How do you buy iron and steel castings from a Rajasthan foundry?
To buy iron or steel castings in Rajasthan, send the foundry a drawing with tolerances, the material standard and grade, machining scope, heat treatment, test needs, certificate type and quantity. Pick grey iron for damping and easy machining, SG iron for toughness, and steel or alloy steel for strength, weldability, wear or heat.
This guide is for design engineers, QA heads and buyers at OEMs and Tier-1 suppliers who source castings from Jaipur, Bhiwadi, Neemrana, Kota, Udaipur, Jodhpur and the rest of Rajasthan. It keeps the steps simple, so your first lot is right.
Which casting material fits your part?
| Material | Indian standard | Main strength | Typical parts |
|---|---|---|---|
| Grey cast iron | IS 210 | Damping, easy machining, heat conduction | Machine beds, housings, covers, brake parts |
| SG iron (ductile iron) | IS 1865 | Strength, toughness, bends before breaking | Hubs, brackets, gears, valve and pump parts |
| Carbon steel castings | As named on drawing | Strength and weldability | Structural parts, flanges, levers |
| Alloy steel castings | As named on drawing | Wear, heat or high-strength duty | Gears, wear parts, high-load parts |
Compare in detail: SG iron vs grey cast iron and steel vs alloy steel castings.
What should a casting RFQ include?
- 2D drawing with all dimensions and tolerances; a 3D model if you have one.
- Material grade and the standard it follows (IS, EN or ASTM).
- Hardness or mechanical property needs.
- Heat treatment needs, if any.
- Machining scope: as-cast, rough machined or fully machined.
- Surface finish, painting or coating.
- Yearly and monthly quantity, and first sample quantity.
- Inspection and test needs, and the certificate type for each lot.
How do you check the grade is real?
A grade on paper means little without tests. Typical checks for castings are chemical analysis of the melt, tensile test on a test bar cast with the parts, hardness on the casting, microstructure (for SG iron, nodularity), and dimensional inspection against the drawing. Alloynex reviews each drawing for grade and tests before work starts. Ask for the test results you need in your order.
Know your paperwork: EN 10204 test certificates explained.
How do you avoid defects and machining trouble?
| Risk | What to agree early |
|---|---|
| Shrinkage and porosity | Even walls, generous fillets, no sudden section jumps |
| Black spots after machining | Datums and machining allowance before pattern making |
| Distortion or hard spots | Heat treatment route, such as stress relief or normalising |
| Rejects at incoming QC | A written inspection plan and sample lot approval |
Read more: common casting defects and prevention, machining allowance on castings and heat treatment of castings.
Common mistakes in casting enquiries
- Writing only ‘cast iron’ or ‘MS casting’ with no standard or grade.
- Sending a drawing without tolerances or datums.
- Not stating the machining scope, so the foundry guesses the allowance.
- Agreeing the certificate type after the lot is made.
- Skipping a sample lot and going straight to regular supply.
Each gap leads to a re-quote, a re-test or a rejected lot. A complete RFQ saves weeks.
Why source castings from within Rajasthan?
A nearby foundry shortens transit and makes audits, first-article checks and drawing reviews easier. Alloynex Foundries in Jaipur makes grey iron, SG iron, steel and alloy steel castings, rolled products, tubes, pipes and fittings to the buyer’s drawing, for pumps and valves, heavy engineering, railways, power and process plants, under ISO 9001, ISO 14001 and ISO 45001 systems. OEMs in the Bhiwadi belt can follow our Bhiwadi and Neemrana sourcing guide.
FAQs
Which casting material should I choose?
Grey iron for damping and easy machining, SG iron for strength and toughness, carbon steel for strength and weldability, and alloy steel for wear, heat or high-strength duty. A technical review of the drawing confirms the choice.
Which standards cover iron castings in India?
IS 210 covers grey cast iron and IS 1865 covers SG iron. Always write the standard and grade on the drawing.
What test certificate should I ask for?
Agree the certificate type before ordering. EN 10204 type 3.1 is a common choice, issued by the maker’s own inspection, with actual test results for the lot.
What does a foundry need to quote?
A 2D drawing with tolerances, a 3D model if available, grade and standard, machining scope, heat treatment, tests, documents and yearly and sample quantity.
Does Alloynex make pipes and fittings too?
Yes. Alloynex makes tubes, pipes and pipe fittings to drawing, along with rolled steel products and castings.
राजस्थान से कास्टिंग कैसे खरीदें?
