesHeavy class (red band)IS 1239 Part 1Thicker wall for pressure
Town and industrial water mainsERW pipe by OD and thicknessIS 3589Sizes above 150 NB
Sheds and structuresHollow sectionsIS 4923 / IS 1161Not for pressure

5 steps to order MS pipe for Jhalawar

  1. Write NB size, class (light, medium, heavy) and length.
  2. Say black or galvanised, and screwed or plain end.
  3. Name the standard: IS 1239 Part 1 up to 150 NB, IS 3589 for larger mains.
  4. Ask for test certificates with heat numbers.
  5. Send the list with fittings and flanges to info@alloynex.com.
Class (IS 1239)Colour bandTypical use
LightYellowLow pressure, non-critical
MediumBlueWater and gas services
HeavyRedHigher pressure, buried lines

FAQs

Which MS pipe class is used for water lines in Jhalawar?

IS 1239 Part 1 medium class (blue band) for normal water services, and heavy class (red band) where pressure is higher or the pipe is buried.

झालावाड़ में एमएस पाइप कौन सप्लाई करता है?

एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, झालावाड़, झालरापाटन और भवानी मंडी के लिए एमएस ERW पाइप सप्लाई करती है। ऑर्डर में IS 1239 या IS 3589 लिखें। साइज़, क्लास और मात्रा info@alloynex.com पर भेजें।

मीडियम और हैवी क्लास पाइप में क्या फर्क है?

हैवी क्लास (लाल पट्टी) की दीवार मीडियम क्लास (नीली पट्टी) से मोटी होती है, इसलिए वह ज़्यादा दबाव और ज़मीन के नीचे की लाइन के लिए ली जाती है।