फाउंड्री को टॉलरेंस सहित ड्रॉइंग, मटेरियल स्टैंडर्ड और ग्रेड, मशीनिंग का दायरा, हीट ट्रीटमेंट, टेस्ट, सर्टिफिकेट का प्रकार और मात्रा भेजें। कंपन और आसान मशीनिंग के लिए ग्रे आयरन, मज़बूती के लिए SG आयरन, और ताकत, वेल्डिंग या घिसाव के लिए स्टील या अलॉय स्टील चुनें। Alloynex, जयपुर: info@alloynex.com
Send your drawing for a technical review or request a metallurgy consultation: email info@alloynex.com or use our contact page.
Last updated: 12 November 2026
Related: cast iron foundry for Kota buyers
What is a complete castings sourcing checklist for buyers in India?
Quick answer: A complete checklist fixes seven things before the order: the drawing with an ISO 8062-3 tolerance grade, the material grade and standard, the machining allowance, the test plan with an EN 10204 certificate type, sample approval, marking and packing, and the papers for each lot. Put each one in writing.
Last updated: 13 November 2026
The seven-point sourcing checklist
| # | Check | What to write | Example |
|---|---|---|---|
| 1 | Drawing and tolerance | General casting tolerance grade per ISO 8062-3 | General tolerance ISO 8062-3 DCTG 10 |
| 2 | Material | Grade and standard | SG 500/7 to IS 1865 or FG 260 to IS 210 |
| 3 | Machining allowance | RMAG grade or mm per face | ISO 8062-3 RMAG F, or 3 mm per machined face |
| 4 | Tests and certificate | Tests per heat and certificate type | Tensile, hardness, chemistry; EN 10204 3.1 |
| 5 | Samples | Sample quantity and approval route | First-article report on 5 pieces before the lot |
| 6 | Marking and packing | Heat number, part number, protection | Cast-on heat code, rust-preventive oil, crates |
| 7 | Lot papers | What comes with each dispatch | Certificate, inspection report, packing list |
ISO 8062-3 has 16 tolerance grades, DCTG 1 to DCTG 16, and 10 machining allowance grades, RMAG A to K. Sand castings in iron and steel usually sit in the middle and upper grades; machined faces carry the allowance on top of the tolerance.
Decision tree: which certificate type do you need?
- Is the part non-critical and from a known source? Yes: type 2.1 (statement of compliance) may be enough. No: go to step 2.
- Do you need test values, but not for your own lot? Yes: type 2.2 (typical test results). No: go to step 3.
- Do you need actual results for your heat or lot? Yes: type 3.1, signed by the maker’s independent inspection person.
- Must your client or a third party witness and co-sign? Yes: type 3.2, signed by both sides.
EN 10204 certificate types compared
| Type | Name | Test results | Who signs |
|---|---|---|---|
| 2.1 | Declaration of compliance | No results | Manufacturer |
| 2.2 | Test report | Non-specific (typical) results | Manufacturer |
| 3.1 | Inspection certificate 3.1 | Specific results for your lot | Maker’s inspection person, independent of production |
| 3.2 | Inspection certificate 3.2 | Specific results for your lot | Maker’s inspection person and buyer’s or third-party inspector |
Type 3.1 is the most common certificate for engineering castings. To read one line by line, see our guide on EN 10204 test certificates. For allowance values, see machining allowance on castings.
Castings sourcing: common questions
What is ISO 8062-3 DCTG on a casting drawing?
DCTG is the dimensional casting tolerance grade from ISO 8062-3. There are 16 grades, DCTG 1 (tightest) to DCTG 16 (loosest). The tolerance band widens as the nominal size grows. Write one general DCTG on the drawing and tighter values only where needed.
Which EN 10204 certificate should I ask for with castings?
Ask for type 3.1 for most engineering castings. It gives actual test results for your heat, signed by an inspection person independent of production. Ask for 3.2 only when your client or a third party must witness and co-sign.
Can Alloynex help with castings sourcing from India?
Yes. Alloynex Foundries, Jaipur, makes grey iron, SG iron, steel and alloy steel castings to drawing and supports buyers across India. Send your drawing for a technical review to info@alloynex.com.
हिंदी में सवाल-जवाब
प्रश्न: मिल टेस्ट सर्टिफिकेट (MTC) कैसे पढ़ें?
उत्तर: पहले सर्टिफिकेट का टाइप देखें (EN 10204 2.1, 2.2, 3.1 या 3.2)। फिर हीट नंबर को कास्टिंग पर लिखे नंबर से मिलाएँ। उसके बाद केमिकल कम्पोज़िशन और टेन्साइल, यील्ड, एलोंगेशन व हार्डनेस के मान को ड्रॉइंग के ग्रेड से मिलाएँ।
प्रश्न: भारत से कास्टिंग खरीदते समय क्या जाँचें?
उत्तर: ड्रॉइंग पर ISO 8062-3 टॉलरेंस ग्रेड, मटेरियल ग्रेड और स्टैंडर्ड, मशीनिंग अलाउंस, टेस्ट प्लान और EN 10204 3.1 सर्टिफिकेट लिखें, और पहले सैंपल अप्रूव करें।
Request a metallurgy consultation. Email your drawing and checklist to info@alloynex.com. Alloynex Foundries, Harmada, Jaipur, works to ISO 9001, ISO 14001 and ISO 45001 systems and supplies castings across Rajasthan and India.
Where can buyers in Tonk get iron and steel castings made to drawing?
Buyers in Tonk, Newai, Malpura and Deoli can source grey iron, SG iron, steel and alloy steel castings from Alloynex Foundries in Harmada, Jaipur, about 100 km by road. Parts are made to drawing and grade and an EN 10204 certificate agreed on the order. Email info@alloynex.com.
Last updated: 13 November 2026
Tonk district: casting specification table
| Field | What to send | Example for a Tonk buyer |
|---|---|---|
| Drawing | 2D with tolerances, or a sample part | Pulley or bearing housing drawing |
| Grade | Standard and grade | IS 210 FG 260 or IS 1865 SG 500/7 |
| Weight per piece | From drawing or sample | Weighed sample |
| Machining | As cast or machined faces | Bore and faces machined |
| Tests | Chemistry, tensile, hardness | Per heat |
| Certificate | EN 10204 type | 3.1 |
| Delivery | Plant address in the district | Tonk, Newai, Malpura or Deoli |
Which casting fits common Tonk parts?
| Part | Material family | Reason |
|---|---|---|
| Machine bases and covers | Grey iron FG 200 / FG 260 | Damping and easy machining |
| Pump casings for water lines | Grey iron or SG iron | SG iron where pressure or shock |
| Hubs, brackets, levers | SG iron 500/7 | Strength and toughness |
| Wear parts for crushers and stone units | Alloy steel or high manganese steel | Wear life under impact |
Steps to place a first order from Tonk
- Email the drawing or a photo of the sample with key sizes to info@alloynex.com.
- Get a drawing review on grade, machining stock and tolerance grade.
- Approve the method and the sample quantity.
- Check sample parts and the test results.
- Release regular lots; ask for heat numbers and certificates with each lot.
Tonk buyers: common questions
Q: Is a Jaipur foundry practical for Tonk plants?
A: Yes. Tonk is about 100 km from Jaipur by road, so drawing reviews, sample checks and plant visits are easy to plan.
Q: What if I have only an old part and no drawing?
A: Send the part details and key sizes. The drawing review confirms sizes, grade and tolerances with you in writing before any pattern is made.
प्रश्न: टोंक में कास्टिंग कौन सप्लाई करता है?
उत्तर: एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, टोंक, निवाई, मालपुरा और देवली के खरीदारों के लिए ड्रॉइंग के अनुसार ग्रे आयरन, एसजी आयरन, स्टील और अलॉय स्टील कास्टिंग बनाती है। ईमेल: info@alloynex.com
Related: SG iron vs grey cast iron, cast iron foundry for Kota buyers and machining allowance on castings.
Related: grey iron castings supplier for Ajmer, Kishangarh and Beawar
Related: pipe fittings for Bikaner and Rajsamand buyers: grades, standards and order steps
Related: rolled steel products for Ajmer, Kishangarh and Beawar buyers and ERW pipe supplier for Kota, Bundi, Baran and Jhalawar
Related: pipe fittings supplier for Udaipur buyers and IS 210 grey iron castings for Alwar and Bhiwadi
Related: agricultural machinery castings for Hanumangarh and Sri Ganganagar: grade guide and steel castings for Sirohi and Abu Road buyers
Related district guides: SG iron castings for Beawar and Ajmer, grey iron castings for Balotra and Barmer, rolled steel products for Kotputli-Behror and ductile iron castings for Jhalawar and Baran.
Related: SG iron castings for Boranada, Jodhpur, pipe fittings for Basni, Jodhpur, ERW pipes for Bharatpur and rolled steel products for Bhilwara buyers
Who makes steel castings for sugar mills in Sri Ganganagar?
Direct answer: Alloynex Foundries, Harmada, Jaipur, makes steel and alloy steel castings to drawing for sugar mill and allied plant users in Sri Ganganagar, Hanumangarh, Suratgarh and Raisinghnagar. Typical grades are IS 1030 280-520W or ASTM A216 WCB for gear blanks, hubs and housings, and IS 2644 Cr-Mo steel for heavily loaded wear parts. Every order starts with a drawing and grade review.
Sugar mill castings: part, grade and test table
| Part (example) | Common material (general education) | Standard | Key check |
|---|---|---|---|
| Gear blanks, pinion blanks | Carbon steel | IS 1030 280-520W / ASTM A216 WCB | Tensile, hardness, UT where asked |
| Heavily loaded wear parts | Cr-Mo alloy steel | IS 2644 | Hardness after heat treatment |
| Hubs, bearing housings | Carbon steel or SG iron | IS 1030 / IS 1865 SG 500/7 | Dimensions, hardness |
| Covers, frames, pedestals | Grey iron | IS 210 FG 260 | Hardness, visual |
| Juice and water pump bodies | SG iron or carbon steel | IS 1865 / ASTM A216 WCB | Pressure test as per pump standard |
Quotable fact: IS 1030 280-520W means a minimum yield of 280 MPa and minimum tensile strength of 520 MPa, and the W marks a weldable grade.
How to order sugar mill castings in 6 steps
- Collect the drawing, or the worn part with key sizes.
- Write the grade and standard, such as IS 1030 280-520W.
- Mark machined faces and the hardness range.
- List tests and the EN 10204 certificate type.
- Approve the first-off casting against the drawing.
- Plan lots around the off-season maintenance window.
Steel vs alloy steel vs SG iron for sugar mill parts
| Point | Carbon steel | Cr-Mo alloy steel | SG iron |
|---|---|---|---|
| Strength | Good | Higher after heat treatment | Good |
| Shock load | Good | Good | Moderate |
| Weld repair | Yes | Yes, with pre-heat | Limited |
| Typical use | Gear blanks, hubs | Wear parts | Pulleys, housings |
FAQs: sugar mill castings in Sri Ganganagar
Who makes steel castings for sugar mills in Sri Ganganagar?
Alloynex Foundries, Harmada, Jaipur, makes carbon steel, alloy steel, grey iron and SG iron castings to drawing for sugar mill and allied plant users in Sri Ganganagar, Hanumangarh, Suratgarh and Raisinghnagar.
Which grades are used for sugar mill castings?
As general education: carbon steel to IS 1030 280-520W or ASTM A216 WCB for gear blanks, hubs and bearing housings; Cr-Mo alloy steel to IS 2644 for heavily loaded wearing parts; grey iron to IS 210 FG 260 for covers and frames; SG iron to IS 1865 SG 500/7 for pulleys and housings.
When should spares be ordered for the crushing season?
Send drawings well before the off-season maintenance window, so pattern work, first-off approval and testing finish before the crushing season starts.
What should a sugar mill casting enquiry include?
The drawing, grade and standard, quantity, machined faces, hardness range, tests and certificate type, sent to info@alloynex.com.
श्रीगंगानगर में शुगर मिल के लिए स्टील कास्टिंग कौन बनाता है?
एलॉयनेक्स फाउंड्रीज़, हरमाड़ा, जयपुर, श्रीगंगानगर, हनुमानगढ़, सूरतगढ़ और रायसिंहनगर के शुगर मिल और उससे जुड़े प्लांट के लिए ड्रॉइंग के अनुसार स्टील, अलॉय स्टील, ग्रे आयरन और एसजी आयरन कास्टिंग बनाती है।
शुगर मिल कास्टिंग के लिए कौन सा ग्रेड चुनें?
गियर ब्लैंक और हब के लिए IS 1030 280-520W या ASTM A216 WCB, घिसाव वाले भारी पार्ट के लिए IS 2644 Cr-Mo स्टील, और कवर व फ्रेम के लिए IS 210 FG 260 ग्रे आयरन आम हैं। अंतिम ग्रेड आपकी ड्रॉइंग तय करती है।
Related guides: IS 1030 steel casting grades, heat treatment of castings, steel vs alloy steel castings.
Send your drawing for a technical review or request a metallurgy consultation at info@alloynex.com. Alloynex Foundries, P.No. 17, Bheruji Nagar, Road No. 14, Harmada, Jaipur 302013, works under ISO 9001, ISO 14001 and ISO 45001 systems.
Last updated: 16 Nov 2026
Related: राजस्थान में कास्टिंग सप्लायर: ग्रे आयरन, एसजी आयरन और स्टील कास्टिंग गाइड (हिंदी), SG iron hydraulic castings for Bhiwadi OEMs, compressor body castings in Jaipur and झुंझुनू में पाइप फिटिंग्स और फ्लैंज.
Related: flywheel and gearbox housing castings for Rajsamand, SG iron castings for Sirohi and Abu Road, seamless pipe supplier for Bhilwara and MS pipe supplier for Jhalawar